Dubao like I said: No Flash file

[dannyogolo]

SZMI26_05C_DEFAULT_PCB01_GPRS_MT6226_S01.S650S_X86 01_ARB_S0603_XYSLM_V2.BIN

Here is full info from Read detailed information (using v2.02)

COM4 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:7BC1:68F6
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC22E000000000:29EA0000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: EC22E000000000:33A87C00000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #02 in region #00...
flash: EC22E000000000:29EA0000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #03 in region #00...
flash: EC22E000000000:33A87C00000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC22E000000000:29EA0000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: EC22E000000000:33A87C00000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #02 in region #00...
flash: EC22E000000000:29EA0000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 02/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #0...
detect device identification finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
security area backup saved: id.9B9D1EA0.[SZMI26_05C_DEFAULT_PCB01_GPRS_MT6226_S01.S650S_X86 01_ARB_S0603_XYSLM_V2.BIN_2AC5BDE3].rpl
New firmware detected:
SZMI26_05C_DEFAULT_PCB01_GPRS_MT6226_S01.S650S_X86 01_ARB_S0603_XYSLM_V2.BIN
- make "Repair security (ex. ask/rpl)" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: 9B9D1EA0
protocol ver: 04
ver. sw1: SZMI26_05C_DEFAULT_PCB01_GPRS_MT6226_S01.S650S_X86 01_ARB_S0603_XYSLM_V2.BIN
ver. sw2: S650S.X8601.Arb.S0603.XYSLM.V2
ffs offset/size: 00E00000/00200000
detecting eeprom area in 2 chip(s)...
flash: EC22E000000000:29EA0000000000
checking area[00000000]: 00000000-007FFFFF...
flash: EC22E000000000:33A87C00000000
checking area[00800000]: 00000000-007FFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 01
eeprom area: 00800000:00600000-007FFFFF
detect device identification, method #2...
detection phase #0...
.
warning: optional information not found
detect device identification finished
detecting structure pass 1...
...................
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
..................................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
eeprom element #1 detected ok
file saved: backup_system_log_9B9D1EA0_SZMI26_05C_DEFAULT_PCB0 1_GPRS_MT6226_S01.S650S_X8601_ARB_S0603_XYSLM_V2.B IN_2AC5BDE3_20071127-122456.B0X.bin
Finished, time used: 120 sec
Remove/Install battery now !


Pls advice on flash file to use

BTW,
why cant dubao (N99i) work after format (safe and complete & Change imei) like other phones ???

[InfinitySupport]

Hello,

Why can't work ? Probably because you did not hold phone "Power" button long enouh after format at first power-on, probably because you ignored text in log file with message about "New firmware detected:...", probably other problems exist with software and other flash file must be used.

[dannyogolo]

wow,
I have done countless Chinese phone with infinity, all Ok

Let me answer here pls:
1. After format, I hold power button for long (in some cases, I use DC power supply, and phone boots faster than battery, then i use battery to continue) and they all work OK
2. If softwares says "New Firmware Detected," what do I do ????
3. This is exactly what I want, Can you guide me to "another" Flash file Plssssssssssssssssssssssssssss ????