View Full Version : AnjelGsm BF-xx Alcatel Service free
OMBOSSMAN
06-19-2002, 22:18
hi all friends
AnjelGsm BF-xx Alcatel Service
just here http://free.ombossmangsm.com
special thanks anjelgsm
To UNLOCK Your Phone ...
Tested 100 % but only Work's in Windows 98 .
Firt Read Partial Backup ... Done
Next Edit Partial Backup in HexaWorkShop and Shearch this Value 03 28 00 D1 00 20 and
Replace to 01 20 00 D1 02 28
then put this File in Folder \Unlock Partial ... done
Then Run sw again press Connect then select UNLOCK .... :))))
After if you have a phone this Version of Partial(Readed) Don't need to do this put currect version
to currect Phone
that it ...
P.S. send me Report
Can also find it in my FTP:
FTP: 217.129.244.254
PORT: 21
USER/PSW : GSMPT
Enjoy my mate's AngelGsm Soft.
Work with Alcatel 511 too ???
and alcatel 711 too RIGHT?
sorry guys, but this soft dosen´t work, every time that i conect the phone to the pc and press the conect buttom, the phone say:
"detecting phone.......error" , sometimes the phone turns on after the prog give the error message, but it turn´s off by it self too.Why is it hapening, does someone knows???? Did anyone else tryed to unlock some bf4 with this software.I´m using the interface that came in the zip file with the softw, wich works very well with other flash programs.HELP PLEASE :(
Maybe speed of computer is important ???
Please Ombossmann tell us what is test machine ?
For Windows 98 i understand...
V.S@ you should be sorry yes, but coz of something u dont know how to do.
1) open program
2)connect cable to COM1
3)click on CONNECT and quickly connect the cable to the phone
DONT FORGET only works under Win98 / Win98 SE
And there's un update on the ftp with some bugs fixed
OMBOSSMAN
06-20-2002, 19:19
hi angele
my computer celeron 650 mhz 64 mb ram
win98 second edition works system
schwantz
06-20-2002, 20:05
See this
http://www.schwantz.hpg.ig.com.br/web3/1.gif
http://www.schwantz.hpg.ig.com.br/web3/2.gif
http://www.schwantz.hpg.ig.com.br/web3/3.gif
http://www.schwantz.hpg.ig.com.br/web3/4.gif http://www.schwantz.hpg.ig.com.br/web3/5.gif http://www.schwantz.hpg.ig.com.br/web3/6.gif
NEW UPDATE
More bugs fixed (fixed some probs on pc's communication soft/phone)
Avaible for download on my ftp server (see adress on my previous posts pls)
Enjoy
ON WHAT TYPE OF PC WORK 100%. MY PC IS CELERON , 566MHZ 128MB, AND THE SOFT DON"T WORK
on my duron 800MHz connect but at phone type is something like this _ð;`àÿ and when I try to do some job I get this:
Phone type not supported ...
Contact for Updates ...
in the schematics I don't use capacitors with 2.2uF, maybe this is the problem?
Schwantz.............
we need link for download plz
hi all friends
good working men this solution is 100% worked.
good work.
hi all
good good program
thx man & good man
ICQ :117887605
Best regards
bop_gsm
:D :rolleyes: :D
OMBOSSMAN
06-20-2002, 23:26
AnjelGsm BF-xx Alcatel Service update just here http://free.ombossmangsm.com
special thanks bcool
;)
Gud work OMBOSSMAN very cool and easy to use.,does ur sw can kill phone "just in case" could there be a remedy?thnx:D
I have problem with cable,maybe...
Please someone explain what is right cable for this prog,please
Where....link for download??
Regards Xavien
Have downloaded, I think we can share unlockpartials and languages, I'll open an FTP soon.
U can download it from here:
ftp: 217.129.244.254
user/psw: GSMPT
Enjoy
angelo71
06-21-2002, 16:14
http://groups.yahoo.com/group/gsmhack-crew/files/Alcatel/311_Unlock_v1.0_by_Angelo.zip
Help!
I waste 12 hours to try to connect phone with this software on 3 machines,with various cables,but no stable connection with phone/i mean BF-4/ Allways read bullshirt HELP HELP HELP !!!!!!!
[MATRIX]Neo
06-21-2002, 17:22
Hello ! :)
Pease tell me where i can find Russian language pack for Alcatel 311 and 511 (BFxx) ??? I need it for AnjelGSM 2002 and need russian pack for it ! Please help me !
Best regards from Russia
OMBOSSMAN
06-21-2002, 18:22
AnjelGsm BF-xx Alcatel Service full
my site oversize limited and closed big thanks all members ?
new uploaded just here
http://groups.yahoo.com/group/OMBOSSMAN/files/update/
:D :D :D :D :D :D :D :D :D :mad:
ombossman saýd that thank aloooooot to be ýnterested alcatel software .but your sýte ýs not workýng and anather way ýs yahoo adress
good work
KENWOOD AND OMBOSSMAN TOGETHER
PROGRAM NOT WORGING!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!NOT WORKING!!!!!!!!!!!!!!!!
PROGRAM IS FAKE!!!!!!!!!
Dody
1) it was NOT onbossman who has made the soft
2) the soft do WORK
Nobody is guilty if u DONT KNOW HOW to make it work.
Now... try this: get a be4 cable, cut off the coonector and put a bf connector.
shhheeessshh
HE HE HE!!!!!!!!!!!!!!!!!!!!!!!!!!!!
NOT WORKING!!!!!!!!!!!!!
hehe it do works.....
use brains not only CLICK... rofl
OMBOSSMAN
06-21-2002, 23:03
program is works or not works i dont tested i dont know
andrew_gsm
06-22-2002, 11:39
Where can I download it?
I can't open ftp server
angele im old enuff and gorwn enuff to not be afraid of the buggy man..
and about nightmares... serious people dont have those.
So if u r having nightmares its maybe coz ur doing something u shouldnt.
Maybe the software is working but i think the timeouts aren't good. Maybe the delay between the commands is made with CPU tacts. That is why is not working on different computers. It does't work for me neither.
But is free - take it or leave it. If you want good software buy it.
That's the way.
Regards to all
P.S. Anjelo keep up the good work but remeber - when you give for free many will blame you. Is a pitty for the hours you invested in your work.
Worx fine with me : ) Use ur brain it's not difficult just follow the thread....Regards Angele i like ur sw:D :D :D
Final version fully functional and 100% working on 311/511
Bugs fixed and some connection probs corrected.
Avaible for download at:
ftp: 217.129.244.254
user / psw: GSMPT
When using the software pls send us partial flashes so we can update the database and make them avaiable for download.
how to download partial flash file for bf3 KJ 155 ?
Thanks
Some partial files were included in the first version.
Ive just included partials in the final version too (full).
Anyway partials u make them urself when u first read the phone.
electrohicham
06-23-2002, 23:07
ur adress ftp given don't work for me plz help me plz
:( :(
ok thanks, an how to download the first version?
Hi All
to bcool:
LINK not WORK.........
-=G3=-
hi
Link not work
link dead :( :(
ICQ : 117887605
bop_bop_gsm
Best regards
bop_gsm
:mad:
Link works now.
You may download the soft.
electrohicham
06-24-2002, 08:04
plz help link still not work:(
It will be working tomorrow morning.
and u have choosen a bad timming coz it was working almost all afternoon and evening. sorry
electrohicham
06-24-2002, 10:02
think you verry much sir;)
rolko_mobile
07-17-2002, 17:43
Pls can any one send me this ver 2.0 final edition ? I can't download.
Originally posted by rolko_mobile
Pls can any one send me this ver 2.0 final edition ? I can't download.
Sent to your mailbox at yahoo.fr
/Odartei
groupsky
07-17-2002, 19:57
look hir
[URL]http://groups.yahoo.com/group/sarahmino-gsm/files/
;)
Originally posted by bcool
Dody
1) it was NOT onbossman who has made the soft
2) the soft do WORK
Nobody is guilty if u DONT KNOW HOW to make it work.
Now... try this: get a be4 cable, cut off the coonector and put a bf connector.
shhheeessshh
how to wire.can your post for schematic?
THX IN ADV
hi
i have one question i can connect and read flash full and backup
but every time i try flashing it only kill my phone ?
it says phone unlocking done i thought straight when i selected the part file but i didn ;t flash it it only errase or something and same with backup it can read but it can ;t flash....
to all
now soft get :
Detecting Phone ... OK
Flash ID: FE7C-unknown
Phone Version: _àþ
Select Job's .
somtime get:
Detecting Phone ... OK
Flash ID: 0300-unknown
Phone Version: _xþÀÿþ
Select Job's .
somtime get
Detecting Phone ... OK
Flash ID: 8380-unknown
Phone Version: _
Select Job's .
when i select Read Partial Backup it get
Reading Backup Wait...
i waiting about 10 MIN but not heppen
what i wrong
OMBOSSMAN
07-20-2002, 00:03
hi all friends
AnjelGsm Acatel BF-xx Final and wery fast unlock just here
www.ombossmangsm.com go free section
:rolleyes: :rolleyes: :rolleyes:
hello,
I just kill one 511 v. 10D 127. I read full flash with anjelgsm, read partial backup with the same program and to the end I press unlock. The phone was unlocked successfully. I put the sim card inside, found network and I stop the phone , after that he never starting up( write partial backup, write his original full flash ..nothing). Can somebody give me a hint?
thanx
full flash from 511 have 2Mb or more?
Hi,
511 - 4Mb flash
Check link may help you:
http://www.odblokgsm.sk/download/
frenchi
Hi all,
Lot of free software in my group
http://groups.yahoo.com/group/unlockmaster
Thanks
Jab
hi,
i make a cable for ot311 as AnjelGsm Alcatel 311 & 511 cable with rs232 interface schematic.
1 to GND
2 & 3 short to RTS
4 to TX
5 to RX
but can't to connect to the phone. why???
help!
thanx
The link for the first version does NOT seem to work....can someone pls send it to me with older partials.?10x
Link not work ,please send email. thank!
baby624@163.com:(
OMBOSSMAN
07-30-2002, 18:11
Anjelgsm first version just here http://www.ombossmangsm.com/free
http://www.schwantz.hpg.ig.com.br/web3/1.gif
http://www.schwantz.hpg.ig.com.br/web3/2.gif
http://www.schwantz.hpg.ig.com.br/web3/3.gif
http://www.schwantz.hpg.ig.com.br/web3/4.gif
http://www.schwantz.hpg.ig.com.br/web3/5.gif
http://www.schwantz.hpg.ig.com.br/web3/6.gif
O M B O S S M A N special thanks angelo and schwantz
Burnt Cobba
07-31-2002, 04:28
after doing partial unlock phoen is unlcoked but switches off whenaasks to set tiem and date
signs of a bad unlock??
thanks
alv
the link not work with me why
OMBOSSMAN
08-03-2002, 16:12
try again
sqeezynl
08-03-2002, 18:45
I followed this thread and I mentioned that nobody has a good answer on this question. how to make a good 311/511 cable?
does anybody here has a good cable and works 100% and how can I make or get the cable for myself?
Is the max232 component a normal component or is it a little different from thje other normal datacables.
so can anyone tell me what components I need and what the schematic is or do you know what the best possibillity is.
I have heard that when you have a BE4 cale and you cut the be connector off and you connect a BF connector the cable must work.
can anybody sort this out and post it on this forum so anybody can make this goodworking cable.
greeting Maikel