China Windows Mobile Showing Bad Software

[e_motion_bbsr]

today i got a phone only writen BLUE T00TH


THAT MOBILE ONLY SHOWS WINDOWS MOBILE THEN BAD SOFTWARE

I HAVE READED READ FLASH THEN FORMAT FFS COMPLITE

SAME PROBLEM

HERE IS LOG

CAN ANYONE GUIDE ME

COM4 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6225:8A03:8A00]...
chip: 0001:6403:0004
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: MOBILEDEN25_06B_PCB01_GPRS_MT6225_S00.M608_V_1_11_ P1HXM25BC30_CN.BIN
ver. sw2: M608_V_1.11_P1HxM25BC30_CN
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 2088C4FFFFFFFF:2088C400000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
reading [eeprom[MOBILEDEN25_06B_PCB01_GPRS_MT6225_S00.M608_V_1_11_ P1HXM25BC30_CN.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[MOBILEDEN25_06B_PCB01_GPRS_MT6225_S00.M608_V_1_11_ P1HXM25BC30_CN.BIN]_20080105-150730.B0E.bin
flash: 2088C4FFFFFFFF:2088C400000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 2088C4FFFFFFFF:2088C400000000
Write Done
Finished, time used: 248 sec
Remove/Install battery now !

[InfinityHelp]

hello!

if format is not helpful- try to find same version of support or read out from working mobile
then flash to your faulty phone

[e_motion_bbsr]

i have no same verson phone. can u please tell which file will support to this phone. thanks for reply

[InfinityHelp]

hello!

make full backup and try this file:
flashfiles/ChineseMiracle/ZTC-ZT/ZTC-ZT1588_MOBILEDEN25_06B_PCB01_GPRS_MT6225_S00.M608_ V_1_12_P1HXM25BC30_CN_16m_En_Cn_w_eeprom.B0M.bin

[e_motion_bbsr]

hello!

make full backup and try this file:
flashfiles/ChineseMiracle/ZTC-ZT/ZTC-ZT1588_MOBILEDEN25_06B_PCB01_GPRS_MT6225_S00.M608_ V_1_12_P1HXM25BC30_CN_16m_En_Cn_w_eeprom.B0M.bin


BEFORE IT WAS SHOWING WINDOWS MOBILE THEN BAD SOFTWARE

AFTER FLASH THIS FLASH FILE IT IS SHOWING ZTC THEN BAD SOFTWARE

WAITING FOR REPLY

[sagtel]

@ infinityhelp
same problem
bro..... e_motion_bbsr also same problem
plz give solution
i have 5 pic same problem

[e_motion_bbsr]

still waiting for solution


can i folow this link phone is looking like same

http://gsmhosting.com/vbb/showthread.php?t=462372

[e_motion_bbsr]

tryed lots of flash file same problem
infinity team please help me

[e_motion_bbsr]

Hello Sir Infinityhelp,where R U ??anybody Here To Help Me

[InfinityHelp]

hello!

try to find same as yours version phone to read out good , working dump.
then we can make some more tests

[e_motion_bbsr]

i have downloaded
CM_LV918_MOBILEDEN25_06B_PCB01_GPRS_MT6225_S00.M60 8_V_1_11_P1HXM25BC30_CN_16m_En_Cn_w_eeprom.B0M
and flashed the phone

same problem
showing bad software

here is log

COM4 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
chip: 0001:6403:0004
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
460800
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
detecting chip #01 in region #00...
flash: 2088C4FFFFFFFF:2088C400000000
flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: MOBILEDEN25_06B_PCB01_GPRS_MT6225_S00.M608_V_1_11_ P1HXM25BC30_CN.BIN
ver. sw2: M608_V_1.11_P1HxM25BC30_CN, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 2088C4FFFFFFFF:2088C400000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
reading [eeprom[MOBILEDEN25_06B_PCB01_GPRS_MT6225_S00.M608_V_1_11_ P1HXM25BC30_CN.BIN]]...
file saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[MOBILEDEN25_06B_PCB01_GPRS_MT6225_S00.M608_V_1_11_ P1HXM25BC30_CN.BIN]_20080216-100946.B0E.bin
flash: 2088C4FFFFFFFF:2088C400000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
Area: Firmware
flash: 2088C4FFFFFFFF:2088C400000000
Write: Firmware
Write Done
Finished, time used: 689 sec
Remove/Install battery now !

[InfinityHelp]

hello!

check this tread, there is some solutions for your problem.
worth to try them
http://www.gsmhosting.com/vbb/showthread.php?t=462372