mpeg4 cect t689

[eureka8888]

COM1 [Serial0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:9A41:3588
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
error: error# 000000C7
error: wrong answer[C7]: wrong answer after chip id request
flash: AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 Ok
security area backup saved: id.F5FE7BF2.[E550_A5BT_E550_GPRS_MT6226_S01.PCBV3_0_01_4.BIN_CE B72D67].rpl
identification#1 detection finished
device-id: F5FE7BF2
identification#1 protocol ver: 04
ver. sw1: E550_A5BT_E550_GPRS_MT6226_S01.PCBV3_0_01_4.BIN
ver. sw2: E550_A5BT.PCBV3_0.01.4
ffs offset/size: 00800000/001FF000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00800000
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
Detected eeprom/ffs address is non-standard: 00E00000

Posible reasons:
1. eeprom is Ok but address is non-standard
2. eeprom damaged and can't be detected
3. eeprom is Ok but detected incorrectly (f.e. unknown eeprom structure)

If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make flash backup for emergency case
3. repeat required operation

Are you sure that detected eeprom address is correct ?
Do you want to use standard eeprom address: 00800000 ?

If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
operation terminated by user
error: critical error#1 during ffs size detection
error: can't detect eeprom/ffs address/size
error: autodetection failed
file saved: backup_system_log_F5FE7BF2_E550_A5BT_E550_GPRS_MT6 226_S01.PCBV3_0_01_4.BIN_CEB72D67_20080105-084905.B0X.bin
Finished, time used: 47 sec
Remove/Install battery now !

what options should i choose? phone is mpeg4 2 sim cect t689

[InfinityHelp]

hello!

make full backup and try to use standart address

[eureka8888]

thanks, will formatting be able to repair the phone...the phone problem is it is not able to detect sim A if two sims are inserted. thanks

[InfinityHelp]

hello!

formating FFS helping in most cases. If you made backup= nothing to worry,
just try it