FLASH N77 Error

[Asiang-Com]

error but succes backup
Hp only change language

COM9 [Serial2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:74C1:584A
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 2B0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.81F193EC.[TYM072641_611_PCB01_GPRS_MT6226_S01.072641_611_V12 21.BIN_35D81983].rpl
New firmware detected:
TYM072641_611_PCB01_GPRS_MT6226_S01.072641_611_V12 21.BIN

- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 81F193EC
identification#1 protocol ver: 05
ver. sw1: TYM072641_611_PCB01_GPRS_MT6226_S01.072641_611_V12 21.BIN
ver. sw2: 072641_611_V1221
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:2BEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
reading [flash[TYM072641_611_PCB01_GPRS_MT6226_S01.072641_611_V12 21.BIN]]...
warning: wrong data size at 0x00315C00, retry...
warning: wrong cs at 0x00315C00, retry...
read error recovered
warning: wrong data size at 0x0098C400, retry...
warning: wrong cs at 0x0098C400, retry...
read error recovered
file saved: C:\Documents and Settings\Asiang\Desktop\backup n77 eror\backup_flash[TYM072641_611_PCB01_GPRS_MT6226_S01.072641_611_V12 21.BIN]_20080124-084312.B0M.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _81F193EC_TYM072641_611_PCB01_GPRS_MT6226_S01.0726 41_611_V1221.BIN_35D81983_20080124-084416.B0X.bin
Finished, time used: 1712 sec
Remove/Install battery now !

[Asiang-Com]

want to change language at LangPackEdit

[InfinitySupport]

want to change language at LangPackEdit

Hello,

What was file/firmware name that you have loaded into software ?

[Asiang-Com]

Hello,

What was file/firmware name that you have loaded into software ?


only want backup proses


any 1 5610 chineses want backup,error too.
i using cm v 2.21

can help me.
please
urgent
only want change language

COM9 [Serial2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
chip: 0031:B941:9514
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: FIREFLY_PCB02_GPRS_MT6226_S01.05C_W06_12_818_NEWLC D_V018.BIN
ver. sw2: 05C.W06.12.818.NEWLCD.V018
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
reading [flash[FIREFLY_PCB02_GPRS_MT6226_S01.05C_W06_12_818_NEWLC D_V018.BIN]]...
warning: wrong cs at 0x00005C00, retry...
warning: wrong cs at 0x00005C00, retry...
warning: wrong cs at 0x00005C00, retry...
warning: wrong cs at 0x00005C00, retry...
warning: wrong cs at 0x00005C00, retry...
warning: wrong cs at 0x00005C00, retry...
warning: wrong cs at 0x00005C00, retry...
warning: wrong cs at 0x00005C00, retry...
warning: wrong cs at 0x00005C00, retry...
error: too many retries during read operation
Probably errors exist during flash read operation.
Do you want to repeat read operation ?
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_flash[FIREFLY_PCB02_GPRS_MT6226_S01.05C_W06_12_818_NEWLC D_V018.BIN]_20080124-223355.B0M.bin
Finished, time used: 59 sec
Remove/Install battery now !

[InfinityHelp]

hello!

is it working phone? looks like flash ic damaged

[Asiang-Com]

hello!

is it working phone? looks like flash ic damaged



phone its ok..
phone no problem.

phone only wan change language use langpack editor..
i want backup but error


http://www.gsmhosting.com/vbb/showpost.php?p=3026281&postcount=38

[InfinityHelp]

hello!

if you still have problems with this phone- i would advice to read out backup on slower speed.