6300 New firmware detected...what is this?

[KUBAT1]

dear infinity team.. I want to change lang in Chines 6300, for that when reading full flash I got this attention.. what to do!? urgent help pls..

COM4 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:7268:ABE8
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:2BEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2BEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:2BEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2BEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 2B0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.B469F93C.[LEDA26_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_48_3 5.BIN_E01544C4].rpl
New firmware detected:
LEDA26_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_48_3 5.BIN

- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: B469F93C
identification#1 protocol ver: 05
ver. sw1: LEDA26_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_48_3 5.BIN

[KUBAT1]

when I read full flash I got these...


ver. sw2: MAUI.06A.W06.48.35
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:2BEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
detecting languages...
.........................................
language parameters detected
detected languages: En Ru Fr Es De Th Tr Pt Ar
reading [flash[LEDA26_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_48_3 5.BIN]]...
warning: wrong data size at 0x008E9000, retry...
read error recovered
warning: wrong data size at 0x009B1400, retry...
read error recovered

[InfinitySupport]

@KUBAT1
What is the reason to post text here if you did not read it ?
Please, tell make what is not so clear in this text:

- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)

If you still can't understand what to do:
Please, read flash from phone and send 2 files "backup flash..." and "backup_system_log..." to InfinityBoxSupport@gmail.com

Regarding your 2nd post:

warning: wrong data size at 0x009B1400, retry...
read error recovered

What is not clear here ?
Software tried to read flash, detected error during reading and repair error.

Please, next time read text in log file before post it here !

[KUBAT1]

mate why do you angry here I can not understand..
this is the first step for us to change lang with infinity lang editor.. and when I read flash there was many error.. for unexpected mistakes I just shared with you and want some info from you if is that a normal case or not?

now here is the question:
I read the flash for that 6300 as you can see.. and infinity box alert me as this firmware is new.. if I use infinity lang editor for that flash file and reupload to phone will be there any problem or not..

thank you for your patience..
regards..

[InfinitySupport]

Hello,

I am not angry, I just cant understand why it's not possible to read text in log window before post it here.

What you can do now:
If you need to install language only in one your phone you can make this:
1. read flash from phone
2. edit firmware file with Language Editor
3. write this edited file in phone back
phone will be alive and working, because if you read flash from your phone and write the same (with edited language too) flash back you will get working phone.
But if you want to write this edited firmare in ANOTHER phone you must send me required files, wait next update and then you will be able to write this new firmare in another phones too.

[KUBAT1]

thank you very much mate.. you mean if I reaupload edited flash to the phone back no problem but to another phone I live problems.. understand!

after I edited the flash I will reread from phone and send you to use the flash file for others....

btw.. actually I want to add Turkish to the phone..indeed there is Turkish inside. but it is a very bad translation. :)

thank you very much...

[KUBAT1]

sorry infinity team here is a question,
if I backup EEPROM of another phone of same HW 6300 and upload this edited flash as firmware and restore again its eprom will this demage the phone? will phone work properly or not?

regards.

[InfinitySupport]

Hello,

if firmware is supported by Infinity-Box software you can do so, if software say that firmware is new - you can't do so and you need to wait update.