Problem After Formatting FFS

[imran_qasim]

I've One Chinese BlueTooth N97 fone, it was restarting with sim card inside but when i format FFS after that fone doesn't turn on, so i then write backup file which is attached here as well but fone still dead. so i download the file >>> CM_Bluetooth-Slim-CPU1_E553_Y12ARTF_E553_GPRS_MT6226_S01.K789+_01_01 _16m_En_Ru_Fr_Th_Ar.B0M.bin<<<< after that fone power on oOK but white screen and works oOk as well so i again write the backup file but fone again dead not powering oOn i try FORMAT FFS again i try to Repair Security Area everything goes oOK but fone still dead or just white screen.



Take Care
ENJOY

[InfinityHelp]

hello!

what is your phone original software version?
please post here, maybe i advice you some other file to try

also after you formated FFS- did you hold power button long enough? 30-40sec?

[imran_qasim]

here is the detail info of the Fone.

Device: Autodetect 6205-6227,6228 NOR
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data damaged
identification detection finished
device-id: CC1965E5
protocol ver: 04
ver. sw1: E553_Y12ARTF2_E553_GPRS_MT6226_S01.K789+_01_1.BIN
ver. sw2: K789+.E553_Y12ARTF2.01.1
ffs offset/size: 00800000/001FF000
warning: invalid identification, ask/rpl calculation reqired
Probably identification data damaged,
device id: CC1965E5
firmware version:
E553_Y12ARTF2_E553_GPRS_MT6226_S01.K789+_01_1.BIN_ EA051DBC
RPL file must be in folder: C:\Program Files\InfinityBox\ChineseMiracle\
You can create RPL from ASK via client/server right now and press YES.

Do you want to write RPL file now ?
flash: EC257E25082501:29EA0000000000
flash: EC257E25082501:29EA0000000000
Write: rpl
rpl write ok
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
Can't detect eeprom area
Do you want to use standard eeprom address: 00E00000 ?

If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard eeprom address selected by user
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
detection phase #3...
.................................................. ..............
done
detecting structure pass 1...
..............
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
.................................................. .
detect standard fat offset pass #1...
detect standard fat data...
layout detection complete
eeprom element #1 detected ok
Finished, time used: 137 sec
Remove/Install battery now !


Take Care
ENJOY

[InfinityHelp]

hello!

worth to try this one:

flashfiles/ChineseMiracle/ZTC-ZT/ZTC-ZT588_E553_Y12ARTF2_E553_GPRS_MT6226_S01.K789+_01_ 1_16m_Ru_Fr_En_Th_Vn_Cn_Hi_Cn_Ar.B0M.bin

[imran_qasim]

hello!

worth to try this one:

flashfiles/ChineseMiracle/ZTC-ZT/ZTC-ZT588_E553_Y12ARTF2_E553_GPRS_MT6226_S01.K789+_01_ 1_16m_Ru_Fr_En_Th_Vn_Cn_Hi_Cn_Ar.B0M.bin




i flashed the fone with >>>>> ZTC-ZT588_E553_Y12ARTF2_E553_GPRS_MT6226_S01.K789+_01_ 1_16m_Ru_Fr_En_Th_Vn_Cn_Hi_Cn_Ar.B0M.bin <<<<< Phone power on Ok



Take Care
ENJOY