Chinese V12 (CECT-G118+) Firmware needed

[nishaon]

Hi everyboby I badly need Chinese V12 (CECT-G118+) Firmware.
If anyone can, please share it.

Your help is highly appritiated.

With best regards,
Shaon.

[InfinityHelp]

hello!

please post full version name.

[nishaon]

Thanks for your reply. I will post the full version name tomorrow.

[nishaon]

Here is the detailed information:

COM5 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:8A1D:1E24
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: M220_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_20_MP_V6.B IN
ver. sw2: MAUI.05C.W06.20.MP.V6
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
detecting ffs structure pass 1...
...................
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
.................................................. ....
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs element #1 detected ok
Finished, time used: 99 sec
Remove/Install battery now !

[nishaon]

Full detail is posted a long ago, but till now!

Please support us.

[InfinityHelp]

hello!

sorry, noting to advice from our collection.
but may i ask you why you need it? what problem you have with your phone?

[yawarniazi]

Very rare file. Hard to find it. Many users are still waiting for this file long time ago.

If some one have it then please share it here.
I shall be thankful to him.

Best Regards!
yawarniazi