new version detected

[bifout]

Hi, i have a china phone that is named nokia 6300, the phone is dead i want to revive it, and i found this new firmware that is not supported yet by infinity
so i send this information to you
phone is nokia 6300
in ticket is writing :
nokia corporation
FCC ID : PPIRM-217
IC:661U-RM217
TYPE:RM217
MODEL:6300
MADE IN NOKIA

I already readed the detailed information :

COM23 [VCP6] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: repair security area
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
chip: 0031:FAC1:AA02
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:2BEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2BEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:2BEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2BEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
total flash region size: 02000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program
Files\InfinityBox\ChineseMiracle\backup_security\i d.F1F573A4.
[LEDA26_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_48_3 0.BIN_578C9B92].rpl
New firmware detected:
LEDA26_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_48_3 0.BIN
- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: F1F573A4
identification#1 protocol ver: 05
ver. sw1: LEDA26_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_48_3 0.BIN
ver. sw2: MAUI.06A.W06.48.30
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
file saved: C:\Program
Files\InfinityBox\ChineseMiracle\backup_system_log _F1F573A4_LEDA26_06A_PCB01_GPRS_MT6226_S01
.MAUI_06A_W06_48_30.BIN_578C9B92_20080122-203955.B0X.bin
Finished, time used: 211 sec
Remove/Install battery now !


general information :


COM23 [VCP6] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
chip: 0031:FAC1:AA02
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:2BEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2BEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:2BEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2BEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 2B0000EA18F0000018F0970018F09F0018F09F0018F09F00
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.F1F573A4.[LEDA26_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_48_3 0.BIN_578C9B92].rpl
New firmware detected:
LEDA26_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_48_3 0.BIN
- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: F1F573A4
identification#1 protocol ver: 05
ver. sw1: LEDA26_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_48_3 0.BIN
ver. sw2: MAUI.06A.W06.48.30
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:2BEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00000000
Detected eeprom/ffs address is non-standard: 00000000
Posible reasons:
1. eeprom is Ok but address is non-standard
2. eeprom damaged and can't be detected
3. eeprom is Ok but detected incorrectly (f.e. unknown eeprom structure)
If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make flash backup for emergency case
3. repeat required operation
Are you sure that detected eeprom address is correct ?
autodetected eeprom/ffs address[00000000] confirmed by user
error: critical error#1 during ffs size detection
error: can't detect eeprom/ffs address/size
error: chip layout not detected
error: chip layout not detected
error: autodetection failed
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _F1F573A4_LEDA26_06A_PCB01_GPRS_MT6226_S01.MAUI_06 A_W06_48_30.BIN_578C9B92_20080122-210115.B0X.bin
Finished, time used: 105 sec
Remove/Install battery now !



here is the flash readed from phone

http://rapidshare.com/files/85993910/backup_flash_LEDA26_06A_PCB01_GPRS_MT6226_S01.MAUI _06A_W06_48_30.BIN__20080122-212633.B0M.rar.html

[InfinityHelp]

hello!

did you repaired phone by formating FFS?
if not- we can not use your file, it is probably damaged
please reply here

[bifout]

i can't repair it, the soft tell me that this is a newer version of flash, and repair can't be done, with format FFS, and in repair security area

i have always this message

New firmware detected:
LEDA26_06A_PCB01_GPRS_MT6226_S01.MAUI_06A_W06_48_3 0.BIN
- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)

i think that file is damaged too, but i haven't other phone that work perfect to read flash from it, so i do my best

[InfinityHelp]

hello!

make complete format, it must work even on unknown firmware.
and post here if this repeaired your phone

[bifout]

i have allways same probleme, it gaves me, new firmware detected
and the phone can't be repaired

i tested many operation but without success, so i give it to the customer

thanx for help :)