How to reset Security code on BB5 Nokia phones - easy solution

[florim]

Here's how to reset Security code on BB5 Nokias.

You need a Data cable that comes with your phone and Nemesis Service Suite(later named as NSS) (http://www.megaupload.com/?d=XQXMG5T1)installed on your PC.Download and pdg4fbus.dll patch that is offered there-at the bottom of the page,the installation instructions for him are included in same zip archive.

Connect normally turned on phone to the cable and install drivers for it,is asked.
Start NSS and click on magnifier glass - marked with mouse cursor.
http://img341.imageshack.us/img341/2591/nss1lb5.jpgWhen driver and other NSS software informations are displayed,click on big Phone Info (1.) button and then on little Scan (2.) button.If everything is OK you will get message Done! (field marked with arrow).
http://img341.imageshack.us/img341/2702/nss2tk0.jpg

Now click on big Tools (3.) button,
http://img340.imageshack.us/img340/2949/nss3qj4.jpg

then on tab Factory Settings (4.)
http://img340.imageshack.us/img340/9334/nss4gl9.jpg (http://img340.imageshack.us/img340/9334/nss4gl9.jpg)

now here,if you have a Symbian phone then you must check Symbian box (it is above the Reset button marked with 6.),if you have S40 3rd phone then leave Symbian unchecked.
Select User code (5.) if not allready selected and click on Reset (6.) button.
If everything goes well message Done will appear again in that field marked in second picture+those messages in regular information window.
http://img340.imageshack.us/img340/5376/nss5dy5.jpg

That's it,your Security code is set to factory 12345 again.

[m4m]

if the phone locked u can't found the phone by nemesis tools

which mean if the phone ask for the security code at start u can't use usb mode!!!

correct me if im wrong?

its usfulll if the phone start and u can use it but u dont know the security code then u can use this tools.

[vmin81]

If The Fone Is Lock So We Will Connect It To Applcation Dude We Are Still Not Login Fone So Howww

[Gall]

Old method...
Author is a stupid man, use SEARCH! :mad:

[vmin81]

Old method...
Author is a stupid man, use SEARCH! :mad:


WHAT DO MEAN MAN IT RUMMER OR WHAT MORE EXPLAIN

[**RABIOS-TE@M**]

old !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[mkwatis]

@florim;
How to with nokia 5200/5300

[ahhongchai]

if the phone locked u can't found the phone by nemesis tools

which mean if the phone ask for the security code at start u can't use usb mode!!!

correct me if im wrong?

its usfulll if the phone start and u can use it but u dont know the security code then u can use this tools.




yes ...................u rite , phone cant found went lock by usb

[pitone02]

put 5kohm resistor to bsi phone connector so phone goes in testmode.

then use the nss

[nagold]

This easy solutions its for people who dont have a box, the phone must be in test mode to make connection and its verry useful in this case.
Put 5 Kohm resistor to BSI line and phone goes in test mode.

[kalodner]

When i try to reset the user code on my 5500 with NSS i get an error (Reset Factory... Error!)... What can i do to reset the user code?

[sairat]

put 5kohm resistor to bsi phone connector so phone goes in testmode.

then use the nss


ITS GOOD I THINK ITS USEFULL...........................!

[layna]

This easy solutions its for people who dont have a box, the phone must be in test mode to make connection and its verry useful in this case.
Put 5 Kohm resistor to BSI line and phone goes in test mode.



yes that's right, phone must to be in local or test mode to read user code


you can use nss or jaf crack.

[Jr Telecom]

Modem driver ll not get while phone is security locked
So need Fbus modified usb not usable that mode.......

[layna]

as i say ,if your phone is in local mode you can use usb data cable , no matter if it security locked

[Knowledge]

This easy solutions its for people who dont have a box, the phone must be in test mode to make connection and its verry useful in this case.
Put 5 Kohm resistor to BSI line and phone goes in test mode.

I have tried putting a 8.2k resistor and a 10k resistor, as instructed by to by other users on this forum, and nothing happened. It booted up and ask for the lock code just as normal, it did not go into Local Mode or Test Mode.

My question is, can anybody be more specific on how to do this?

What I did is take the resistor and put one leg on the BSI line and one leg on the - line of the back battery terminals, then attached the battery, plugged in the Nokia USB cable, and powered up the phone. Is this wrong? Should there be another step that I'm not taking?

Thanks alot in advance... I really do appreciate it.

[layna]

wich model is your phone, try with 4.8 to 5.3k and power on your phone , then plug the cable.

[KMHON]

I have tried putting a 8.2k resistor and a 10k resistor, as instructed by to by other users on this forum, and nothing happened. It booted up and ask for the lock code just as normal, it did not go into Local Mode or Test Mode.

My question is, can anybody be more specific on how to do this?

What I did is take the resistor and put one leg on the BSI line and one leg on the - line of the back battery terminals, then attached the battery, plugged in the Nokia USB cable, and powered up the phone. Is this wrong? Should there be another step that I'm not taking?

Thanks alot in advance... I really do appreciate it.

Do not take any resistor, just use UFS, JAF or NSS flasher cable, while NSS program are running, press the power button and the phone will display local mode. Connect the data cable and the pc will automatically ask for driver, after installing all the driver you can use the data function of NSS to reset the software of the phone.
In case you do not have cable for the unit, you can use any dct 4 flasher cable, the most important thing is that the battery terminal of the phone will contact correctly to the flasher cable terminal. you can cover with masking tape temporarily the flashing pin terminal of the flasher cable in case it will not fit correctly.

another tested procedure for DCT4 and BB5:...

If you will use the full factory reset function of NSS, you do not have to use any flasher cable, just insert the battery, power on the phone in normal, connect usb data cable, after installing the driver, click scan, then click factory reset.
Note: NSS must installed using " Usb virtual port "

[sekar_k]

How to unlock Security code on nokia 6233

[akhil_bbsr]

hai dear friends use 68k(R) in BSI and negetive phone will enter test mode now u can put usb cable ....ucan see ur security code in any soft...without test mode it is always shows 12345 as code that is incorrect.

[must be]

plz tell me how i can unlock nokia 6300

[coolmoney]

try flash the phone with jaf and do factory setting with bb5 box.i try this methood, its work 10000000000000000000000000000%

[pitone02]

plz tell me how i can unlock nokia 6300

buy an unlock box, no other way then buy code.