chinese N77i format ffs succesfuly done

[maheshsaiganesh]

COM1 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:7B09:15F5
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] (or higher) generation
security area#1 Ok
security area backup saved: id.FF796FBC.[ZL32L_THL_PCB01_GPRS_MT6226_S01.ZL32L_THL1_6.BIN_7 7AEE5B9].rpl
identification#1 detection finished
device-id: FF796FBC
identification#1 protocol ver: 04
ver. sw1: ZL32L_THL_PCB01_GPRS_MT6226_S01.ZL32L_THL1_6.BIN
ver. sw2: ZL32L_THL1.6
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [eeprom[ZL32L_THL_PCB01_GPRS_MT6226_S01.ZL32L_THL1_6.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\n77i
flash: EC257E25082501:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: EC257E25082501:29EA0000000000
Write Done
file saved: backup_system_log_FF796FBC_ZL32L_THL_PCB01_GPRS_MT 6226_S01.ZL32L_THL1_6.BIN_77AEE5B9_20071128-144235.B0X.bin
Finished, time used: 266 sec
Remove/Install battery now !

[InfinitySupport]

Thank you for good test report !

[randr]

pls tell me which cable to use for this modal

[randr]

I have chines cable set for infinity and ub but in that n95 slider cable is only works other cables are not detecting phones n95 18 pin pls tell me i have to modify the cables pls or pls give me the nos off cable which is which phones
thanks

[Nasmi]

COM1 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:7B09:15F5
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] (or higher) generation
security area#1 Ok
security area backup saved: id.FF796FBC.[ZL32L_THL_PCB01_GPRS_MT6226_S01.ZL32L_THL1_6.BIN_7 7AEE5B9].rpl
identification#1 detection finished
device-id: FF796FBC
identification#1 protocol ver: 04
ver. sw1: ZL32L_THL_PCB01_GPRS_MT6226_S01.ZL32L_THL1_6.BIN
ver. sw2: ZL32L_THL1.6
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [eeprom[ZL32L_THL_PCB01_GPRS_MT6226_S01.ZL32L_THL1_6.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\n77i
flash: EC257E25082501:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: EC257E25082501:29EA0000000000
Write Done
file saved: backup_system_log_FF796FBC_ZL32L_THL_PCB01_GPRS_MT 6226_S01.ZL32L_THL1_6.BIN_77AEE5B9_20071128-144235.B0X.bin
Finished, time used: 266 sec
Remove/Install battery now !

Hio mates i have also N77 its pinout 6*2 cable please can u give me cable pinout for N77


THANKS
NASMI

[LePilami]

i have one too but 1..........18 conector.
Please poste the right pinout

[.::BHATTI::.]

Post the Pinouts Also there bro ...........................................

[communication_expert]

good for testing and replay thats a nice report and
and this is a pinouts n77 complete collection .
keyboard top
1..........8
3: Rx
4: Tx
5: Gnd
--------------
keyboard top
1.........12
1: Gnd
7: Tx
8: Rx
-------------
keyboard top
connector_2x6
3: Tx
7: Gnd
10: Rx
------------
keyboard top
connector_2x6
4: Rx
5: Tx
6: Gnd
-----------
connector 2x7
13: Gnd
14: Gnd
7: Tx
8: Rx

[brahim12]

can u help me please
i have nokia chinese N77 24 pins like LG8xxx
can u send me pinout
thx

[mus67]

can u help me please
i have nokia chinese N77 2x5 pins
can u send me pinout
thanks

[InfinitySupport]

can u help me please
i have nokia chinese N77 2x5 pins
can u send me pinout
thanks

Due to a lot of different models with the same name but absolutely different hardware (f.e. exist at least 5 phones with name "Chinese Nokia-N95" but different pinouts),
bottom connectors and different pinouts we recommend you to include the next info:
1. detailed description of model
2. phone CPU chip name
3. phone PCB photo (Rx/Tx/Gnd test-points may exist on phone PCB)
4. attach phone photo
5. attach phone bottom connector photo
6. include information about Gnd and Charge pins on phone bottom connector
After you have this information prepared, check the next detailed description how to get pinout for your model:
use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle\
if not helps, please read: http://www.gsmhosting.com/vbb/showpost.php?p=2212036&postcount=7
if not helps, please read: http://www.gsmhosting.com/vbb/showthread.php?t=433447

[hallime2001]

N77 2x5 pin out is 4 rx 5 tx 6 gnd tested by mi 1000/1000 but to writ ime you muste yous mode 2 tested by mi...........keep worken

[mus67]

Thanks Halim2001 for your Help

[elkawasmy]

Thanks for your Help

[brahim12]

what about N77 24 pins like LG8xxxt