View Full Version : Dark Flasher Shell 2
Dark Lemming
07-09-2001, 13:47
and finally, as promised, here it is:
v2.0 features:
-support for nk 3210 v5.31 v5.36 v6.00
-support for nk 3310 v3.24 v4.02 v4.06 v4.18 v4.19 v4.23 v4.24 v4.35
-support for nk 3310 from deutch provider telfort v4.06 v4.18 v4.24 v4.35
-support for nk 3330 v3.05 v3.10 v3.12 v4.12
-support for nk 5110 v5.28 v5.29 v5.30
-support for nk 5130 v5.71
-support for nk 6150 v5.22 v5.23
-support for nk 6210 v3.01 v3.04 v3.74 v4.08 v4.27 v4.36 v5.01 v5.02
-support for nk 6210 from deutch provider telfort v3.04
-support for nk 6250 v4.01 v4.04 v4.05
-support for nk 7110 v4.88 v4.94 v5.00 v5.01
-support for nk 8210 v5.08 v5.11 v5.16 v5.20 v5.21 v5.25 v5.26 v5.27
-support for nk 8250 v3.08 v3.12 v3.18
-support for nk 8290 v5.06 v5.07
-support for nk 8850 v5.11 v5.16 v5.20 v5.21 v5.25 v5.26 v5.27
-not needed to use 'C:\' directories
-changed default setting of boot file (now it's 868) - thanx FSC
-changed default setting of starting method (mow it's manual) - thanx FSC
-automatic and manual flasher settings (you only need to press enter twice and power up the phone)
-'flash.out' file handling
-automatic detection for empty 'flash.out' file ( FF00FF00 )
-changed design
-automatic flash loader selection via flash id list
you can download it at:
http://darklemming.da.ru
please report bugz and sh*tz of my new version ('cause it has them, of course!!).
also you can post here your ideas to make the flasher better.
do like the prog? do you hate me? rate me!! :)
have phun
Dark Lemming
Well done. You are the GREATEST. Where are you from by the way.
A definate 5 star award. Come on people at least rate him for his hard work.
Thanks and well done on a good job!
If only you could do select 8210 5.28 from the menu even if you didn't have the partial for it.
Any idea when it will support 8210 5.28? because it has only just been released and it is not up to date.
Dark Lemming
07-09-2001, 14:35
here we go again....
first update:
v2.01
-added support for nk 8210 v5.28
refresh your webpage so you can see the new links
you must download the main zip + 8210 partials zip file
have phun
Dark Lemming
He's portuguese of course.
Remember: portuguese do it better
Hi DL
Was Wondering where you got to, nice work again m8 :cool: :cool: :cool: :cool:
Regards to you & your Family
Charlie
Coolest of them all... ;) ;) ;)
zbomberman
07-09-2001, 15:35
Thanks DL for the new release i hope that it will help us a lot.
coz the first one was so good also i am still using it all the tie now i am going to test the new one.
if there is any bugs i will tell you,
good luck.
Nice piece of work AGAIN. I think a lot of us where wondering where you got to. Bud now we know. GREAT TOOL.
Regards,
Fallen
TheEckoMan
07-09-2001, 16:06
PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL, PORTUGAL !!!
nice work!
Thanks and regards,
Alro
Nice work darklemming :) :) nice to hear from you again. Welcome back :D :D :D
Dark Lemming
07-09-2001, 16:56
guys... i still need 8890 flashing info and partials... if any1 has them, mail me. also looking for 8850 5.28 partial.
Dark Lemming
dark,
... finally, it was worth the wait... your country must be proud of you... :)
:cool: :cool: :cool: :cool: :cool:
Hello people. Problem with Dark Flasher 2 already. Tried to flash a 7110 ver. 5.0. Phone now does not turn on. It flashed from addrss 003B. Can someone please give me the correct partial flash and the start address, as DF2, did not help. Please send the file to ultimate_ski4@hotmail.com, or give me a solution. Thanks
Dark Lemming
07-09-2001, 19:58
new version available for download
v2.02
-fixed nk 7110 start addresses ( 3A where should be 3B and vice-versa )
go get it.
keep bug-reporting
Dark Lemming
Can someone please give me a solution for my problem. Look above.
Pandemonio100
07-09-2001, 20:13
Good work guy. ;)
Dark Lemming
07-09-2001, 20:18
you will need a backup from a 7110 v5.00 from 003A0000 to 003C0000 to solve your dead phone problem
hı dark your program ıs very nıce thanks a looooooot and repeat :welcome tothe forum
kenwood
:) :) :) :) :) :)
Dark Lemming your partial for 6210 v4.08 doesn't unlock the phone :( it doesn't kill the phone but it stays locked.
The maroon partial worked for me :)
I've compare them with the one from maroon and they are diferent.
Best Regards
Dark Lemming
07-09-2001, 22:00
thanx, FSC. 6210 partials pack fixed with maroonlock's 6210 4.08 file. ready for download. keep them coming
Dark Lemming
07-09-2001, 22:03
thanx, FSC. 6210 partials pack fixed with maroonlock's 6210 4.08 file. ready for download. keep them coming
Hello Darklemming,
Glad You're back....
But with the 3310 telfort the start adres are wrong.
The start adres are for the four Telfort files 270.000 (You entered 280.000).
The partials are correct only the start adres is wrong.....
Dark Lemming
07-09-2001, 22:53
another update
v2.03
-fixed nk 3310 telfort start addresses (thanx Magic2ik)
-added separator between 'normal' and 'telfort' flashes
Hello GSM friends. As you all know i now have a dead 7110 ver. 5.00, and due to my problem Dark Flasher2 ver 2.02 was released.
THE PROBLEM:
7110 ver. 5.00 is supposed to have address of 003A. However Dark put it on 003B. Anyone the phone does not turn on.
WHAT I DID:
I then flashed it with 003A. However the phone obviously still does not turn on.
POSSIBLE SOLUTIONS:
Make backup from a 7110 v5.00 from 003A0000 to 003C0000 to solve the dead phone problem.
MY PROBLEM:
I only have a 7110 ver. 4.88.
YOUR HELP:
Please can someone make me this backup from 003A0000 to 003C0000 on 7110 ver. 5.01, or give me another solution.
I have provided alot of help, and am coming to my 100 post on this particular forum. Please please make my 100 post be the post that i have finally fixed the phone.
PLEASE GSM FRIENDS TRY AND FIND ME A 7110 VER. 5.00 AND HELP ME SORT THE PROBLEM OUT.
THANK YOU ALL IN ADVANCED.
LOOK FORWARD TO HEAR FROM YOU.
If the file is over 1MB please send it to ali.nateghi@btinternet.com or alan.nateghi@btinternet.com
If the file is under 1MB please send to my address ultimate_ski4@hotmail.com
look forward to hearing from you all.
:( :( :( :( :( :(
Originally posted by jj008:
<STRONG>POSSIBLE SOLUTIONS:
Make backup from a 7110 v5.00 from 003A0000 to 003C0000 to solve the dead phone problem.
</STRONG>
Hello ,
I've downloaded a full backup off the 7110 v5.00 from the internet.
And took the part 3A0.000 - 3C0.000 from it.
It is from a locked 7110.
Repair the phone with this one and use after You repaired the phone the partial from the darkflashershell.....
7110 500 3A0.000-3C0.000 (http://www.homepages.hetnet.nl/~ankh-/7110500.zip)
-'flash.out' file handling
-automatic detection for empty 'flash.out' file ( FF00FF00 )? How do i make a backup from my phone with the darkshell2 and how do flash.out file handling work?
HH. Thanks alot. Works works perfectly.
I rated you 5.
Thanks to all who helped especially HH.
What an excellent way to celebrate my 100 post.
thanks alot
Originally posted by PeeWee:
<STRONG>-'flash.out' file handling
-automatic detection for empty 'flash.out' file ( FF00FF00 )? How do i make a backup from my phone with the darkshell2 and how do flash.out file handling work?</STRONG>
Set it to manual.
For instant You have a 3210 v6.00.
You select phone type 3210 version 6.00
Klick on flash.
But instead You choose F2 (write), You choose F1 (Read)
Full backup is from 200.000 - 400.000
Partial backup is from 260.000 - 270.000
It's best You first read the partial so You can see the phone ID NO. (Dejan shows it when You want to read the phone).
If You can't read the phone You can select the right flash Id with the Phone ID that the Dejan flasher showed You....
The backup is saved as FLASH.OUT
Rename it as 3210-600.fls and put is in the BACKUP directorie.
So if You click on the backup button You can select it....
Originally posted by jj008:
<STRONG>HH. Thanks alot. Works works perfectly.
I rated you 5.
Thanks to all who helped especially HH.
What an excellent way to celebrate my 100 post.
thanks alot</STRONG>
I'm glad I could help You.
And thanks for rating me...
Till next time...
zbomberman
07-10-2001, 02:20
Hi HH,
i read your posts it was nice from you to for helping each other.
but know its my turn lol :)
can you please tell me if we have a full flash example of 6210 from 002-006 how can i took a part of it from 005A-006?
this is example.
so what i want to know how you do to cut a flash file to multiple part without reading them part by part from the phone?
thanks in advance,
your help is apreciated.
can some kind person please send me the latest update of the dark flasher shell I can't download it from the site. sgnltd@btinternet.com
to cut a paste the the full flash file I think hh wrote it to a phone and read 5A - 5C then wrote a backup he made before hand back to his phone.
TheEckoMan
07-10-2001, 04:44
Ey G-Man !
Check your email! :cool:
Thanks TheEckoMan!
Dark Lemming The correct address for 6210 3.04 telfort flash is 00270000 not 00380000.
What about support for 8850 5.28?
hi how do i get to darklemmings page? i tried clicking on the link and all i get is page not available... maybe i got a wrong link? can anyone post the right link here? thanks...
gsnbhagawan
07-10-2001, 12:14
link is not working
where can i get working link
Dragonlock
07-10-2001, 12:41
Originally posted by G-Man:
<STRONG>Thanks TheEckoMan!
Dark Lemming The correct address for 6210 3.04 telfort flash is 00270000 not 00380000.
What about support for 8850 5.28?</STRONG>
What are u talking about it's correct
38000
Regards,
Dragonlock
Magic2ik
07-10-2001, 12:57
Dragonlock is right
We are talking about a 6210 (not a 3310)
Dark Lemming
07-10-2001, 13:20
alternative URLs for you guys:
http://darklemming.da.ru http://darklemming.xrs.net
Dark Lemming
07-10-2001, 13:31
another update
v2.04
-fixed some flash id and flash loader problems (thanx Charlie)
gsnbhagawan
07-10-2001, 13:38
can not download file http://www.terravista.pt/nazare/2711/dfs203.zip
from http://darklemming.xrs.net/
Regards gsnbhagawan
Dark Lemming
07-10-2001, 14:48
you cannot download it cause the file doesn't exist anymore. it has been replaced with a newer version. try refreshing your browser.
Dark Lemming
zbomberman
07-10-2001, 15:14
Hey HH,
u didn't answer my question
your help is appreciated.
and thansk DL for all ur effort for helping us.
gsnbhagawan
07-10-2001, 15:48
thanks for shell 2.04 and c30 unlocker
Dark Lemming
07-10-2001, 15:54
to zbomberman:
open an hex editor and open your full flash in it.
to get the right address, you must go to "desired address"-00200000"
example if you want to go to 005D0000, in your file your address will be 003D0000 (in hex)
as in your case: you want to take 005A0000 to 00600000, right?
open your file and get from 003A0000 to 00400000
Dark Lemming
Hi ZBomberman,
I just got back from work, so I couldn't reply sooner.
And about Your question, Darklemming has already given the answer...
Hi Dark,
Big TNX for the soft. I gave you a rating of 5 which is simply not enough!! By the way, what's the correct flasher config for 3330, is it 65-05 or 65-08?
Regards,
neb
http://www.cro-web.com/maroon/partials.htm down at the bottom where the telfor flashes are it says that the start address for the 6210 telfort flash file is 00270000.
Originally posted by G-Man:
<STRONG>http://www.cro-web.com/maroon/partials.htm down at the bottom where the telfor flashes are it says that the start address for the 6210 telfort flash file is 00270000.</STRONG>
The start adress for the 6210 telfort flash file is 380.000
Spalato is in error (mistyped I guess)
zbomberman
07-11-2001, 02:19
Thanks guys DL and HH for the reply.
dear HH i wanted to send you email about this metter how to seperate flashes from one file but i didn;t find ur email.
and DL i don;t want to send you email and bother you in my question i know you are busy in ur proggy.
So guys i didn't get what you mean exaclty.
if i have a full flash 6210 from 002-006 how to cut it.
if you don;t want to explain here i will send you email if this don;t bother anyone of you.
thanks in advance.
ur help is appreciated.
Originally posted by zbomberman:
<STRONG>So guys i didn't get what you mean exaclty.
if i have a full flash 6210 from 002-006 how to cut it.
if you don;t want to explain here i will send you email if this don;t bother anyone of you.
thanks in advance.
ur help is appreciated.</STRONG>
Hi ZBomberman,
If You have a backup so as You say from 200.000 - 600.000.
And You want for instant the part 5A0.000 - 5B0.000
Load full backup in a hexeditor.
The editor starts with startadres 0 en the file ends at 400.000 (original file from 200.000 till 600.000)
Then You have to count in Hex.
The difference from 5A0.000 minus 200.000 = 3A0.000
So You select in the hexeditor from 0 a block with the size of 3A0.000 and delete the block.
So the rest is from (original 5A0.000 - 600.000) but it start in the editor with 0 again and ends at 60.000.
The part You want has a size of 10.000 (Hex because 5B0.000-5A0.000 = 10.000)
So You select now a block with the size of 10.000 in hex at the start of the file (then copy the selected block).
Open a new file and paste the block in the new file and save it.
Now You have the part 5A0.000 - 5B0.000
zbomberman
07-12-2001, 01:08
Thanks a lot HH,
i will try tomorrow to work on it and to see how this will work.
and i will post also my messages there,
what do u think of adding a new topic about this, on how to cut part of of flashed from a full flahs etc...
i think a lot of people need this.
anyway thnx a lot.
and for sure thnx DL for working hard and giving ur shell free to the public.
*** be with you.
take care.
TheEckoMan
07-12-2001, 04:59
Ey Dark Lemming !
I think maybe it is time for v2.05 ?
There is a new partial for nokia 3310 v4.45, thanks to KiCK our porcho brother, start add 280000, download it Nk 3310 4.45 (http://www.sysgate.org/~kick/3310_445.fls)
:cool:
<FONT COLOR="#ffff00" SIZE="1">[ 12 July 2001 04:01: Message edited 1 time, lastly by TheEckoMan ]</font>
Dark Lemming
07-12-2001, 13:50
here's the update for u guys:
v2.05
-added support for nk 3310 v4.45
-added support for nk 8850 v5.28
now just one thing: READ THIS :
stop 'just downloading' and contribute with something. i can count with the fingers of one hand, the number of persons who are helping me. so i'll post here a list of needed partials and if you have any, please mail it to me. do a little research. help keeping this project free.
nk 3330 v4.16
nk 6210 v5.17
nk 6250 v5.00
nk 6130 v5.61
nk 5190 v6.11 v6.71
nk 6190 v6.13
nk 8890 v12.06 v12.07 v12.15
come on guys. i know some of you have som of these partials, so please... donate them to the world.
Dark Lemming
"partial file problem"
hi guys
I just started to use DFS204 progy ,(and also copied the partial files in the partial folder) but i kept getting an error message"partial file problem", any idea how to solve this problem?
thanx again and again for this progy from Dl.
You get that because the files are named wrong they should be like this:
3210-531.fls
thanx GMAN
i try to change all the names i post the result latter
thanx again
regards
farry
zbomberman
07-13-2001, 01:06
hey listen i had this problem before look what to do.
when u extract the program in a folder lets say folder darkleming you will get many folders as partial and backup etc...
when u extract the flashes zip file in the folder partial they will creat a new directory called also partial so be aware cut them from the new one and put them on the first partial folder.
did u get what i mean????
if u don;t i will give more explanation.
good luck
bye
hi to all
i try to solve all the flasher shell proplems
by the new (quick antinokia ver3)=
Dark shell ver2+
easy (add/edit) start address+
auto update for any nokia phone+
easy to use your flash.out with out rename it
or move it ..just one click.
also autoflash/maneual option.
comming soon in this days
reg
amtx99
<FONT COLOR="#ffff00" SIZE="1">[ 13 July 2001 23:03: Message edited 2 times, lastly by AMTX99 ]</font>
hi Zb
thanx 4 your help,i think the problem was that i didnt have the partial in my folder which i was clicking on! i think!!
thanx again by the way i was reading the post on backup from HH how do we know which adress to start and finish the backups?(for example 200,000-400,000)
go easy i like to learn i am a beginer!!!
thanx again man
regards
farry
It is a good software, thank you for it.
BUT I have tested it today to full flash 8850 and 3310, and when it is done, the phone is locked. When I try to unlock them, there is no result, and it is still locked.
What can I do? What is the solution??
Thanks again
hi guys
i unlocked a 8210 ver. 5.27 and the phone is fin.
however i have another problem when i click on ver 4.45 for 3310(although i have the 4.45 partial in the partial folder)when i click on the version it is not there!! only upto 4.35!! does anybody know why?
thanx again for your replys.
regards
farry
Take a look at the original Dejan readme.txt file... the flasher shows up to ... fls files... If I understood your problem I think you should use the automatic method and let the flasher get the fls file for you
Hope this helps !
:( :( I dont know why no one answer my qwestion, is it difficult????
but i will answer the last 2 qwestions.
you have to download it again it is updated for 3310 v 4,45
regards
Hello all. Just to say once again to Dark. Well done, on a good job with the prog. Quite a few problems but not many to bring it up to 2.05. Also not that it makes a difference but when you click about it shows ver. 2.01 although it is 2.05, but i doubt anyone really cares.
WELL DONE, KEEP UP THE GOOD WORK.
There are sites which sell the led lotion which turns blue to white and blue to purple for around 50 dollars for 10,000 led changing. However any scientists who know the chemical or where we can get it cheaper.
hi again
thank u guys i will try to download the file again
regards
farry
sorry its me again!!
i have been reading the old posts on hex editor and programming different eepromms etc,however, regretably i dont know how it is been done!! iam sure many newbies on this forum would like to come up one more step!now any body can suggest how and where we can find these information!please?
many regards from everybody
farry
silverfox
07-15-2001, 21:24
:confused: trying to flash 3330 ver3.12
using auto every time i do this i get
loodind boot loader........
boot loader is ready
flash id 00898896
loading flash loader
flash loader is ready
erasing flash
earase flash error!
addr:00000000 in:ff flash:00
any one help
tryed about 20 times keeps doing it any advice ????????????????
catchya
silverfox
Originally posted by silverfox:
<STRONG> :confused: trying to flash 3330 ver3.12
using auto every time i do this i get
loodind boot loader........
boot loader is ready
flash id 00898896
loading flash loader
flash loader is ready
erasing flash
earase flash error!
addr:00000000 in:ff flash:00
any one help
tryed about 20 times keeps doing it any advice ????????????????
catchya
silverfox</STRONG>
wrong floader, try other one
BR
silverfox
07-15-2001, 21:33
:confused: f loader used normal
which do u suggest for 3330
catchya
silverfox
silverfox
07-15-2001, 22:30
yes get in tere whos your daddy go on my son yipee ect.... ect...
done it that 3330 that i have asked so many questions about as been brooken in get in there !!!!!!!!!!!!!!!!!
thanks to all the people that made this pos
chears lads and lases
wright to find a new prob !!!!!!!!!
thanks again for all the help the muckerts on this forum gave me
catchya
silverfox
silverfox
07-15-2001, 22:34
yes get in there whos your daddy go on my son yipee ect.... ect...
done it that 3330 that i have asked so many questions about as been brooken in get in there !!!!!!!!!!!!!!!!!
thanks to all the people that made this pos
chears lads and lases
wright to find a new prob !!!!!!!!!
thanks again for all the help the muckers on this forum gave me
catchya
silverfox