eeprom for chinese ztc zt1588 needed

[totalmanish]

in urgent need of eeprom for chinese ztc zt1588 . phone displays bad soft ware flashed phone with flash file no change.. help

[InfinitySupport]

What is original phone firmware version ?

[..:MumbaiGsm:..]

in urgent need of eeprom for chinese ztc zt1588 . phone displays bad soft ware flashed phone with flash file no change.. help

want pinouts of ZT 1588
same problem "BAD SOFTWARE"

help urgent

[InfinitySupport]

What is original phone firmware version ?

[totalmanish]

first the phone showed lights only , theni formeet the phone it showed bad sofware , then i flashed the phone with the following file
ZTC-ZT1588_MOBILEDEN25_06B_PCB01_GPRS_MT6225_S00[1].M608_V_1_12_P1HXM25BC30_CN_16m_En_Cn_w_eeprom.B0M
but still in same condition... if u need any more details show me how to get it..thanks for reply

[InfinitySupport]

Dear Friend,

it's not hard for me to repeat my question 3rd time: What is original phone firmware version ?

p.s.
at 4th time thead will be closed

[totalmanish]

detailed information
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6225:8A03:8A00]...
chip: 0001:8303:0005
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] (or higher) generation
identification#1 protocol ver: 04
ver. sw1: MOBILEDEN25_06B_PCB01_GPRS_MT6225_S00.M608_V_1_12_ P1HXM25BC30_CN.BIN
ver. sw2: M608_V_1.12_P1HxM25BC30_CN
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom area in 1 chip(s)...
flash: 2088C4FFFFFFFF:2088C400000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
detecting structure pass 1...
......................
detect standard fat location pass #1...
.................................................. .....
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
eeprom element #1 detected ok
Finished, time used: 28 sec
Remove/Install battery now !
thanks.....

[InfinitySupport]

Dear Friend,

As I can see, you simply read info from your phone but don't checked operation.log file to find original phone software version.
Why I think so ? Just complar your last log with file name that you have used for flashing.

So, I must repeat my question 4th time: What is original phone firmware version ?

And, as promised here http://www.gsmhosting.com/vbb/showpost.php?p=2913562&postcount=6 thread closed.

My final advice: read this: http://www.gsmhosting.com/vbb/showthread.php?t=462372