View Full Version : Need Cect Q300-A Flash File
Need Cect Q300-A Flash File & eeprom File for dead set,i download cest Q300A flash file in supportsite and flash the phone but phone is still dead
InfinitySupport
11-04-2007, 03:30
Need Cect Q300-A Flash File & eeprom File for dead set,i download cest Q300A flash file in supportsite and flash the phone but phone is still dead
1. you must make ask/rpl calculation http://www.gsmhosting.com/vbb/showthread.php?t=452251
2. what is original firmware version ?
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: T600_B_LSM_V218_070221_LCM1289_OV7660
I already write rpl but phone still dead,i need correct flash file and eeprom file.
1. you must make ask/rpl calculation http://www.gsmhosting.com/vbb/showthread.php?t=452251
2. what is original firmware version ?
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: T600_B_LSM_V218_070221_LCM1289_OV7660
InfinitySupport
11-04-2007, 17:35
Try to use other files with firmare version like T600_B_LSM...
Also you must check phone hardware !
thanks for ur support i got the correct flash file and phone will alive,thanks again.
moustafatch
11-20-2007, 23:19
which pinout u use with this phone cect q300-a nokia n95 ?
it's 2x6 connector and one sim card and don't have any point for tx and rx in the pcb
InfinitySupport
11-21-2007, 01:02
which pinout u use with this phone cect q300-a nokia n95 ?
it's 2x6 connector and one sim card and don't have any point for tx and rx in the pcb
Due to a lot of different models with the same name but absolutely different hardware,
bottom connectors and different pinouts we recommend you to include the next info:
1. detailed description of model
2. phone CPU chip name
3. phone PCB photo (Rx/Tx/Gnd test-points may exist on phone PCB)
4. attach phone photo
5. attach phone bottom connector photo
6. include information about Gnd and Charge pins on phone bottom connector
After you have this information prepared, check the next detailed description how to get pinout for your model:
use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle\
if not helps, please read: http://www.gsmhosting.com/vbb/showpost.php?p=2212036&postcount=7
if not helps, please read: http://www.gsmhosting.com/vbb/showthread.php?t=433447