View Full Version : one touch easy hf
can anbody tell what soft and how to unlock the old one touch easy hf....
Originally posted by hikaru
can anbody tell what soft and how to unlock the old one touch easy hf....
Hi man!
Please tell us if it's HE1 or HD1, on what network was blocked, and your imei,also u must type *#06# and tell the version that apear after imei. Can be easy if is old version till v2.03.
My best regards to all
cosmo
masterross
07-16-2002, 01:24
one touch easy hf is HE1
phone is he1 netowrk locked to 505-03 (aus vodafone)
have quite a few hansets to do so would like soft
regards
Hi!
So what u must use is retrofit for HE1 phones(u can find it on afilip site),and before u do something u must check the version and after that:
1. EXTRACT all files in ROOT directory of drive C:
You will get 4 new drectories
2. Copy the dll files you find in RETROFITFTPV706EXE to WINDOWSSYSTEM
directory
3. Insert this in your win.ini file
[CVIRT4]
CVIRT4=C:CVICVIRT4.EXE
4. Start the application LGTHD1R2.EXE in the directory from point2
The program must start. Configure from option menu the language English,
from the first menu from left the com port
Connect the phone switched off.
Also from first menu choose SWITCH ON and then CONECTING.
Don't care if you get some error messages on some phones.
Use the EEPROM READ/WITE by KEYBOARD commands you find to chage locations:
-------HD version--------
V11 177 + 178 on 00 - OK
V12 177 + 178 on 00 - OK
V14 176 + 177 on FF - not tested!!!
V15 176 + 177 on FF - OK
V16 176 + 177 on FF - OK
-------HE version ---------------
V201 176 + 177 on 00 - OK
V202 176 + 177 on FF - OK
V203 176 + 177 on FF - OK
V247 00C - 00E on 00 - OK
V250 00C + 00D on 00 - OK
V251 00C + 00D on FFor 00 - not functionaly for100% phones!! ( 100% solutions = flash with functionaly dump )
My best regards to all!
messenger:cosmin44@yahoo.com
cosmo
just to make life difficult software is v300
masterross
07-17-2002, 22:40
Run retrofit (ftpact4.exe)
In menu Opt -> Language select english
In menu General -> Link Configuration -> MCX Channel Number" select
com port, then "Switch On" and "Connect" If the phone is connected
the display is blank.
Make a backup of all memories in the phone.
Run Retrofit 4.23: Menu Flash/Eeprom -> Flash Access and press
Ctrl+Enter. Then change option "Zone" to "Parametre 2"
and target file name to "flash2.s3" and again Ctrl+Enter.
Using the same metod with menu Eeprom Access make a backup of eeprom
Now unlocking:
Flash/Eeprom -> Sim-me-lock -> reading. password 0000000 and Ctrl+Enter.
then press OK and Ctrl+Enter.
You should get file c:
esuhe1r2simlock.dat.
In this file will be operator code for which is phone locked, delete
this code, so the file will be empty.
Then:
Flash/Eeprom -> Sim-me-lock -> writing, password 0000000 and
Ctrl+Enter. if will be in B zone N category
set to ON, change it to OFF. and press Ctrl-enter.
The phone will be unlocked.
doesn't it make you miss the good old point and click programs..