hare is tested pinout n72 rh 37..........

[rajabrotherscom]

a.o.a and hi to all

hare is tested pinout nokia n72 rh 37 and option log also........

COM9 selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A02:8A01]...
CPU: MT6226
chip: 0031:FAB7:1A28
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: K70B.1.2.2
Version: china_sz
detecting structure #2...
done
60 byte(s) read
imei: 13579024******xx
connection Ok
building list...
done
items to clear: 234
warning: wrong packet cs
232 of 234 items cleared
building list...
done
2 items remains
Finished, time used: 56 sec
Remove/Install battery now !

br raja:cool:

[InfinityHelp]

hello!


thank you for sharing this info!!! will include in next pinout collection

[hassan1975]

thx 4 u MR rajabrotherscom

good work



B.R.
Mobitec

[asims]

hello sir
I need pinout for N72 18pin
1-2 = gnd
14-15= +V battry voltage
need TX and RX
Thanks

[InfinityHelp]

hello mr. asims!

i would advice you to spend 10minutes and detect needed pins just by multimeter.
measure voltage on all phone pins and detect tx/rx by this tutorial:
http://www.gsmhosting.com/vbb/attachment.php?attachmentid=118297&d=1187384324

[asims]

hello Infinity help
This is a pin out voltage for N72 18pin set
1-2-8 =gnd
15-14 = +vlotage battry 4.9V
5=3.8v
6=3.0v
7=3.10v
10= 1.39v
11=3.10v
13=3.12v

I need tx and rx pins
Thanks

[InfinityHelp]

hello!

is it MT62...MCU based phone?
there is no tx/rx in this pins.

its either another MCU or there test points on PCB