View Full Version : Request pinout for n77 - 2sim
468492DF
01-08-2008, 06:12
need tx1 rx1 tx2 rx2 pinout for nokia n77 - 2sim
connector is 2 x 5
foxthemene
01-08-2008, 10:15
plz just add the phone photo so i can help you
cuz i got the pinout but i need to be shure
468492DF
01-09-2008, 04:24
the connector is 2 x 5
1 *** 5
6 *** 10
InfinitySupport
01-10-2008, 00:34
Due to a lot of different models with the same name but absolutely different hardware (f.e. exist at least 5 phones with name "Chinese Nokia-N95" but different pinouts),
bottom connectors and different pinouts we recommend you to include the next info:
1. detailed description of model
2. phone CPU chip name
3. phone PCB photo (Rx/Tx/Gnd test-points may exist on phone PCB)
4. attach phone photo
5. attach phone bottom connector photo
6. include information about Gnd and Charge pins on phone bottom connector
After you have this information prepared, check the next detailed description how to get pinout for your model:
use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle\
if not helps, please read: http://www.gsmhosting.com/vbb/showpost.php?p=2212036&postcount=7
if not helps, please read: http://www.gsmhosting.com/vbb/showthread.php?t=433447
foxthemene
01-10-2008, 01:54
u ned to open the phone
u will find three pins under the connector
i will send u the pictures as soon as possible
Remove mylar pad connector... u will find GND, RX, TX test points..
this *** pinout for n77 2sim
12345
-----
-----
6
6gnd
4tx
5rx ok
IkaMazini
09-29-2008, 14:16
this *** pinout for n77 2sim
12345
-----
-----
6
6gnd
4tx
5rx ok
yes, tested and working with UniCables, but PinFinder not found pins