Bluetooth Model A:18 Pinout Requried

[mobile_mania]

HI INFINITY BOX I HAW GOT SET BLUETOOTH MODEL A:18 FOR FORMAT FFS. THE CPU INSIDE IS MT6226 CONECTOR IS 1#12 . SIR I WAN RX TX ANG GROUND FOR THE SET NOTHING IS GIVEN INSIDE . ON THE FRONT SIDE SOLDERING POINTS ARE GINVEN 1#16 plz help.

[InfinitySupport]

Due to a lot of different models with the same name but absolutely different hardware (f.e. exist at least 5 phones with name "Chinese Nokia-N95" but different pinouts),
bottom connectors and different pinouts we recommend you to include the next info:
1. detailed description of model
2. phone CPU chip name
3. phone PCB photo (Rx/Tx/Gnd test-points may exist on phone PCB)
4. attach phone photo
5. attach phone bottom connector photo
6. include information about Gnd and Charge pins on phone bottom connector

After you have this information prepared, check the next detailed description how to get pinout for your model:
use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle\
if not helps, please read: http://www.gsmhosting.com/vbb/showpost.php?p=2212036&postcount=7
if not helps, please read: http://www.gsmhosting.com/vbb/showthread.php?t=433447

[InfinityHelp]

hello!

also, you can try following method of searching pinout:
http://www.gsmhosting.com/vbb/attachment.php?attachmentid=118297&d=1187384324

our costumers reported it very easy and fast method for searching pinout on unknown models