View Full Version : V3i Bootloader Screen When Put In Battery
wirelessrush
11-17-2007, 03:05
As soon as I put in the battery in my V3i the boot loader screen comes up. This is software issue that started after I flashed it. RSD Lite v4.1 is not recognizing the phone and the phone will only stay in the boot mode. Here is the information that comes up on the screen:
Boot Loader
0A.52.
SW Version:
R47A_G_08.D8.88R
Any suggestion will be appreciated.
sir just fullflash the phone with the same version it will solve your problem 100%
oh! by the way use smartclip bcoz it is not supported by RSD lite as you had mention.
kashi4gul
11-17-2007, 03:35
Ist repair PDS then flash ur phone
with same or higher ver .......
B.R.,
kashi4gul
wirelessrush
11-17-2007, 05:59
Thanks for your replies. I'll try your solutions and post the results.
if i am not wrong this phone has been flashed with wrong Flash file.
it Must be R3443U2 or R4515 software version previously
BR.
wirelessrush
11-17-2007, 09:21
Afzaal, You may be right. The phone got screwed up after flashing which means most likely I used the wrong flash. I'll try to find out what is the correct flash file. I hope I can find another phone like it to check its flash version.
wirelessrush
11-20-2007, 06:55
Today I checked another phone just like the one I messed up, and it has R47A_G_08.D8.88R version. I flashed my defective phone but it is still having the same problem. The good news is that it is being recognized by RSD Lite. Would someone please post a link to the correct flash file. Thanks
and what was Boot Version of ur same V3 ?
BR.
wirelessrush
11-20-2007, 18:27
Yes. 0A.52. Thanks Afzaal
its RAZR V3i iTunes
scroll down for last 4 f/w
http://planetmotox.net/razr_v3i.php
goodluck
wirelessrush
11-21-2007, 03:38
Thanks Afzaal. I tried all 4 flash files with no success. I tried to do a boot repair using my Smart-Clip, and i got this message:
Searching for phone...found S Flash Neptune LTE2 getting test interface...interface not found
Switching to flash mode...OK
Reading boot version...A.52
Boot repair failed
And on the phone screen I got:
Critical Error
80
40
I am running out of options. I hope this gives you guys a better idea what might be wrong with this phone, and how we can fix it. By the way I have acces to MSS4 as well (not the Box II yet).
"Critical Error
80
40"
is it need test point
wirelessrush
11-21-2007, 04:01
hooi76, thanks for quick reply. So you think boot repair with TP will fix it?
wirelessrush
11-21-2007, 05:14
Repair PDS with TP worked.
Boot Loader
0A .30.
SW Version:
R47A_G_08.D8.35R
I flashed it couple of time but problem still persists.