N 92 format ffs suceesfuly

[maheshsaiganesh]

COM1 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:F969:6530
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] (or higher) generation
security area#1 Ok
security area backup saved: id.EC7D4994.[E553_X10PA_E553_GPRS_MT6226_S01.01_1.BIN_4AA6EE70].rpl
identification#1 detection finished
device-id: EC7D4994
identification#1 protocol ver: 04
ver. sw1: E553_X10PA_E553_GPRS_MT6226_S01.01_1.BIN
ver. sw2: E553_X10PA.01.1
ffs offset/size: 00800000/001FF000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [eeprom[E553_X10PA_E553_GPRS_MT6226_S01.01_1.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\n92
flash: EC257E25082501:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: EC257E25082501:29EA0000000000
Write Done
file saved: backup_system_log_EC7D4994_E553_X10PA_E553_GPRS_MT 6226_S01.01_1.BIN_4AA6EE70_20071129-141302.B0X.bin
Finished, time used: 277 sec
Remove/Install battery now !

[InfinitySupport]

Thank you very much for good test report !

[JC_BY]

Please tell me what was pinout for it? My sample has 18 pin standart Samsung connector.

[JC_BY]

So I found correct pinout on forum

same as anycool D66+ 18pin connector

keyboard top
1.........18
1: Gnd
2: Gnd
7: Tx (3 pin rj-45)
9: Rx (2 pin rj-45)
================

COM5 [VCP11] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:6E32:CCE0
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] (or higher) generation
security area#1 Ok
security area backup saved: id.56C13C8D.[E553_X8PAF5C_E553_GPRS_MT6226_S01.V23_01_1.BIN_05E E2D7D].rpl
New firmware detected:
E553_X8PAF5C_E553_GPRS_MT6226_S01.V23_01_1.BIN

- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 56C13C8D
identification#1 protocol ver: 04
ver. sw1: E553_X8PAF5C_E553_GPRS_MT6226_S01.V23_01_1.BIN
ver. sw2: E553_X8PAF5C.V23.01.1
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:2AEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
detecting structure pass 1...
..................
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
..................................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
eeprom element #1 detected ok
file saved: backup_system_log_56C13C8D_E553_X8PAF5C_E553_GPRS_ MT6226_S01.V23_01_1.BIN_05EE2D7D_20071130-005129.B0X.bin
Finished, time used: 146 sec
Remove/Install battery now !
COM5 [VCP11] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:6E32:CCE0
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2AEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] (or higher) generation
security area#1 Ok
security area backup saved: id.56C13C8D.[E553_X8PAF5C_E553_GPRS_MT6226_S01.V23_01_1.BIN_05E E2D7D].rpl
New firmware detected:
E553_X8PAF5C_E553_GPRS_MT6226_S01.V23_01_1.BIN

- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 56C13C8D
identification#1 protocol ver: 04
ver. sw1: E553_X8PAF5C_E553_GPRS_MT6226_S01.V23_01_1.BIN
ver. sw2: E553_X8PAF5C.V23.01.1
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:2AEA0000000000
checking area[00000000]: 00000000-00FFFFFF...

[maheshsaiganesh]

yes your pin out is correct chek battery is fully charged & try again