PDA

View Full Version : G800 Freeze, unlock problem.


flysand
01-27-2008, 07:52
G800 Freeze,
'Normal Mode' can read my phone, but 'Service Mode' can not, anybody know why?? thanks!
by the way, I can unlcok A707 successfully.

Dayratel
01-27-2008, 15:41
G800 Freeze,
'Normal Mode' can read my phone, but 'Service Mode' can not, anybody know why?? thanks!
by the way, I can unlcok A707 successfully.

try with combo mode.

Regards!

flysand
01-28-2008, 04:34
of course, I have tried Combo mode and Combo Cable.

flysand
02-01-2008, 06:11
is there anybody unlocking 'Freeze G800' successfully?

aErOm
02-01-2008, 17:08
your error comes for a bad communication with Phone, may be better trying on other USB port or with other USB interface, or if possible try in other pc, please check and post results.

Best regards !!

flysand
02-02-2008, 11:29
how do you explain that I can unlock A707 with the same cable before?
I think it may be in phone 'usbl' was set into 'Media Model' before it got 'Freeze', not 'Pc suit Model' as usually.
is there any code that can directly set 'USB' Model of phone?
the software always show:ERROR-Can't connect to phone, but I can see 'Samsung CDMA Modem' in 'Device Manager' in my PC.

flysand
02-02-2008, 11:45
Btw, I use UstPor + Combo Cable

silvester
02-08-2008, 01:05
Same story with me.2 absolutely new phones G800 T-Mobile,I have opened myself package.Tried on 3 different boxes(got few of them),
3 different cables,2 computers.ZV60 and U700 does smoothly,G800 ERROR - Can't connect to phone! with combo mode.
With normal mode
Phone info
~~~~~~~~~~~

Phone Model: SGH-G800
Revision: G800BOGK1
IMEI: 357968011010631
Manufacturer: SAMSUNG ELECTRONICS CORPORATION

Reading data from phone...
ERROR - Can't get simlock data from phone!

silvester
02-08-2008, 01:23
In a 5min.after 1st post done,found a topic where essojay suggested,do
not turn on phone before unlock,plug in turned off,wait a bit,then click
unlock.Did as he said and HERE WE GO!Unlock code is realised!!!::p

Best regards