PDA

View Full Version : Alcatel BE1 no network after flashing

roller
07-14-2002, 17:10
Hello All
I have problem with telephone Alcatel BE1E-1JTMPT1 16F DGK1T.
It work's fine before I decided to change language (it doesn't have English). I flashed it by well-known and great program's pack 16b/16a and I couldn't find compatable flash. It doesn't see network. I don't understand how it is possible.
Please help me with any solution or advice.

I thought it has other hardware schematic and disassembled phone but I didn't find any difference. I thought it is possible in case of using other kind of syntezitor.

Thank you in advance
patrynio
07-14-2002, 18:35
Use Mihnea soft and flash it, try all flashes for 16A and 16B. It must help!
roller
07-14-2002, 22:14
Where is this soft ?
I tried to flash all flashes (16a and 16b) 3 times !
Thank you in advance
dimka
07-14-2002, 22:25
I saw repair flashes 16a & 16b on http://www.chavalgsm.com/
roller
07-14-2002, 23:06
I have repair (16a & 16b), but it didn't help
I see it first time.
patrynio
07-15-2002, 01:41
If it can't find network after flashing than it has to be software related problem.But maybe the problem also existed before flashing. If you want mihnea soft just send me an email ( telemark@hot.pl ).
Danchik
07-15-2002, 04:24
100001 % Software problem !
Use Correct Flash (you can't upgrade or downgrade) For Correct Flash Chip (atmel, Fujitsu.....)

If you need some flashes i have some.... mail me
mr_x4you
07-15-2002, 04:51
I have the same problem ! I have a 16F with software problem, but had signal, and I want to repair it by Mihnea software ! But flashing all flashes didn't help at all ! No signal with all flashes ! I've tried to prepaire some flashes by myself by changing serial inside of flash, but no luck ! No signal !!!!!!!!!!!!!! I think there is something in those 16F phones !
joe locks
07-16-2002, 03:46
can anyone show a step by step procedure to use this software
roller
07-16-2002, 04:26
As for using this soft (16a/b) it's very easy:
1. Insert SIM-card into telephone and connect to interface
2. Run 16b.bat and wait for end of flashing
3. Power on phone and test it. If failed go farther
4. Power off phone
5. Press Enter to flash others packs.
6. Go to i.3