Post your Success Stories with Chinese Miracle software here

[Infinity-Box]

Dear Customers,

As we all have experienced the miracle our chinese miracle software can produce to service Chinese Made Phones we would like to you to post your success storys here

Some Guideline

1) Not more than 4 lines
2) How you were benfited by Infinity Box Chinese miracle software
3) How our support has been this is your comment for our future customers

[:::..CyBoRg..:::]

nice updates.....for the chinese miracle of infinity...but my problems is i have no cable for it ......the cable is available for the market...co'z chinese miracle have diffirent pinout and cables....i have one cable that i modify for n95....but i want a set of new cable for the chinese miracle for infinity....i hope it have alraedy...i mean "the manufaturing of cables of inifinity for the market"...co'z other box supported chinese miracle also....it has all cables for it..i hope inifinity will support the cables also.....thanks

[ASHIF]

im very much thankful to infinityteam for supporting chinese fones cos chinese miracle software gave me new field in gsmsoftware ..i have repaired so many chinese fone with this software that i never seen before...i salute infinity team for that great great software..Support of infinityteam is great and always helpful for user of infinity box.

[deepakgarg]

lots of money with these chinese phones.cant say anything else

[sayyedikram]

i have sussefully slove restart problem more than 80 to 100 phone infinity is best 4 chiniese miracle but cable probem i have made 1 cable 4rm moto c115 serial cable just find out rx and tx and make desire operation

[JC_BY]

http://forum.gsmhosting.com/vbb/showthread.php?p=2843904#post2843904

I succesfully solved my problem with PDA A818 wich was restarting with sim card inside. Even it wasn't supported by CM 1.62 I was lucky to read fullflash and send it to support. I had quick reply from them and today I see new version CM 1.63 wich supports this new firmware! New update was cooked in 48 hours! I would highly appreciate Infinity team for their hard and usefull work!
Thank you very much!

[ashok_kumar459]

i solved problem more 100 problem thanks infinity.we no need tx rx guide. we need only pinout. when ever i am posting i get reply from u that is tx rx guide . plase dont send further. need only pinout.

[CPUKILLER]

Dear Customers,

As we all have experienced the miracle our chinese miracle software can produce to service Chinese Made Phones we would like to you to post your success storys here

Some Guideline

1) Not more than 4 lines
2) How you were benfited by Infinity Box Chinese miracle software
3) How our support has been this is your comment for our future customers

im an infinity customer since they use to support panasonic phones only and not TO mention pana X70 WAS A BIG DEAL AT THAT TIME and ofcourse we have benifited from infinity chinese miracle but to repair complete range of china phones we need to have other boxes too which support other cpu types e.g. ADI, AGER, TI and SKY chip series so if infinity wants to be number 1 they must add these cpu types to chinese miracle soft because other china boxes are pretty cheap against infinity as far as chinese phones are concerned but if we see overall then infinity is a very good multiphone unlock and repair device so again i would say infinity people there is tough competition still and we wont stop either ,,,helping by sending flash backups to infinity for better support as i send flash backups with pinouts almost every second day so please add more cpu platforms to chinese miracle to support more chinese phone types i say so because nobody likes having more and more boxes and managing so many softwares is also a problem when it comes to professionalism and quick service---regards -cpukiller-----------------------------------------------------------------------------------------------------------------------------------------------------and sorry for writing more than 4 lines but i had to say it

[higherzman]

it's great great solution for chinese phones i've repaired many N73 and other chinese model with blinking and completly dead state but we need the pinout of cable or internal pinouts

thank's

salam

[DVD B@ppy]

Infinity Is one of the Box That have lots of support.Once I dead a mobile named CECT-Z800+ With VE dongle
After One Month I retive my Dead Mobile With Infinity Without Display Blank and make call.I didnt find Correct frameware In Support Side.Unable to manage same mobile.But thanks Only Infinity makes alive without display that other cant did it.

[Aamir_Zia]

Infinity BOX is one of the Best Boxes ever produced .

I repair more than 1500 phones with only Chinese Miracle .... :)

[Kashif Khan]

I am fixing all the chines phone's problems with infinity without any problem.
I love with this amazing product.
BR
Kashif Khan

[moncef5]

Infinity it s the only best and the first in the the world i slove many a chines phones problems thank a lot Infinity team

[freeman2001]

with infinity support
with rx tx gnd
never stop revive dead china phone :)

[snsoftkiller]

Good work !!!
I always repair with my simple jtag cable 3 wires compatible with any universal cable.
Very simple to use and clear documentation !!!

Offtopic-----------------
@Kashif Khan
Its me in the avatar :P

[AZUKA]

infinity team have have brougt my hope back in ithe gsm industry

[MUSSARIN]

Hai How Flash China Miracle Phones Then Wich Box

[zeel_zeel]

Chinese Miracle has proved to be one of the best software available to repair china phones. Have tested on lot of mobiles. Infinity is GREAT.

[MGT SOFTWARE]

COM2 [Serial1] selected
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A02:8A01]...
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: Y560.JGH.6226.L01.F04.D21.C0.U1.V1.01
Version: YW26_05C_HW
detecting structure #2...
done
imei: 13579024681122
connection Ok
building list...
done
items to clear: 163
warning: wrong packet cs
warning: wrong packet cs
162 of 163 items cleared
0 items remains
Finished, time used: 69 sec
Remove/Install battery now !

[mondano202]

succesfull repair two unit n95 chinaphone.formating ffs via chinese miracle software.and one pda n95.


thank for the verygood support and quick reply for those beginer user.
thanks for ur friendly usermanual...



more power infinity team hoping more update to come..

[amit_varietymob]

when i was new to chinese mobile i lost my 2 boxes of infinity in r&d which i replace later,now i am earning more money with infinity box . Now with d help of infinity team i learn how to make cable . I am using just single com cable for every chinese phone. This not with only chinese phone but many others. com solution is easy only u need to know which is rx,tx.Keep rocking great team.More power to us.

[MGT SOFTWARE]

now infinity is very greaty, but what we need is the good cable test by you and sell to your reseller with your emblem not chinese copy cable

[SiLver*GSM]

Repair & Format Done 4 ZTC-N38
connector_1x12
5: Gnd
6: Rx
7: Tx
PIN OUT TESTED 100%

Regards,
SiLverGSM

[c_ahmad79]

infinity box best box i ever have
i had fix many many many chines phones with this box i use super doctor box for cable and i use chinese miracle software
this is really amazing box
keep it up infinity team

[soshan]

infiniti is a good box but we need pin out.

[SiLver*GSM]

CECT Q86 DONE ::Flash& Format FFS::
connector_1x18
1.........18
1: Gnd
2: Gnd
7: Tx
9: Rx
PIN OUT TESTED 100%

COM50 [VCP0] selected
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A02:8A01]...
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: E558_P2ARAB.01.1_26S01
Version: M500Z_05C_HW
detecting structure #2...
done
imei: 13579024681122
connection Ok
building list...
done
items to clear: 166
warning: wrong packet cs
163 of 166 items cleared
building list...
done
3 items remains
Finished, time used: 50 sec
Remove/Install battery now !

Regards,
SiLverGSM

[zahid_gsm]

im very much thankful to infinityteam for supporting chinese fones cos chinese miracle software gave me new field in gsmsoftware great solution for chinese phones i've repaired many N73 many many fone repair with great tool i love infinity bcaz infinity is really infinity

thanx infinity team

[imran tec]

just rehot hote the cpu all chines dead stes thy come alive , and is ithere any lady mobile technician registered in gsm hosting

[sago]

infinity is small money BIGsupport

[.::BHATTI::.]

Yes its the great Box paying little money earning more and more money ... i Love this BOX... i used inifinty Almost with other every software .. its FTDI CHip makes my work far easy ... last days i got my inifnty FTDI damage but i make it repair within hour .. cozz it is in my daiyl use .. i have repaired Lots of chinese phones and other brands ... what is used to do is :

Read Documentation and JOB DONE :D:D:D

Its like a Fairy for me with MAGIC STICK(FTDI)

[SiLver*GSM]

Bluetooth N95 DONE ::Flash& Format FFS::
connector_1x18
1.........18
1: Gnd
2: Gnd
7: Tx
9: Rx
PIN OUT TESTED 100%

COM1 [Serial0] selected
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A02:8A01]...
chip: 0031:ED46:DCB5
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: MAUI.06B.W07.12.MP.V32
Version: M500Z_06B_HW
detecting structure #2...
done
imei: 35410100011212
connection Ok
building list...
done
items to clear: 137
137 of 137 items cleared
building list...
done
0 items remains
Finished, time used: 21 sec
Remove/Install battery now !

Infinity is Best TOOl 4 Chinese Phones

Regards,
SiLverGSM

[andi_gsm2002]

COM11 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22212200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22212200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detecting eeprom area in 1 chip(s)...
flash: 01227E22212200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [eeprom]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom_200 71211-111321.B0E.bin
flash: 01227E22212200:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.604AAFDF.[U4_PCB01_GPRS_MT6226_S01.UP6226V01B12.BIN_3805A5E8].rpl
identification detection finished
Area: Firmware
flash: 01227E22212200:29EA0000000000
Write: Firmware
structure: 2nd [standard] (or higher) generation
structure: 2nd [standard] (or higher) generation
protocol ver: 04
ver. sw1: TCL26_05C_PCB01_GPRS_MT6226_S01.N910_26B_VI115_020 6.BIN
ver. sw2: N910_26B_VI115_0206
ffs offset/size: 00E00000/00200000
Write Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log __TCL26_05C_PCB01_GPRS_MT6226_S01.N910_26B_VI115_0 206.BIN_FFFFFFFF_20071211-112130.B0X.bin
Finished, time used: 783 sec
Remove/Install battery now !

Thx infinity team now my phone live again.

[zeerik]

to day i repair restart problem of sands a203 with these steps

1= read full flash for backup

2=click ffs (safe)

3= rewrite imei

4= ( *#0044# send )set lang to Englash (if needed)

i used this rx.tx.gnd

[bonny]

hello people i also bought N38 yesterday. But dont know anything about it. Can anybody tell me which games/softwares and Videos run on it. Also are there PC suite kind of software for N38???

[ketan.d.chauhan]

I am fixing all the chines phone's problems with infinity without any problem.
I love with this amazing product.

[digitized]

AS LIKE NAME OF THIS SOFTWARE IT HAS NO LIMIT ...........................THANKS FOR THIS PRODUCT ......................AND FOR GOOD SUPPORT.......:cool:

[persiano]

this is my first post. I don't know is this forum is the correct one.

I bought a chinese telephone IPod-CECT A380 with fingerprint recognition.

I need to transfer my phonebook from my old phone (Nokia 6610i) to the new one. There is a program I can use?
thanks.
Regards.

[Infinity-Box]

this is my first post. I don't know is this forum is the correct one.

I bought a chinese telephone IPod-CECT A380 with fingerprint recognition.

I need to transfer my phonebook from my old phone (Nokia 6610i) to the new one. There is a program I can use?
thanks.
Regards.

If you have infinity box ,
use handset manager to manage phonebook
this handset manager is only for chinese phones

[mobilegsm30]

hello infinity team can this cpu support N75 nokia see pic.

[Edwins c]

///////////////////////////////// off topic

which pinout did you use for n88,
i also want to suggest that some OF your successn need to come with the solution, pls post your succesess with how it worked so that others may benefit from it
INFINITY IS ON

[persiano]

If you have infinity box ,
use handset manager to manage phonebook
this handset manager is only for chinese phones


Sorry, but I don't have infinity box and handset manager too. how can I have it. May I download it?
regards.

[zinoubinabil]

Sorry, but I don't have infinity box and handset manager too. how can I have it. May I download it?
regards.
hello dear
first you must have infinity box then we will support you



br;)
infinity box team

[REMO]

nokia 6300 dead pin out folder pinout here log...

COM1 [Serial0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 2 sec
Remove/Install battery now !
COM1 [Serial0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:0610:BAEC
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.17EABE5B.[TEMP26_05C_CARD_PCB01_GPRS_MT6226_S01.MAUI_05C_W06 _16_F2.BIN_4926F5CB].rpl
identification#1 detection finished
device-id: 17EABE5B
identification#1 protocol ver: 04
ver. sw1: TEMP26_05C_CARD_PCB01_GPRS_MT6226_S01.MAUI_05C_W06 _16_F2.BIN
ver. sw2: MAUI.05C.W06.16.F2
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
security area#1 calculation...
done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _17EABE5B_TEMP26_05C_CARD_PCB01_GPRS_MT6226_S01.MA UI_05C_W06_16_F2.BIN_4926F5CB_20080102-194938.B0X.bin
Area: Firmware
flash: 01227E22202200:29EA0000000000
Write: Firmware
Write Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _17EABE5B_TEMP26_05C_CARD_PCB01_GPRS_MT6226_S01.MA UI_05C_W06_16_F2.BIN_4926F5CB_20080102-200721.B0X.bin
Finished, time used: 1100 sec
Remove/Install battery now !



after flash fone live thanks infinity.

[Infinity-Box]

Sorry, but I don't have infinity box and handset manager too. how can I have it. May I download it?
regards.

You must buy infinity box to service not only chinese phones but 500 more different phones, from europe, india , asia ,
Buy your box and you will be making money the next minute

[reaz.com]

work with INFINITY and make a lot of $.................................

[sege]

dead phone still not perfect more dead more dead phone

[systemworm]

Repaired one Chinese 6500 which was restarting.Formatting didn't help so I flashed phone with
CM_Nokia-N6500_MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.MAUI_ 05C_W06_16_16m_En_Ru_Fr_Es_Th_Vn_Pt_Ar.B0M
Here is the log
COM4 [Serial2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
chip: 0031:58C6:C5CB
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.E188537E.[MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.MAUI_05C_W0 6_16.BIN_EA09F55F].rpl
identification#1 detection finished
device-id: E188537E
identification#1 protocol ver: 04
ver. sw1: MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.MAUI_05C_W0 6_16.BIN
ver. sw2: MAUI.05C.W06.16
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.


warning: optional information not found
detect device identification#2 finished
detecting languages...

language parameters detected
detected languages: En Ru Fr Es Th Vn Pt Ar
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
detect device identification#2...
detection phase #1...
.


warning: optional information not found
detect device identification#2 finished
security area#1 calculation...
done
file saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _E188537E_MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.M AUI_05C_W06_16.BIN_EA09F55F_20080111-224314.B0X.bin
Area: Firmware
flash: 01227E22202200:29EA0000000000
Write: Firmware
Write Done
file saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _E188537E_MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.M AUI_05C_W06_16.BIN_EA09F55F_20080111-225056.B0X.bin
Finished, time used: 523 sec
Remove/Install battery now !

[cellbhai]

Its a money making machine.Very fast reply,they r helping new users with smiling face,they r working round a clock.USers are very happy with INFINITY TEAM.VERY GOOD SUPPORT TEAM.

[alfox]

ok now heres my first success story for chinese miracle and hope more to come.thanks infinity plus for the support.more power....


heres a common scenario for china phones.problem hangs/turns off when inserted with simcard.this is a reference for us all....

first step disassemble the unit and look for the pinouts of the unit....in my case N95 dualsim not sliding china phone...

http://img221.imageshack.us/img221/7228/dsc00097ih4.jpg

then connect the phone and now read full flash for back up purposes

LOGS

COM60 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:D5F3:82FA
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 Ok
security area backup saved:

id.88D480C6.[E553_B2ARAB_E553_GPRS_MT6226_S01.01_1.BIN_4A49BC24].rpl
New firmware detected:
E553_B2ARAB_E553_GPRS_MT6226_S01.01_1.BIN

- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: alfox
identification#1 protocol ver: 04
ver. sw1: E553_B2ARAB_E553_GPRS_MT6226_S01.01_1.BIN
ver. sw2: E553_B2ARAB.01.1
ffs offset/size: 00800000/001FF000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00800000
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
Detected eeprom/ffs address is non-standard: 00E00000

Posible reasons:
1. eeprom is Ok but address is non-standard
2. eeprom damaged and can't be detected
3. eeprom is Ok but detected incorrectly (f.e. unknown eeprom structure)

If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make flash backup for emergency case
3. repeat required operation

Are you sure that detected eeprom address is correct ?
autodetected eeprom/ffs address[00E00000] confirmed by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
reading [flash[E553_B2ARAB_E553_GPRS_MT6226_S01.01_1.BIN]]...
file saved: C:\Program

Files\InfinityBox\ChineseMiracle\backup_flashN95du alGood[E553_B2ARAB_E553_GP

RS_MT6226_S01.01_1.BIN]_20080110-122857.B0M.bin
file saved:

backup_system_log_88D480C6_E553_B2ARAB_E553_GPRS_M T6226_S01.01_1.BIN_4A49BC2

4_20080110-122919.B0X.bin
Finished, time used: 630 sec
Remove/Install battery now !

then after back up now format the phone

LOGS

COM60 [VCP0] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A02:8A01]...
chip: 0031:D5F3:82FA
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: E553_B2ARAB.01.1_26S01
Version: M500Z_05C_HW
detecting structure #2...
done
imei: 35543501019827
connection Ok
building list...
done
items to clear: 194
172 of 194 items cleared
building list...
done
4 items remains
Finished, time used: 137 sec
Remove/Install battery now !

then after formatting write the original imei

LOGS

Action: imei
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: M500Z_05C_HW
Software version: E553_B2ARAB.01.1_26S
Software date: 2005.04.12
Barcode: MT012345678901234567
imei: 135790246811220
imei write method: mode-1
new imei: 355435010198272
imei verified Ok
Finished, time used: 52 sec
Power off phone now !

then change the language to english and now the phone is alright

http://img139.imageshack.us/img139/7306/dsc00099cn6.jpg

[Edwins c]

[QUOTE=andi_gsm2002;2936626]COM11 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22212200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22212200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detecting eeprom area in 1 chip(s)...
flash: 01227E22212200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000

Write Done

which pinout for N72
i need the pinout ON72 small 18 pin

[cellbhai]

N 98 I Restart complaint.2*5 pin.I use N77i pin ou connection and formate set.see log.

==== log opened: [2/1/2008 8:15:51 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v2.24
S/N: 08A6***xx
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: BR26_05C_HW
Software version: AIDEHE_SSD1289_OV767
Software date: 2005.04.12
Barcode: MT012345678901234567
imei: 354442573045100
Finished, time used: 9 sec
Power off phone now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !

Do you want to continue ?
COM4 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
chip: 0031:0041:99C0
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
slowest
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.25F2DB6B.[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_35_25.BIN_D4D9 0094].rpl
New firmware detected:
BR26_05C_PCB01_GPRS_MT6226_S01.BR26_35_25.BIN

- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 25F2DB6B
identification#1 protocol ver: 04
ver. sw1: BR26_05C_PCB01_GPRS_MT6226_S01.BR26_35_25.BIN
ver. sw2: BR26_35.25, 6BFF262B
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
reading [eeprom[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_35_25.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_35_25.BIN]_20080201-203719.B0E.bin
flash: 01227E22202200:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 01227E22202200:29EA0000000000
Write Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _25F2DB6B_BR26_05C_PCB01_GPRS_MT6226_S01.BR26_35_2 5.BIN_D4D90094_20080201-203749.B0X.bin
Finished, time used: 1248 sec
Remove/Install battery now !

[GsmXplorer]

Hey thanx for CM infinity
successfully flash CECT V180
RGDS

[shripalkawdia]

Hey thanx for CM infinity
successfully flash CECT V180
RGDS

which flash file u select
can u explain more

[GsmXplorer]

Successfully Format China N95 with new Picture help from Infinity Team
Thanks
B.Regards

[alfox]

heres another common scenario for china phones.auto shut off when inserted with sim....
Heres the pinout:
http://i120.photobucket.com/albums/o199/alfox78/DSC00122.jpg
Heres the actual Phone:
http://i120.photobucket.com/albums/o199/alfox78/DSC00123.jpg
back up process:
COM4 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
chip: 0031:D304:0069
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.BFACEFF6.[E558_ND2_E558_GPRS_MT6226_S01.01_1.BIN_722D94F9].rpl
New firmware detected:
E558_ND2_E558_GPRS_MT6226_S01.01_1.BIN
- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: BFACEFF6
identification#1 protocol ver: 04
ver. sw1: E558_ND2_E558_GPRS_MT6226_S01.01_1.BIN
ver. sw2: E558_ND2.01.1, 066BD28D
ffs offset/size: 00800000/001FF000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00800000
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
Detected eeprom/ffs address is non-standard: 00E00000
Posible reasons:
1. eeprom is Ok but address is non-standard
2. eeprom damaged and can't be detected
3. eeprom is Ok but detected incorrectly (f.e. unknown eeprom structure)
If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make flash backup for emergency case
3. repeat required operation
Are you sure that detected eeprom address is correct ?
autodetected eeprom/ffs address[00E00000] confirmed by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
reading [flash[E558_ND2_E558_GPRS_MT6226_S01.01_1.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_flash[E558_ND2_E558_GPRS_MT6226_S01.01_1.BIN]_N6128autoOff20080206-145953.B0M.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _BFACEFF6_E558_ND2_E558_GPRS_MT6226_S01.01_1.BIN_7 22D94F9_20080206-150019.B0X.bin
Finished, time used: 656 sec
Remove/Install battery now !
Format Process:
COM4 [VCP0] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A02:8A01]...
CPU: MT6226
chip: 0031:D304:0069
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: E558_ND2.01.1_26S01
Version: M500Z_05C_HW
detecting structure #2...
done
60 byte(s) read
imei: 35456500271691
connection Ok
building list...
done
items to clear: 210
warning: wrong packet cs
warning: wrong packet cs
208 of 210 items cleared
building list...
done
2 items remains
Finished, time used: 47 sec
Remove/Install battery now !
Restore imei:
Action: imei
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: M500Z_05C_HW
Software version: E558_ND2.01.1_26S01"
Software date: 2005.04.12
Barcode: MT012345678901234567
imei: 135790246811220
imei write method: mode-1
new imei: 354565002716912
imei verified Ok
Finished, time used: 30 sec
Power off phone now !

[alfox]

heres my bwena mano for today.another china phone.i guess it really is chinese new year.kung hei fat choi

pinout here:

http://i120.photobucket.com/albums/o199/alfox78/DSC00117.jpg

logs here:

back up process:

COM4 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
chip: 0031:C9BC:429A
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program

Files\InfinityBox\ChineseMiracle\backup_security\i d.6A2C4497.[T6226_05C_PCB0

1_GPRS_MT6226_S01.A7_NOKIA_ALLLANG_V0627A.BIN_F52B 6C0A].rpl
identification#1 detection finished
device-id: 6A2C4497
identification#1 protocol ver: 04
ver. sw1: T6226_05C_PCB01_GPRS_MT6226_S01.A7_NOKIA_ALLLANG_V 0627A.BIN
ver. sw2: A7_NOKIA_ALLLANG_V0627A, F593D40A
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
reading

[flash[T6226_05C_PCB01_GPRS_MT6226_S01.A7_NOKIA_ALLLANG_V 0627A.BIN]]...
file saved: C:\Program

Files\InfinityBox\ChineseMiracle\backup_flash[T6226_05C_PCB01_GPRS_MT6226_S0

1.A7_NOKIA_ALLLANG_V0627A.BIN]_6300autoOff20080207-094139.B0M.bin
file saved: C:\Program

Files\InfinityBox\ChineseMiracle\backup_system_log _6A2C4497_T6226_05C_PCB01_

GPRS_MT6226_S01.A7_NOKIA_ALLLANG_V0627A.BIN_F52B6C 0A_20080207-094231.B0X.bin
Finished, time used: 606 sec
Remove/Install battery now !

format process:

COM4 [VCP0] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A02:8A01]...
CPU: MT6226
chip: 0031:C9BC:429A
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: A7_NOKIA_ALLLANG_V0627A
Version:
detecting structure #2...
done
60 byte(s) read
imei: 35619801240211
connection Ok
building list...
done
items to clear: 199
157 of 199 items cleared
0 items remains
Finished, time used: 225 sec
Remove/Install battery now !

restore imei:

Action: imei
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Software version: A7_NOKIA_ALLLANG_V06
Software date: 2005.04.12
Barcode: MT012345678901234567
imei: 135790246811220
imei write method: mode-1
new imei: 356198012402113
imei verified Ok
Finished, time used: 31 sec
Power off phone now !

after all the process phone is now working well

http://i120.photobucket.com/albums/o199/alfox78/DSC00118.jpg

[fethi]

Dear Customers,

As we all have experienced the miracle our chinese miracle software can produce to service Chinese Made Phones we would like to you to post your success storys here

Some Guideline

1) Not more than 4 lines
2) How you were benfited by Infinity Box Chinese miracle software
3) How our support has been this is your comment for our future customers

i used 2 deferent boxes for chines phone, they not good Enough like infinity and i never fail to repair any chines phone with infinity (may be i am lucky) and the support is open source to me, i can help to add new FW,new phones,.... and the most important they are very helpfull pll

[jbbasha]

hai to all mem

thanks to infinity team for good s/w.

i need help china phone is dead, flashing ok but set is nort switching on

i have flashed n95 slide,ztc a898 pls pls can any one give the working solution

thx in adv

[nasermmx]

lovely good very good box

[GsmXplorer]

NCKIA -5700+ successfully repaired restart with SIM
Thanks Infinity team
Regards
-------------------

COM4 [VCP0] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:EB76:1520
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: E558_MY1AF.01.2_26S01
Version: M500Z_05C_HW
detecting structure #2...
done
60 byte(s) read
imei: 35869300008514
connection Ok
building list...
done
items to clear: 212
warning: wrong packet cs
warning: wrong packet cs
209 of 212 items cleared
building list...
done
3 items remains
Finished, time used: 57 sec
Remove/Install battery now !

[alimuamin]

Yes The Infinity Box Is A Realy A ' Miracle ' , We Clear Many Phones With Infi. And One Think Before 2 Months We Have Get A 7 Peace Chinece Phone From A Second Sailer One Of Them Is Working But Call Not Allowed ,we Try To Format That One And Is Ok . And Copy That Flash And Try To Write Other Dead Phones, All Phones Is Okay. Costomer Is Afraid ,because People Said That Money Is Dead . We Told The Costomer .one Miracle Is Happened On Software Service Section Of Mobile Phones Called ------infinity!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (sorry For Exit Out Of 4line)

[GsmXplorer]

A6-Successfully Repaired from Dead Condition
really Great work Infinity team
Thank You Very Much
Regards

[Ravvi]

Very good & useful.....all thing is that infinity is headtaker of among all boxes thats all.

[joni_rajpura]

ztc zt188 restart solved

here is pinout from pinfinder

software version: 1.06
cable type: 1x8 (L8A)
platform: MT6205, MT6217-MT6228
searching adapter at COM7...
adapter found, version: 2000
pins: 8, plain
power cycles: 1
activation cycles: 7
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
19200
CPU: MT6225
result: Rx:3 Tx:4
time required: 10 sec
Power On !



COM7 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:E103:000D
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.4F1E8253.[MT6225_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_08_M P_V27.BIN_491ED62D].rpl
identification#1 detection finished
device-id: 4F1E8253
identification#1 protocol ver: 04
ver. sw1: MT6225_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_08_M P_V27.BIN
ver. sw2: MAUI.06B.W07.08.MP.V27, D229E1B6
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[MT6225_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_08_M P_V27.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[MT6225_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_08_M P_V27.BIN]_20080330-110944.B0E.bin
flash: 01227E22202200:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 01227E22202200:18E59F00000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _4F1E8253_MT6225_06B_PCB01_GPRS_MT6225_S00.MAUI_06 B_W07_08_MP_V27.BIN_491ED62D_20080330-111013.B0X.bin
Finished, time used: 268 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[pastorsam]

Ifinity Box... You Are Great

I Flashed Many China Phones & Ok

[yalamandareddy]

i like infinity please give other processor support in infinity

[f164]

success with my first n95 Chinese slider good work infinity team repaired successfully after hanging with sim thank you

[hicvb7]

Repaired also today 2 Nokia N95 RM 159 with INFINITY bijou ;)

Br Hichem

[akhil_bbsr]

no dout in my mind is that...infinity is best

[gsm-world]

now chinese phone are much more
and its software is very easy
gooddddddddddd

[ezysuresh]

Limited Investment Infinity Profits :)$$$

[mentari]

Yes,, Sucessfully repair a MTK6228 NAND, model PS3 ,problem: phone shutdown if opening progress show 100%.

Read Full Flash,
Download Same firmware on Support Area,
Flash it. problem solved

Thanks

[rashel.com]

good update .

keep it up.

[rashel.com]

thx infinity team

keep the great work

[godai]

Yes,, Sucessfully repair a MTK6228 NAND, model PS3 ,problem: phone shutdown if opening progress show 100%.

Read Full Flash,
Download Same firmware on Support Area,
Flash it. problem solved

Thanks

I have this phone... which is the exactly firmware you download from support area?

thanks

[godai]

Yes,, Sucessfully repair a MTK6228 NAND, model PS3 ,problem: phone shutdown if opening progress show 100%.

Read Full Flash,
Download Same firmware on Support Area,
Flash it. problem solved

Thanks


And one more question... Do the options like SNES, GBC and NES emulator work after the flash? Do you have the same options in menu?

Regards

[kumar_pvj]

hantel HT6088 pinout need

[RaSkAl01]

Infinity BOX is one of the Best Boxes ever produced

[gsmxpert]

really reaaly done great infinity team.....

[Ravvi]

Chinese ZTC ZT989 dead solve by format on infinity

Here is log of format......

COM14 [VCP0] selected
Device: Spice S410
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6205:8B00]...
CPU: MT6205
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: STANDARD_PCB01_GSM_MT6205B_DN.KACS410_INA_EN_HI_4_ 02_330.BIN
ver. sw2: KACS410_INA_EN_HI_4.02_330, 00000000
ffs offset/size: 00380000/00080000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[STANDARD_PCB01_GSM_MT6205B_DN.KACS410_INA_EN_HI_4_ 02_330.BIN]]...
file saved: C:\Program Files\InfinityBox\MModule\backup_eeprom[STANDARD_PCB01_GSM_MT6205B_DN.KACS410_INA_EN_HI_4_ 02_330.BIN]_20080501-191727.B0E.bin
flash: 01227E221A2201:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 01227E221A2201:18E59F00000000
Finalization Done
Finished, time used: 75 sec
Remove/Install battery now !

[Ravvi]

Here is pinout of ZTC ZT989 check link mates....

http://www.gsmhosting.com/vbb/showthread.php?t=532810

[azi_kewl]

But i can't understand ...i still never get connected properly though i always follow the pin outs instructions.cbale tx,cable rx,and cable gnd....what else should i do please....:

[nikunj]

CECT_T689 COMPLATE AFTER FORMATE

[Infinity Box] v2.45
S/N: ###
Wait...
Device: Autodetect 6205-6227 NOR
Done
COM3 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:1B8B:E32F
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.FB5A677A.[E550_A5ARABBT_E550_GPRS_MT6226_S01.E550_A5ARAB_01_ 0.BIN_CA0A8660].rpl
identification#1 detection finished
device-id: FB5A677A
identification#1 protocol ver: 04
ver. sw1: E550_A5ARABBT_E550_GPRS_MT6226_S01.E550_A5ARAB_01_ 0.BIN
ver. sw2: E550_A5ARAB.01.0, 9F79F535
ffs offset/size: 00800000/001FF000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00800000
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
Detected eeprom/ffs address is non-standard: 00E00000
Posible reasons:
1. eeprom is Ok but address is non-standard
2. eeprom damaged and can't be detected
3. eeprom is Ok but detected incorrectly (f.e. unknown eeprom structure)
If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make flash backup for emergency case
3. repeat required operation
Are you sure that detected eeprom address is correct ?
autodetected eeprom/ffs address[00E00000] confirmed by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [flash[E550_A5ARABBT_E550_GPRS_MT6226_S01.E550_A5ARAB_01_ 0.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_flash[E550_A5ARABBT_E550_GPRS_MT6226_S01.E550_A5ARAB_01_ 0.BIN]_20080526-161902.B0M.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _FB5A677A_E550_A5ARABBT_E550_GPRS_MT6226_S01.E550_ A5ARAB_01_0.BIN_CA0A8660_20080526-161950.B0X.bin
Finished, time used: 1907 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !
Do you want to continue ?
COM3 [VCP0] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:1B8B:E32F
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: E550_A5ARAB.01.0_26S01
Version: M500Z_05C_HW
detecting structure #2...
done
60 byte(s) read
imei: 35410100024132
connection Ok
building list...
done
items to clear: 210
190 of 210 items cleared
building list...
done
2 items remains
Finished, time used: 128 sec
Remove/Install battery now !

[mrfixit]

flying f826 pinout via pinfinder:

software version: 1.09
cable type: 2x6 (L12B)
platform: MT62xx (autodetect)
searching adapter at COM3...
adapter found, version: 2000
pins: 12, plain
power cycles: 1
activation cycles: 7
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
19200 fixed
CPU: MT6226
result: Rx:7 Tx:6
time required: 34 sec
Power On !
saved: Flying_F826

chinese miracle v2.45 unlock phone code successfully, tnx infinity

[yasminato]

i fixed many chinese phone probs with infinity box.we wait more updates
thx so much for help and support

[mcclinic]

today come nokla n95 mtk6226 prob show on display pen calibration.at first start infinity select nokla n95 run detect mtk chiness miracle 2.46 ver select comport calibrate touch screen repair security area cable use super doctor cgc cable i use two box super doctor and infinity for this success .thanks infinity team for add touch screen pen cali erase solution

[yasminato]

go on infinity team
best regards

[InfinitySupport]

But i can't understand ...i still never get connected properly though i always follow the pin outs instructions.cbale tx,cable rx,and cable gnd....what else should i do please....:


If phone can not be detected by software you must double check your cable (probably need to swap Rx <-> Tx) and check COM port selection.

[jawal]

i am new user with china mobil i solved some piece with the help of infinity soft thak you and good work

[lasertalk_prem]

with infinity works fine i have readead flash from aprox 60 models which r running models

[saifali]

infinity is the best for all chinese and many others phones i have solved 98% sets with infinity we need update it from other devices plz include many new features in infinity

[mov009]

I AM FORMAT SONY COLON & success by INFINITY BOX
HEAR IS LOG:-COM6 [VCP0] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:497D:5200
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: BB04.6.36.1.0T05_20071017_Yan
Version: BB04MBV02
detecting structure #2...
done
60 byte(s) read
imei: 35440500467085
connection Ok
building list...
done
items to clear: 202
warning: wrong packet cs
warning: wrong packet cs
201 of 202 items cleared
building list...
done
1 items remains
Finished, time used: 36 sec
Remove/Install battery now !


sony colon pinout:-rx-8,tx-7

[cutejem]

Sir, I am including the (link) that contains picture of my phone here for your reference.
http://www.sulit.com.ph/index.php/view+classifieds/id/358396/Apple+iPhone+Clone+w/+Fingerprint+Scanner+PDA+Phone+Dual+Sim+Tchscrn+-+1yr+WRTY

My phone stopped working. The technician at the repair shop wants to have the flash s/w and other related s/w for this phone. Please send it to my email ( cutejem@rediffmail.com ) Thanks in advance.

[nasermmx]

sir i purches pinfinder but not detecting any phone/ i attach infinityslim box suporting pinfinder our not plz help me

[mov009]

sir i purches pinfinder but not detecting any phone/ i attach infinityslim box suporting pinfinder our not plz help me
plese read this carefully-C:\Program Files\InfinityBox\Documentation ,I HOPE YOU WILL GAT ANS.

[lasertalk_prem]

i am using infinity i am going to say only one thing that it is great

[ezzis]

cect V180 "restart with sim" repaired success in 5 mins.
Equipment used:Pin-finder adapter-found pinout stored in softwares internal database
Infinity-box slim plus and Chinese miracle v2.54
action:format ffs:safe
COM4 [VCP2] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:1B4B:D24C
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: E553_KT3F8C.01.1_26S01
Version: M500Z_05C_HW
detecting structure #2...
done
60 byte(s) read
imei: 326******xx645
connection Ok
building list...
done
items to clear: 203
183 of 203 items cleared
building list...
done
1 items remains
Finished, time used: 142 sec
Remove/Install battery now !

[amralkareem]

Infinity BOX is one of the Best Boxes ever produced .

I repair more than 1500 phones with only Chinese Miracle

[Vansy]

Today I'm happ with my infinity box!
with 6300 new type almost same original. after read flash i see file name the same with one file on support area.
I download and flash to phone insert sim restart, phone work but always vibateing none stop.unhope but i have read flash sent to support,
one week , 2 weeks never see my file one support. just today my friend bring 10pcs this phone to me for repair, I tried to reserch and the
last one I see my file upload to support. very nice now after flash all 10pcs phone working normal.Big thanks to infinity team.
.

COM1 [Serial2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:3103:000E
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.2DDD4635.[JIA6300_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_52_MP_V 2.BIN_34943509].rpl
identification#1 detection finished
device-id: 2DDD4635
identification#1 protocol ver: 04
ver. sw1: JIA6300_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_52_MP_V 2.BIN
ver. sw2: MAUI.07A.W07.52.MP.V2, F6CA6BCB
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading: eeprom[JIA6300_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_52_MP_V 2.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[JIA6300_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_52_MP_V 2.BIN]_20080903-040737.B0E.bin
flash: 01227E22202200:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
security area#1 calculation...
done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\system_log_2DDD46 35_JIA6300_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_52_M P_V2.BIN_34943509_20080903-040752.B0X.bin
Area: Firmware
flash: 01227E22202200:18E59F00000000
Write: Firmware
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization...
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\system_log_2DDD46 35_JIA6300_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_52_M P_V2.BIN_34943509_20080903-040932.B0X.bin
Finished, time used: 338 sec
Remove/Install battery now !

[amerigo290]

hey thanx for cm infinity
successfully flash cect v180
rgds

pls help me after formating ffs complete the phone is diedits is cect v180 can you guide me how to do?or which flash is means with this model at infinity support?urgentthanx in advance

[ghost__]

infinity is always best for me its amazing and best tool for chinese miracel

[joni_rajpura]

pinfinder logs

software version: 1.16
cable type: 1x18 (L18B)
platform: MT: MT62xx (autodetect)
searching adapter at COM5...
adapter found, version: 2000
pins: 18, plain
power cycles: 1
activation cycles: 7
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
19200 fixed
CPU: MT6226
result: Rx:7 Tx:6
time required: 59 sec
Power On !


formating logs

Wait...
Device: Autodetect 6205-6227 NOR
Done
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !

Do you want to continue ?

==== log: [11/25/2008 6:43:29 PM] ====
COM5 [VCP0] selected
module v2.69
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:868A:3235
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: YD220_BT.C052.6226.L03457B.F08.D41.C1.U1.V1.02
Version: YW26_05C_HW
detecting structure #2...
done
60 byte(s) read
imei: 35307900905833
connection Ok
building list...
done
items to clear: 175
warning: wrong packet cs
warning: wrong packet cs
175 of 175 items cleared
building list...
done
0 items remains
Finished, time used: 29 sec
Remove/Install battery now !:D:D:D:D:D

[fastlink Jogja]

No boxes repair chinese mobile phone like infinity box. i can say infinity is the best among many boxes out there. bravo to infinity team.. keep to be number one.

fastlink

[mohammed ako]

I have been successful using infinity box for all operation except that we face problems with cables and also flashing and unlocking spd based chips

[mbiborna]

nktel a200 kotkotel done with infinity

COM5 [VCP0] selected
module v2.84
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:0E03:0007
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 89881200010001:89881200000000
flash: Intel Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 89881200010001:89881200000000
flash: Intel Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #02 in region #00...
flash: 89881200010001:89881200000000
flash: Intel Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #03 in region #00...
flash: 89881200010001:89881200000000
flash: Intel Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 89881200010001:89881200000000
flash: Intel Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 89881200010001:89881200000000
flash: Intel Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
====================
New firmware detected (v.2.84, database date: 28.06.09
):
KCM25_GEMINI_PCB01_GPRS_MT6225_S00.E71M_V1.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: KCM25_GEMINI_PCB01_GPRS_MT6225_S00.E71M_V1.BIN
ver. sw 2: E71M_V1, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 89881200010001:89881200000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: KCM25_GEMINI_PCB01_GPRS_MT6225_S00.E71M_V1__ffs...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\KCM25_GEMINI_PCB0 1_GPRS_MT6225_S00.E71M_V1__ffs_20090708-162621.B0E.bin
flash: 89881200010001:89881200000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 89881200010001:89881200000000
Finalization Done
Finished, time used: 270 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[mobile_hotman]

NOKIA_HANTEL_M2210

Problem = restart with sim inside

Solution = complete format

LOGS

COM28 [VCP0] selected
module v2.84
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:F1E0:2061
status: FF
high speed boot Off
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #02 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #03 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
921600
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: CT6253_PCB01_GPRS_MT6226_S01.CT6253_V1_7.BIN
ver. sw 2: CT6253_V1.7, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: EC257E25082501:29EA0000000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: CT6253_PCB01_GPRS_MT6226_S01.CT6253_V1_7__ffs...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\CT6253_PCB01_GPRS _MT6226_S01.CT6253_V1_7__ffs_20090719-134503.B0E.bin
flash: EC257E25082501:29EA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: EC257E25082501:29EA0000000000
Finalization Done
Finished, time used: 210 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !


BR

[mbiborna]

nktel kotkotel

COM6 [VCP0] selected
module v2.86
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:EB03:0008
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 89881500010001:89881500000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 89881500010001:89881500000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
detecting chip #02 in region #00...
flash: 89881500010001:89881500000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
detecting chip #03 in region #00...
flash: 89881500010001:89881500000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 89881500010001:89881500000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 89881500010001:89881500000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
====================
New firmware detected (v.2.86, database date: 26.07.2009):
KCM25_GEMINI_PCB01_GPRS_MT6225_S00.E71M_V1.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: KCM25_GEMINI_PCB01_GPRS_MT6225_S00.E71M_V1.BIN
ver. sw 2: E71M_V1, 00000000
ffs offset/size: 00E00000/00200000
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 89881500010001:89881500000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: KCM25_GEMINI_PCB01_GPRS_MT6225_S00.E71M_V1__ffs...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\KCM25_GEMINI_PCB0 1_GPRS_MT6225_S00.E71M_V1__ffs_20090806-215614.B0E.bin
flash: 89881500010001:89881500000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 89881500010001:89881500000000
error: wrong answer: 72
error: flash erase error: 00E00000
error: no any expected answer
error: erase #E2
Finalization Fail
Finished, time used: 246 sec
Remove/Install battery now !

[Shakeel_pattoki]

==== log: [8/4/2009 2:16:48 PM] ====
COM20 [VCP0] selected
module v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot Off
chip: 0001:F503:000D
status: FF
high speed boot Off
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 89881200010001:89881200000000
flash: Intel Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 89881200010001:89881200000000
flash: Intel Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #02 in region #00...
flash: 89881200010001:89881200000000
flash: Intel Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #03 in region #00...
flash: 89881200010001:89881200000000
flash: Intel Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 89881200010001:89881200000000
flash: Intel Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 89881200010001:89881200000000
flash: Intel Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
====================
New firmware detected (v.2.82, database date: 15.05.2009):
MT6225_GEMINI_PCB01_GPRS_MT6225_S00.SYGJ_6300_1_1_ 3_2.BIN
This firmware is missing in support area. If this phone is good and working:
- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: MT6225_GEMINI_PCB01_GPRS_MT6225_S00.SYGJ_6300_1_1_ 3_2.BIN
ver. sw 2: SYGJ.6300.1.1.3.2, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 89881200010001:89881200000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: MT6225_GEMINI_PCB01_GPRS_MT6225_S00.SYGJ_6300_1_1_ 3_2__ffs...
file saved: G:\(2) Ufs Flasher files\Infinity Box\Backup\ChineseMiracle\MT6225_GEMINI_PCB01_GPRS _MT6225_S00.SYGJ_6300_1_1_3_2__ffs_20090804-142130.B0E.bin
flash: 89881200010001:89881200000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 89881200010001:89881200000000
Finalization Done
Finished, time used: 345 sec
Remove/Install battery now !

[mobile_hotman]

NEW TOUCH SCREEN PROCEDURE GR8 UPDATE,,,

THANX MY GR8 & LOVELY INFINITY_BOX SUCCEEDED IN NEW & CHANGED TOUCH SCREEN CALIBRATION PROCEDURE,,,NOW MY CHINA SET 1000000% OK,,,I LOVE INFINITY TEAM WITH ITS GR8 SUPPORT,,

LOGS

COM28 [VCP1] selected
module v2.87
Action: touchscreen calibration
How to calibrate touchscreen:
- for this operation you need to have full flash backup from phone
- if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
- if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure

Do you have full flash backup ?
Loading file v.02...
QVGA_PCB01_GPRS_MT6226_S01.SC_7787_129JBO_CSTAR_EN _FRE_THAI_VIE_RU_V1_3_26B_20071228__fullflash_2009 0807-122341.B0M.bin loaded
detected record size adjusted
detected record size adjusted
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:24C1:9B0A
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: SC_7787_129JBO_CSTAR_EN_FRE_THAI_VIE_RU_V1.3_26B_2 0071228
Version: KP26_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 35790246811225
connection Ok
158 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Finished, time used: 12 sec
Remove/Install battery now !

BR

[zeel_zeel]

Touch screen calibration bypass with new method succesfull....


COM1 [VCP1] selected
module v2.89
Action: touchscreen calibration
How to calibrate touchscreen:
- for this operation you need to have full flash backup from phone
- if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
- if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure

Do you have full flash backup ?
Loading file v.02...
MTK25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_12_59 __fullflash_20090817-121624.B0M.bin loaded
detected record size adjusted
detected record size adjusted
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:9203:000D
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: MAUI.06B.W07.12.59
Version: MTK25_06B_HW
44 byte(s) read
imei: 35044801123456
connection Ok
160 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Finished, time used: 10 sec
Remove/Install battery now !

[zeel_zeel]

Another touch screen calibration bypass with new method done with ease ....

COM79 [VCP0] selected
module v2.89
Action: touchscreen calibration
How to calibrate touchscreen:
- for this operation you need to have full flash backup from phone
- if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
- if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure

Do you have full flash backup ?
Loading file v.02...
N81_ABROAD_PCB01_GPRS_MT6225_S00.N81_ABROAD_S5LCD_ V1_1_8__fullflash_20090812-123318.B0M.bin loaded
detected record size adjusted
detected record size adjusted
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:FF03:0004
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: N81_ABROAD_S5LCD_V1.1.8
Version: M500_P3
67 byte(s) read
imei: 35044801123456
connection Ok
211 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Finished, time used: 10 sec
Remove/Install battery now !

[mbiborna]

COM6 [VCP0] selected
module v2.91
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:B802:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:2BEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 98000300000001:2BEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #02 in region #00...
flash: 98000300000001:2BEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #03 in region #00...
flash: 98000300000001:2BEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 98000300000001:2BEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 98000300000001:2BEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
it's time to stop: 2B0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [enhanced] generation
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.E7CF5FB0.[NK6223_ABROAD_PCB01_GPRS_MT6223P_S00.L700+_EN_CDGB _MOON_BYD_V2_1_0.BIN_EA6CFC40].rpl
====================
New firmware detected (v.2.91, database date: unknown):
NK6223_ABROAD_PCB01_GPRS_MT6223P_S00.L700+_EN_CDGB _MOON_BYD_V2_1_0.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
device-id: E7CF5FB0
rom info protocol ver: 05
ver. sw 1: NK6223_ABROAD_PCB01_GPRS_MT6223P_S00.L700+_EN_CDGB _MOON_BYD_V2_1_0.BIN
ver. sw 2: L700+_EN_CDGB_MOON_BYD_V2.1.0, BF039315
ffs offset/size: 00E00000/00200000
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 98000300000001:2BEA0000000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detect device sec info...
detection phase #1...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: NK6223_ABROAD_PCB01_GPRS_MT6223P_S00.L700+_EN_CDGB _MOON_BYD_V2_1_0__ffs...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\NK6223_ABROAD_PCB 01_GPRS_MT6223P_S00.L700+_EN_CDGB_MOON_BYD_V2_1_0_ _ffs_20090903-123122.B0E.bin
flash: 98000300000001:2BEA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
ffs formatting...
flash: 98000300000001:2BEA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\N K6223_ABROAD_PCB01_GPRS_MT6223P_S00.L700+_EN_CDGB_ MOON_BYD_V2_1_0__system_log_E7CF5FB0_EA6CFC40_2009 0903-123145.B0X.bin
Finished, time used: 293 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[Shakeel_pattoki]

COM22 [Serial2] selected
module v2.82
Action: touchscreen calibration
mode: 1
Calibration order: reverse
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:C891:4A3D
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: S889_RSDL_K5_ILI9320_L7_00_06
Version: S889_01
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-1)...
done
163 byte(s) read
writing data...
verification...
verification Ok
Power-On and test phone now
If calibration is not completed yet:
1. make "Reverse calibration order" UN-checked and try again
2. try another calibration mode
Finished, time used: 20 sec
Remove/Install battery now !

[Shakeel_pattoki]

==== log: [9/3/2009 5:35:17 PM] ====
COM22 [Serial2] selected
module v2.82
Action: touchscreen calibration
mode: 2
Calibration order: reverse
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:6B03:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: TM608C_TZ_SP_Viem_V4.6.0
Version: HW_2.0
detecting structure #2...
0 6 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-2)...
9 8 7 6 done
160 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Power-On and test phone now
If calibration is not completed yet:
1. make "Reverse calibration order" UN-checked and try again
2. try another calibration mode
Finished, time used: 13 sec
Remove/Install battery now !

[Shakeel_pattoki]

==== log: [8/30/2009 12:11:17 PM] ====
COM23 [VCP0] selected
module v2.89
Action: read codes
unlock method: read codes
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:9903:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E05
Date: 2006.06.14
Version: 1.0
Version: T600_V04_ENFRARRUSPPEVN_SIGMATEL
Version: T600_GEMINI_HW
detecting structure #2...
5 11 done
67 byte(s) read
imei: 35788800321748
connection Ok
detecting structure #1...
1 5 6 8 9 10 12 13 14 done
178 byte(s) read
Phone lock: On
Network lock: Off
Network subset lock: Off
Service provider lock: Off
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
Phone code: 1256
Finished, time used: 16 sec
Remove/Install battery now !

[zeerik]

Suny Ericssun (china like sonyericsson w800) dead repair

COM5 [VCP0] selected
module v2.91
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6219:8A01]...
CPU: MT6219
high speed boot On
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #02 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #03 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
921600
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device rom info...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. .................................................. .................................................. .................................................. ......
warning: rom info information not found, possible reasons:
.old firmware type w/o rom info data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device rom info finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset assigned: 00E00000
flash: 01227E22202200:29EA0000000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detect device sec info...
detection phase #1...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: _ffs...
file saved: E:\InfinityBox\ChineseMiracle\_ffs_20090906-215249.B0E.bin
flash: 01227E22202200:29EA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
ffs formatting...
flash: 01227E22202200:29EA0000000000
Finalization Done
Finished, time used: 187 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[Shakeel_pattoki]

COM23 [VCP0] selected
module v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:0303:000F
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #02 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #03 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: A25_B_V2_L5_PCB01_GPRS_MT6225_S00.GEMINI_1_0.BIN
ver. sw 2: A25_B_V2_L5.GEMINI.1.0, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: A25_B_V2_L5_PCB01_GPRS_MT6225_S00.GEMINI_1_0__ffs. ..
warning: wrong cs at 0x00E04000, retry...
read error recovered
file saved: G:\(2) Ufs Flasher files\Infinity Box\Backup\ChineseMiracle\A25_B_V2_L5_PCB01_GPRS_M T6225_S00.GEMINI_1_0__ffs_20090906-114912.B0E.bin
flash: EC257E25082501:18E59F00000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: EC257E25082501:18E59F00000000
Finalization Done
Finished, time used: 345 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[mohammed ako]

infinity team is trying very well on mtk based china but the team should pls add spd based phones to make it the best among it kinds

[mbiborna]

COM6 [VCP0] selected
module v2.89
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7E03:0005
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #02 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #03 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [standard] generation
====================
New firmware detected (v.2.89, database date: 10.08.2009):
K770_ABROAD_PCB01_GPRS_MT6225_S00.K770_ABROAD_V1_0 _4.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
rom info protocol ver: 04
ver. sw 1: K770_ABROAD_PCB01_GPRS_MT6225_S00.K770_ABROAD_V1_0 _4.BIN
ver. sw 2: K770_ABROAD_V1.0.4, 00000000
ffs offset/size: 00E00000/00200000
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 98004900000002:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detect device sec info...
detection phase #1...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: K770_ABROAD_PCB01_GPRS_MT6225_S00.K770_ABROAD_V1_0 _4__ffs...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\K770_ABROAD_PCB01 _GPRS_MT6225_S00.K770_ABROAD_V1_0_4__ffs_20090915-042614.B0E.bin
flash: 98004900000002:18E59F00000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 98004900000002:18E59F00000000
Finalization Done
Finished, time used: 252 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[Riteshgpt60]

I repair more than 3000 phones only on chinese miracle.

[Shakeel_pattoki]

COM22 [Serial2] selected
module v2.82
Action: touchscreen calibration
mode: 2
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:3C03:000F
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: BB13_BLE_L7EN_204_080313_HRILI9320_SIV0_TO75_CTF_B T_FM
Version: BET25_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-2)...
done
160 byte(s) read
writing data...
verification...
verification Ok
Power-On and test phone now
If calibration is not completed yet:
1. make "Reverse calibration order" Checked and try again
2. try another calibration mode
Finished, time used: 16 sec
Remove/Install battery now !

[mbiborna]

COM6 [VCP0] selected
module v2.89
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:BEE0:CBD5
status: FF
high speed boot Off
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #02 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #03 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [enhanced] generation
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.D0E73160.[M878TOS_PCB01_GPRS_MT6226_S01.M878TOS_00_09_LD.BIN _9E8FD928].rpl
rom info detection finished
device-id: D0E73160
rom info protocol ver: 04
ver. sw 1: M878TOS_PCB01_GPRS_MT6226_S01.M878TOS_00_09_LD.BIN
ver. sw 2: M878TOS_00_09_LD, D7267061
ffs offset/size: 00E00000/00200000
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 98004900000002:29EA0000000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detect device sec info...
detection phase #1...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: M878TOS_PCB01_GPRS_MT6226_S01.M878TOS_00_09_LD__ff s...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\M878TOS_PCB01_GPR S_MT6226_S01.M878TOS_00_09_LD__ffs_20090920-032426.B0E.bin
flash: 98004900000002:29EA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 98004900000002:29EA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\M 878TOS_PCB01_GPRS_MT6226_S01.M878TOS_00_09_LD__sys tem_log_D0E73160_9E8FD928_20090920-032445.B0X.bin
Finished, time used: 227 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[Riteshgpt60]

Chinese miracle 2.91 touch screen calibration Improved.
It can calibrate what older version can't.
Thanks Infinity Team,for all your sweet sweet UPdAtES!!!!!!!!!

[Shakeel_pattoki]

==== log: [9/23/2009 3:10:48 PM] ====
COM22 [Serial2] selected
module v2.82
Action: touchscreen calibration
mode: 4
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:0D03:000B
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: M2800_Abroad_S71PL1_ILI_V1.0.5
Version: LONGYU25_GEMINI_HW
detecting structure #2...
4 5 11 done
67 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-4)...
done
210 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Power-On and test phone now
If calibration is not completed yet:
1. make "Reverse calibration order" Checked and try again
2. try another calibration mode
Finished, time used: 21 sec
Remove/Install battery now !

[krish491]

Good Work......,,,,,,....

[mbiborna]

==== log: [9/30/2009 2:09:43 AM] ====
COM27 [VCP0] selected
module v2.89
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:0EC1:EE12
status: FF
high speed boot Off
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #02 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #03 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
921600
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [enhanced] generation
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.51FA335B.[V490_PCB01_GPRS_MT6226_S01.QR10_6LANG_V02_R05.BIN_ 21F7994A].rpl
====================
New firmware detected (v.2.89, database date: unknown):
V490_PCB01_GPRS_MT6226_S01.QR10_6LANG_V02_R05.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
device-id: 51FA335B
rom info protocol ver: 04
ver. sw 1: V490_PCB01_GPRS_MT6226_S01.QR10_6LANG_V02_R05.BIN
ver. sw 2: QR10_6LANG_V02_R05, B56608DE
ffs offset/size: 00E00000/00200000
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 01227E22202200:2AEA0000000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detect device sec info...
detection phase #1...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: V490_PCB01_GPRS_MT6226_S01.QR10_6LANG_V02_R05__ffs ...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\V490_PCB01_GPRS_M T6226_S01.QR10_6LANG_V02_R05__ffs_20090930-021124.B0E.bin
flash: 01227E22202200:2AEA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 01227E22202200:2AEA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\V 490_PCB01_GPRS_MT6226_S01.QR10_6LANG_V02_R05__syst em_log_51FA335B_21F7994A_20090930-021140.B0X.bin
Finished, time used: 89 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[mbiborna]

COM27 [VCP0] selected
module v2.89
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:BA03:0003
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #02 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #03 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
921600
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [standard] generation
====================
New firmware detected (v.2.89, database date: 10.08.2009):
KCM25_GEMINI_PCB01_GPRS_MT6225_S00.218_B++AM_31120 1_01_V0_1.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
rom info protocol ver: 04
ver. sw 1: KCM25_GEMINI_PCB01_GPRS_MT6225_S00.218_B++AM_31120 1_01_V0_1.BIN
ver. sw 2: 218_B++AM_311201_01_v0.1, 00000000
ffs offset/size: 00E00000/00200000
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 98000300000001:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detect device sec info...
detection phase #1...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: KCM25_GEMINI_PCB01_GPRS_MT6225_S00.218_B++AM_31120 1_01_V0_1__ffs...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\KCM25_GEMINI_PCB0 1_GPRS_MT6225_S00.218_B++AM_311201_01_V0_1__ffs_20 091001-084649.B0E.bin
flash: 98000300000001:18E59F00000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 98000300000001:18E59F00000000
Finalization Done
Finished, time used: 86 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

Done

[Shakeel_pattoki]

COM22 [Serial2] selected
module v2.82
Action: touchscreen calibration
mode: 2
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:C903:0001
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: BB13_BLE_L7EN_200_071226_HRILI9320_SIV0_SH75_CTF_B T_FM
Version: BET25_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-2)...
done
160 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Power-On and test phone now
If calibration is not completed yet:
1. make "Reverse calibration order" Checked and try again
2. try another calibration mode
Finished, time used: 12 sec
Remove/Install battery now !

[Shakeel_pattoki]

==== log: [10/3/2009 11:27:05 AM] ====
COM22 [Serial2] selected
module v2.82
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:C903:0001
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: BB13_BLE_L7EN_200_071226_HRILI9320_SIV0_SH75_CTF_B T_FM
Version: BET25_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
building list...
done
items to clear: 129
items cleared: 129 of 129
building list...
done
items remains: 0
Finished, time used: 26 sec
Remove/Install battery now !

[Shakeel_pattoki]

==== log: [10/5/2009 12:55:41 PM] ====
COM22 [Serial2] selected
module v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: repair "bad software" (mode-1)
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:9503:0005
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #02 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #03 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: SINGLE25_06B_PCB01_GPRS_MT6225_S00.A90V1_6_1.BIN
ver. sw 2: A90V1.6.1, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting firmware protection...
detecting firmware structure #8...
phase #1...
..................................
done
detecting firmware structure #9...
detecting area #1...
.......................................
area #1 is found
done
detection done: firmware protection
Finished, time used: 31 sec
Remove/Install battery now !
==== log: [10/5/2009 12:56:30 PM] ====
COM22 [Serial2] selected
module v2.82
Action: repair "bad software"
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:9503:0005
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: A90V1.6.1
Version: Single25_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 35968800422744
connection Ok
detecting structure #6 (mode-1)...
done
163 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 9 sec
Remove/Install battery now !

[mobile_hotman]

N81i_BLUETOOTH_CALIBRATION_DONE_SUCCESSFULLY

LOGS

COM5 [VCP0] selected
module v2.91
Action: touchscreen calibration
How to calibrate touchscreen:
- for this operation you need to have full flash backup from phone
- if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
- if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure

Do you have full flash backup ?
Loading file v.02...
TYM072720_702_PCB01_GPRS_MT6226_S01.072720_702_V11 25__fullflash_20090927-194039.B0M.bin loaded
detected record size adjusted
detected record size adjusted
detected record size adjusted
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:5441:14D0
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: 072720_702_V1125
Version: Tianyu26_06B_HW
44 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
512 byte(s) read
160 byte(s) read
reading data #2...
512 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 29 sec
Remove/Install battery now !

BR

[mbiborna]

COM27 [VCP0] selected
module v2.93
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:3D03:000E
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #02 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #03 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
921600
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [standard] generation
====================
New firmware detected (v.2.93, database date: 08.10.2009):
A25_B_V2_L4_PCB01_GPRS_MT6225_S00.GEMINI_1_0.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
rom info protocol ver: 04
ver. sw 1: A25_B_V2_L4_PCB01_GPRS_MT6225_S00.GEMINI_1_0.BIN
ver. sw 2: A25_B_V2_L4.GEMINI.1.0, 00000000
ffs offset/size: 00E00000/00200000
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detect device sec info...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: A25_B_V2_L4_PCB01_GPRS_MT6225_S00.GEMINI_1_0__ffs. ..
file saved: C:\Program Files\InfinityBox\ChineseMiracle\A25_B_V2_L4_PCB01 _GPRS_MT6225_S00.GEMINI_1_0__ffs_20091013-023831.B0E.bin
flash: EC257E25082501:18E59F00000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
ffs formatting...
flash: EC257E25082501:18E59F00000000
Finalization Done
Finished, time used: 87 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[InfinityHelp]

COM27 [VCP0] selected
module v2.93
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:3D03:000E
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #02 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #03 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
921600
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [standard] generation
====================
New firmware detected (v.2.93, database date: 08.10.2009):
A25_B_V2_L4_PCB01_GPRS_MT6225_S00.GEMINI_1_0.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
rom info protocol ver: 04
ver. sw 1: A25_B_V2_L4_PCB01_GPRS_MT6225_S00.GEMINI_1_0.BIN
ver. sw 2: A25_B_V2_L4.GEMINI.1.0, 00000000
ffs offset/size: 00E00000/00200000
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detect device sec info...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: A25_B_V2_L4_PCB01_GPRS_MT6225_S00.GEMINI_1_0__ffs. ..
file saved: C:\Program Files\InfinityBox\ChineseMiracle\A25_B_V2_L4_PCB01 _GPRS_MT6225_S00.GEMINI_1_0__ffs_20091013-023831.B0E.bin
flash: EC257E25082501:18E59F00000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
ffs formatting...
flash: EC257E25082501:18E59F00000000
Finalization Done
Finished, time used: 87 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

hello!

may i ask full backup if this phone to be sent us?
MT62xx@gmail.com
i will include it to our support area collection.
thank you in advance!!

[mbiborna]

hello!

may i ask full backup if this phone to be sent us?
MT62xx@gmail.com
i will include it to our support area collection.
thank you in advance!!

sorry sir this phone i already back to customer
its my mistake next time ....

[Shakeel_pattoki]

COM22 [Serial2] selected
module v2.91
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6228:8A02:8A02]...
CPU: MT6228
high speed boot On
chip: 0031:0000:0101
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6228,E02
Date: 2004.07.02
Version: 1.0
Version: MAUI.06B.W07.20.P726.MP.PM.1.1
Version: CBT28_06B_HW
detecting structure #2...
0 done
44 byte(s) read
warning: wrong packet cs
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
building list...
done
items to clear: 195
warning: wrong packet cs
items cleared: 195 of 195
building list...
done
items remains: 0
Finished, time used: 34 sec
Remove/Install battery now !

[Shakeel_pattoki]

COM22 [Serial2] selected
module v2.91
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot Off
chip: 0001:7A03:0002
status: FF
high speed boot Off
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #02 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #03 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [enhanced] generation
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.CFBF8290.[N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_5CDGB_ S5LCD_V1_5_8.BIN_94D5809F].rpl
rom info detection finished
device-id: CFBF8290
rom info protocol ver: 04
ver. sw 1: N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_5CDGB_ S5LCD_V1_5_8.BIN
ver. sw 2: N66_ABROAD_5CDGB_S5LCD_V1.5.8, 607F2A6B
ffs offset/size: 00E00000/00200000
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 98000300000001:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detect device sec info...
detection phase #1...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_5CDGB_ S5LCD_V1_5_8__ffs...
file saved: C:\Documents and Settings\Shakeel Software\Desktop\N66_ABROAD_PCB01_GPRS_MT6225_S00. N66_ABROAD_5CDGB_S5LCD_V1_5_8__ffs_20091016-113116.B0E.bin
flash: 98000300000001:18E59F00000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
ffs formatting...
flash: 98000300000001:18E59F00000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\N 66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_5CDGB_S 5LCD_V1_5_8__system_log_CFBF8290_94D5809F_20091016-113214.B0X.bin
Finished, time used: 276 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

[mbiborna]

==== log: [10/16/2009 1:06:18 AM] ====
COM27 [VCP0] selected
module v2.93
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:C103:000F
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #02 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #03 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
921600
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [enhanced] generation
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.17063283.[ZL28TD_LXT_PCB01_GPRS_MT6225_S00.MT100_V1_09.BIN_B E021AA8].rpl
====================
New firmware detected (v.2.93, database date: unknown):
ZL28TD_LXT_PCB01_GPRS_MT6225_S00.MT100_V1_09.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
device-id: 17063283
rom info protocol ver: 04
ver. sw 1: ZL28TD_LXT_PCB01_GPRS_MT6225_S00.MT100_V1_09.BIN
ver. sw 2: MT100_V1.09, 57E5FD41
ffs offset/size: 00E00000/00200000
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 98004900000002:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detect device sec info...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: ZL28TD_LXT_PCB01_GPRS_MT6225_S00.MT100_V1_09__full flash...
file saved: C:\Documents and Settings\mohiuddin\My Documents\ZL28TD_LXT_PCB01_GPRS_MT6225_S00.MT100_V 1_09__fullflash_20091016-011402.B0M.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\Z L28TD_LXT_PCB01_GPRS_MT6225_S00.MT100_V1_09__syste m_log_17063283_BE021AA8_20091016-011409.B0X.bin
Finished, time used: 452 sec
Remove/Install battery now !

[InfinityHelp]

hello mr.mbiborna!!

can you send us flash file read from this phone?
we need it for our support area collection.
MT62XX@gmail.com
thanx in advance!

[mbiborna]

hello mr.mbiborna!!

can you send us flash file read from this phone?
we need it for our support area collection.
MT62XX@gmail.com
thanx in advance!

Thanks sir for replay i already mail u.
plz chek this id MT62XX@gmail.com

[Shakeel_pattoki]

COM23 [VCP0] selected
module v2.80
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:A1C1:812E
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: MAUI.05C.W06.12.F1
Version: V6_HW
detecting structure #2...
done
60 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-1)...
0 1 done
204 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Finished, time used: 59 sec
Remove/Install battery now !

[Shakeel_pattoki]

==== log: [10/20/2009 12:28:45 PM] ====
COM22 [Serial2] selected
module v2.80
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6217:8A00]...
CPU: MT6217
high speed boot On
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6217,E00
Date: 2004.07.02
Version: 1.5.1.3
Version: YW6217.Y300Z_HX_1.5
Version: YW6217_HW
detecting structure #2...
done
57 byte(s) read
imei: 35301600005439
connection Ok
building list...
done
items to clear: 133
items cleared: 133 of 133
building list...
done
items remains: 0
Finished, time used: 33 sec
Remove/Install battery now !

[Shakeel_pattoki]

COM3 [VCP0] selected
module v2.91
Action: touchscreen calibration
How to calibrate touchscreen:
- for this operation you need to have full flash backup from phone
- if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
- if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure
Do you have full flash backup ?
Loading file v.02...
BV_6225_GEMINI_PCB01_GPRS_MT6225_S00.C002_2_1_GEMI NI_0838_MP_V2__fullflash_20091112-110836.B0M.bin loaded
detected record size adjusted
detected record size adjusted
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:4703:0007
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: C002_2_1_GEMINI_0838_MP_V2
Version: HEXING25_GEMINI_HW
67 byte(s) read
imei: 35755601014149
connection Ok
512 byte(s) read
210 byte(s) read
reading data #2...
512 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 15 sec
Remove/Install battery now !

[mbiborna]

touchscreen calibration successfully

module v2.96
Action: touchscreen calibration
How to calibrate touchscreen:
- for this operation you need to have full flash backup from phone
- if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
- if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure

Do you have full flash backup ?
Loading file v.02...
R218C_PCB01_GPRS_MT6225_S00.R218GN_HED_S303_V04_09 0423__fullflash_20091113-120306.B0M.bin loaded
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:D803:0003
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E05
Date: 2006.06.14
Version: 1.0
Version: R218GN_HED_S303_V04_090423
Version: PHONE25_GEMINI_HW
67 byte(s) read
imei: 35174202710320
connection Ok
512 byte(s) read
209 byte(s) read
reading data #2...
512 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 10 sec
Remove/Install battery now !

[mobile_hotman]

NOKIA_N95_8GB restarts with sim inside DONE_SUCCESSFULLY

LOGS:
------

FFS_COMPLETE_MODE:
-------------------------

COM6 [VCP0] selected
module v2.98
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:7A2C:0D47
status: FF
high speed boot Off
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #02 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #03 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
searching rom info...
search rom info finished
rom info structure: 2nd [enhanced] generation
TCL-ID is absent
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.F6217D0C.[T6226_05C_PCB01_GPRS_MT6226_S01.A10_ALL_V0324A.BIN _BBFCB0BC].rpl
rom info detection finished
device-id: F6217D0C
rom info protocol ver: 04
ver. sw 1: T6226_05C_PCB01_GPRS_MT6226_S01.A10_ALL_V0324A.BIN
ver. sw 2: A10_ALL_V0324A, BCB0FCBB
address offset: 00000000
ffs offset/size: 00E00000/00200000
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: T6226_05C_PCB01_GPRS_MT6226_S01.A10_ALL_V0324A__ff s...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\T6226_05C_PCB01_G PRS_MT6226_S01.A10_ALL_V0324A__ffs_20091114-182654.B0E.bin
flash: 01227E22202200:29EA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
ffs formatting...
flash: 01227E22202200:29EA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\T 6226_05C_PCB01_GPRS_MT6226_S01.A10_ALL_V0324A__sys tem_log_F6217D0C_BBFCB0BC_20091114-182720.B0X.bin
Finished, time used: 242 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

BR

[Shakeel_pattoki]

COM23 [VCP0] selected
module v2.91
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection disabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:7070:8185
status: FF
high speed boot Off
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung D 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung D 16Mb
detecting chip #02 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung D 16Mb
detecting chip #03 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung D 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung D 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung D 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [enhanced] generation
startup code area #1 is Ok
startup code area #1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.A4E1D8AC.[T6226_05C_PCB01_GPRS_MT6226_S01.A8_SE_VTRAIMF_V091 3.BIN_89E6D8FF].rpl
rom info detection finished
device-id: A4E1D8AC
rom info protocol ver: 04
ver. sw 1: T6226_05C_PCB01_GPRS_MT6226_S01.A8_SE_VTRAIMF_V091 3.BIN
ver. sw 2: A8_SE_VTRAIMF_V0913, 00271976
ffs offset/size: 00E00000/00200000
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: EC257E25082501:29EA0000000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detect device sec info...
detection phase #1...
.
detect device sec info finished
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: T6226_05C_PCB01_GPRS_MT6226_S01.A8_SE_VTRAIMF_V091 3__ffs...
file saved: C:\Documents and Settings\Shakeel Software\Desktop\T6226_05C_PCB01_GPRS_MT6226_S01.A 8_SE_VTRAIMF_V0913__ffs_20091117-180220.B0E.bin
flash: EC257E25082501:29EA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
ffs formatting...
flash: EC257E25082501:29EA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\T 6226_05C_PCB01_GPRS_MT6226_S01.A8_SE_VTRAIMF_V0913 __system_log_A4E1D8AC_89E6D8FF_20091117-180322.B0X.bin
Finished, time used: 417 sec
Remove/Install battery now !
File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !