View Full Version : alcatel bf3 free by angelo be carefull...
hi could some one help me please i had fu******cked up bf3 while i was trying to unlocked it with 311 unlock v1.2 by Angelo,First off all i´ve made a backup with omega flasher, then i save the eeprom zone with the soft by Angelo, after this i pressed the unlock buttom, the prog start´s to unlock the phone and when it finished the phone didn´t turned on anymore.i have already upload the omega backup to the phone( i think that the file are corrupted) but it doesn´t work, and i did the same thing with the eeprom zone backup, but nothing ,(.Now i dont know how can i repair it ,(((((.Please help me Anjelo .
Does anyone can get me an full flash backup from alcatel bf3 311 pleaseeeeeeeee, then we all going to know if is it possible to clone the alcatel bfxx.
angelo71
06-24-2002, 21:44
When you kill the phone simply use a hexeditor like HexWorkshop or other ! In one good file with same version replace byte's from 1A0000 to 1FFFFF with the eeprom backup file and write new file to phone !
If you can't use hexeditor :
Write a good full flash in phones (clone it ) with same version after write back the original eeprom zone WITHOUT TO GET OUT THE PHONES FROM TEST MODE BETWEEN THE TWO OPERATION !
If you not have a saved full flash mail me provate and i will send to you ! prodemos@xnet.ro
Anjelo71, check your mail please.thks
hey Anjelo71 , why don´t you help, you said if i write a mail explaining every thing you would send me a full flash. Is it so difficult? help pleaseeee:(
[MoOkIe]
06-26-2002, 04:02
Originally posted by V.S@
hey Anjelo71 , why don´t you help, you said if i write a mail explaining every thing you would send me a full flash. Is it so difficult? help pleaseeee:(
Why don't you do what he suggested to u???
It's not that hard...
;)
Bye.
because i´d already send him a mail requesting a full flash file and some tips to learn to repair my dead BF3 311 phone. And this is wath he told me to do.:(
Hi man!
Contact me at messenger cosmin44@yahoo.com or icq: 149039664
I will try to help U!]
My best regards to all!
cosmo
I have killed 310 alkatel(KJ246 UMC locked) with program Angelo 311 Unlocker v1.0(this soft kill 310 alcatel UMC locked). Before I backup eeprom zone! For restore I write full flash with other 310 KJ246 and write eeprom backup with Angelo. And 310 alive :-)
Sorry bad english!
[MoOkIe]
06-26-2002, 20:28
Originally posted by razor
I have killed 310 alkatel(KJ246 UMC locked) with program Angelo 311 Unlocker v1.0(this soft kill 310 alcatel UMC locked). Before I backup eeprom zone! For restore I write full flash with other 310 KJ246 and write eeprom backup with Angelo. And 310 alive :-)
Sorry bad english!
That is what V.S@ must do... :)
Bye.
Reallllllyyyyyyyyyyyyyyyyyyyy??????????And wy do you think that i´m asking for a full flash almost four days??? [MoOkIe]
[MoOkIe] , Já que és portuguęs, eu explico-te na nossa lingua,assim
talvez consigas entender melhor o que se passa. O Anjelo71 năo me deu nenhuma novidade, simplesmente me disse para lhe meter uma full backup, mas o meu Problema é que eu năo tenho nenhum 311 para fazer uma full flash backup para programar este que eu matei, foi entao que depois de explicar tudo isto ao Anjelo71 (autor do soft que matou o meu trélélé) ele se ofereceu para me arranjar a tal full, mas até agora nadaaaaaa, percebeste agora??????
:rolleyes:
But thank´s anyway.
[MoOkIe]
06-27-2002, 03:51
Hello.
Mr. V.S@,
First of all, you still haven't specified the software version you want....
Second, if you were wise engough you would open a new thread requesting the desired flash file.
As far as i'm concerned, i'm done with this topic.
Have a nice life.
wassup with u guys??
chill it both of u
[MoOkIe], has i already said in my last post.....Thanks any way for your help, dont take it personal, i just want you to understand why i was mad. ;) .And once more...
DOES ANY BODY CAN GET ME AN ALCATEL BF3 311 FULL FLASH???
I have an 511 vers k125 full flash (flash+eeprom) with Portuguese language package.thks
[MoOkIe]
06-27-2002, 11:33
No hard feelings.
Can't help you, i don't have such a flash.
Bye.
I have 2 fls.(2Mb included e2p) but my Internet connection is too slow,but if you wanna Ill try to send it to you.
WBR:
Partyman;)
are they for alcatel bf3 311???
and yes, the flash file must have 2 mb , please send it to me ...i will be very gratefull to you.
V.S@netc.pt
How is it possible that no one can give me an alcatel Bf3 311 flash???Come one ppl, we all need help sometimes, fuc**************k, i´m hasking for a flash more about a week , i have an 511 full flash if some one need´s it,But pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee eeeeeeeeeeeeeeeeeeeeeeeeeeee, someone get me a 2 mb flash file for bf 3 311, not with Omega flasher, because flash file gets corrupted, but with some other prog, like Angelgsm2002.i want to clone an 311, if it work´s we all will be able to make software upgrade to this model.
H E L P
[MoOkIe]
06-29-2002, 05:36
I would advise you to open a new topic regarding that question...
More people will see it... ;)
Bye.
Just give me mail or group and Ill send you Flash files.Todai I`m online
ghettosuperstar
06-29-2002, 20:07
I conect the phone with any sw and got this:
Label version: ˙˙˙
Software version not supported yet
Contact the author
Software version: ˙˙˙˙˙
Hardware version: BF31W-1HATES3
Base language: SJ140011
Extended language: OJ140412
Crypted Imei: 31HB2310I22CD43
and I can only write a flash file... Eeprom write is not available...
I think my phone's flash is damaged....
Any solution?
Any website to find full flash files for alcatel?
ghettosuperstar@aeiou.pt
Thank you in advance
Please send it to me v.s@netc.pt
if it works i will tell you guys ; )
thk´s a lot
yes v101 kj133 if you're interrested.
Ok, finally my 311 is working again.I used the bf3 flash tools 1.4 , and one good full flash backup ( many thanks´to Seeker, and Info@hkgsm.com, and to all the others who gived me some tips to repair the phone). I opened the prog and chose the option "Open flash" , then "open eep" I opened my eeprom zone backup, then i pressed the "insert eep" option, (this will make the flash work with some other eeprom)Finally i pressed the unlock option, then save.When i just upload this new flash into the phone, it worked. :) ;) :)
Thanks for everybody that lost some minutes trying to help me.:p
Originally posted by V.S@
Ok, finally my 311 is working again.I used the bf3 flash tools 1.4 , and one good full flash backup ( many thanks´to Seeker,
Thanks for everybody that lost some minutes trying to help me.:p
Can you share BF3 flash tools v1.4 with us? Where to
DL that SW?
ok, no problem, just click in this link...:)
http://www.mobitel.ro/bf3cable_gsmforum.zip
Good software
;)
sorry, that´s not "bf3 flash tools v1.4, but it´s a nice prog too, if some one want´s this soft, here is the key:
Name: mobitel
Key: B4A3-9C20-72C9-9698-8AAC-3967-40A4
and now the real bf3 flash tools v1.4...
http://www.mobitel.ro/bf3%20flash%20tools%20v%201.4%20.zip
Features:
repair alcatel 311 by flash
unlock alcatel 311 by flash
insert old eeprom in new flash
working with *.bin files
:D