what is the right settings in INI file of learning mode??

[ryumahon]

since the time i install it.. i never edited it... DO I HAVE TO???


because this is the FIFTH UNIT that i got that cannot be unlocked by LEARNING MODE... always no important data found.... and if it will display IMPORTANT SP DATA FOUND.. still it failed in unlocking....


phones failed with learning mode


6126
6280
e65
and just now
with
6085 4.26 failed....



please guide me.... maybe there is something wrong with my settings...



br

[X-Shadow]

IMPORTANT SP DATA FOUND <--- means TP is not good if you see this in all attempts of
Learning Mode.

Settings:

[Instance]
TRY=4
repetition=3
Jump=false


for 1.17 , you can already use:

[Instance]
TRY=4
repetition=1
Jump=true



Explanation:
TRY <-- depth of attempts
repetition <-- number of repetead attempts for depth
Jump <-- skips invalid instances

TRY x repetition x 2 x number of entries in Auto Unlocker.ini = Total number of attempts

so TRY 4 x repetition 3 x 2 x 2 = 48 attempts for Learning Mode

If you get 48 "IMPORTANT SP DATA FOUND"... it means bad TP


Best Regards,
X-Shadow

[ryumahon]

again sir.. i know im not that good in hardware.. but i will be the WORST EVER if i cant point the right TESTPOINT WITH 6085, 6126 and others with similar TP....

i have done alot of bb5 already.. so basically its impossible that there is something wrong with my testpoint skill.....



again... after failure of unlocking with learning mode... i tried it with other box with ONE TRY.. its DONE!!...


please do something about this..... im getting dissapointed with it already...

[X-Shadow]

@ryumahon

Be more specific like possibly stating the firmware versions.
Other people can do learning mode with the same phones you
have mentioned. All the triggers from our bb5.ini came from
learning mode. SO it would be quite impossible for us to generate
entries in the bb5.ini IF learning mode was not working.

If you want,, we can send a guy over to your shop and do an
actual demonstration. Or we can make the triggers for your
specific phone requests.

So you never unlocked 1 BB5 phone using our Box???

B.R.
X-Shadow

[ryumahon]

sir to be clear i have unlocked just nearly 10 units of the advanced box... however all of it was not via LEARNING MODE.... i have to flash it with supported version so that it can be unlocked...


what im trying to say is... ONLY IN LEARNING MODE my box cannot unlock... NOT EVEN ONE.... but these phone that failed in unlocking with LEARNING MODE, after flashing it with SUPPORTED VERSION after just ONE TRY the phone is UNLOCKED....


now does this mean i have problem with my TESTPOINTS??



to be specific... ok


6126 4.25 failed in learning mode.. but after flashing it with supported version ( unlocked with same box )

6288 3.70 failed in learning mode.. then during that same day.. LEMOR unlocked his 3.70 via learning MODE... ( but i flashed the phone with supported version, then i unlocked it 1 try only )

E65 just last tuesday i forgot the version ( but it is supported by other box so i unlocked it using the other box, i tried it first with ADVANCED BUT still no luck )

n73 also forgot the version.... failed during learning mode but unlocked with other box...




i dont think sir that you need a guy to come over my shop for actual demonstration.... i just want to know if there is something wrong with my settings???? do i really need to adjust settings for it to function???? and im pretty sure that its not my testpoint skill that has a problem....


if my box can unlock the supported version... then why is it that it cannot unlock unsupported version via learning mode???

[lemor]

hi CLICK HERE (http://www.roundcircle.com.ph/forum/showpost.php?p=6111&postcount=1)newbie can unlock E65 with v1.0615.25 i think your main problem is static..Because thats my problem too in my OFFICE A 95% of STATIC..

also here (http://www.roundcircle.com.ph/forum/showthread.php?t=1048) read page 2 and 3..

regards

[X-Shadow]

His problem is Learning Mode, not direct unlock...

In Learning Mode, if TP get some static, it can easily disrupt normal
operations.

I think you can try to put the phone PCB on a mouse pad (rubber or foam type).
Then really avoid touching the metallic part of your TP before and during Learning
Mode. We can also send you some beta software that will try to filter the readings
with possible "static". However, it will take a much longer time in Learning Mode
as compared to the 1.17...

I think if we can solve your problem, then we could easily solve other people's
problems in the future.

So thank you for testing with us.

I think it is not your TP skills as well. ;-)

Also, that guy who unlocked E65 in 1 try unlocked the phone in the first
attempt of the software (1/5). Which means he probably has a good
working environment with less static, unlike lemor's table that can
easily power up a light bulb due to excessive static!! (just kidding)...


B.R.
X-Shadow

[ryumahon]

this link that you are giving me sir lemor cant help....


yeah.. ok fine.. so youre trying to say that he can unlock it and i cant?? and considering that he is just a newbie and he managed to unlock it??? is that it?? what are you trying to imply??..... with the link you posted here with e65 logs unlocked.. it is the same version that i got.. and he unlocked it without learning mode... and mine was in learning mode and i dont have the unlock triggers yet...thats why i wasnt able to unlock it.. coz if it is only supported with my ini files for sure i had used the advanced box for unlocking it...


oh btw i also unlocked it but using different box.. coz i always failed in unlocking each time i unlock with learning mode...


thats why i created this thread....


what is the right settings so that i can do it with learning mode... this i wont deny.. IM STUPID regarding INI or blah blah blah with programming.. i really dont have idea.. thats why im asking....


im just wondering that why is it that others can do it without altering the ini files... and why cant i????



could it be static problem??... coz if its static problem then maybe i wasnt able to unlock the phone with other boxes too...




again.. i need help regarding learning mode.... and the link that you are giving me is useless for my queries..



br

[lemor]

open your autounlock.ini
make it like this

[Instance]
TRY=4
repetition=3
Jump=false

- if your tp is connected even it is not connected you must discconect your box and connect it again
- IF YOU FAILED in first trial you must try it again sometimes it happened
- IF YOUR PHONE is not supported you can contact us personally (you know how)
- IF not post your problem here and just wait for the update..


regards

[X-Shadow]

@lemor
Please send him the latest ini files (bb5.ini and Auto Unlocker.ini).

The settings in the ini file for Learning Mode is just for adjusting the
number of attempts. Logically, more attempts = more chances of success.
If you suspect you have some static problem, then you need more attempts.
If you think you have no static problem, then you require less attempts.

If you still have problems, don't hesitate to request for one of us to go to your
shop and probably give you a new box and TP replacement. At the same time,
we can bring one of our test phone and try to make Learning Mode using your
current setup.

As of now, we have established that the problem is not the human user, so it
could very well be the machine.


B.R.

[ryumahon]

thank you so much for the time and attention regarding my problem... i trully admire the support that you are giving... now im gonna try unlocking with the N92.... ill give feedback later on..



br

[Bigbrothers2000]

About ini problem i have a question,

yesterday the same E65 same version i had in my hands,

when i start 1.17 and want to unlock the soft says i can not find this version in the ini settings,
but when i start 1,15 there is no problem , it find the settings and want to unlock and ask TP´s


same problem with n73 n95 versions that is supported already , version 1,17 can not find it but version 1.15 advance can unlock it , why?


have i same wrong settings

best regards

[X-Shadow]

@BigBrother

1.15 and 1.17 have different format for bb5.ini files...

You need to make a new folder and install 1.17 files there including the
new bb5.ini for 1.17 which is included in the installer found in the support
section.

If you have login problems,, please tell me your username and I will PM
you your password.

Best Regards,
X-Shadow

[Bigbrothers2000]

Ok i deleted old files 1, 15 advance.exe bb5.ini and autounlocker.ini

and put there new 1,17 and his ini´s
that is fine i think,

and what i read above, if by learning mode soft says IMPORTANT SP DATA FOUND,
that means then that the testpoints are wrong connected ?
must it says not found ??
br

[X-Shadow]

@BigBrother

Thanks for correcting me... ;-)

I meant "Importand SP Data NOT Found..."

Best Regards,
X-Shadow

[rakishi]

Sir x shadow,
Same here problem for a N73 unit as bigbrother scenario!
We have to return to 1.15 so the unit can be unlocked and support the firmware while 1.17 says " Not supported" and testpoint connected while actual its not...

[X-Shadow]

@rakishi

***.ini for 1.15 is not compatible with 1.17,,, that is why firmware not supported.
You need 1.17 version of ***.ini files and install 1.17 in another directory which is
not the same directory as where you put your 1.15.exe

Best Regards,
X-Shadow

[CPUKILLER]

@rakishi

***.ini for 1.15 is not compatible with 1.17,,, that is why firmware not supported.
You need 1.17 version of ***.ini files and install 1.17 in another directory which is
not the same directory as where you put your 1.15.exe

Best Regards,
X-Shadow

so what we need here is the ini settings from supporters to be distributed---regards-cpukiller