infinity team i need help for flash a JNC MX8

[..::Noman::..]

hello my faverout team how are you?
last dy a mobile came to me for flashing when we its power on its shown a bar that goes on 10% to 100% and shutoff i tried to make its bakeup flash but fail after all i format it and its dead after format ffs its virsion is U6_PCB04_GPRS_MT6228_S02.U6V10B19.BIN and i 1st flash with flashfiles/ChineseMiracle/_MT6228/U6_PCB04_GPRS_MT6228_S02.U6V10B19__ZT321_En_Fr_Vn_ Ru_Th_Cn.B4M.bin

and 2nd time flash with

flashfiles/ChineseMiracle/_MT6228/U6_PCB04_GPRS_MT6228_S02.U6V10B19__Nokia-N93k_64m_En_Fr_Vn_Ru_Th_Cn.B4M.bin

both time result is phone power on but its vibrater on and on nd its show no display on lcd but keypad led is on lcd show no power unfortunatly i dont have its backup.
as talked before this problm bar shown same http://www.gsmhosting.com/vbb/showthread.php?t=487716&highlight=nomi_sg1
phone all images include backup log alrary attached

plz infinity team help me to aliving this phone.

thanx in advance

[..::Noman::..]

here is the imges og JNC MX 8 imges nd backup system loghello my faverout team hoe are you?
last dy a mobile came to me for flashing when we its power on its shown a bar that goes on 10% to 100% and shutoff i tried to make its bakeup flash but fail after all i format it and its dead after format ffs its virsion is U6_PCB04_GPRS_MT6228_S02.U6V10B19.BIN and i 1st flash with flashfiles/ChineseMiracle/_MT6228/U6_PCB04_GPRS_MT6228_S02.U6V10B19__ZT321_En_Fr_Vn_ Ru_Th_Cn.B4M.bin

and 2nd time flash with

flashfiles/ChineseMiracle/_MT6228/U6_PCB04_GPRS_MT6228_S02.U6V10B19__Nokia-N93k_64m_En_Fr_Vn_Ru_Th_Cn.B4M.bin

both time result is phone power on but its vibrater on and on nd its show no display on lcd but keypad led is on lcd show no power unfortunatly i dont have its backup.
as talked before this problm bar shown same http://www.gsmhosting.com/vbb/showthread.php?t=487716&highlight=nomi_sg1
phone all images include backup log alrary attached

plz infinity team help me to aliving this phone.

thanx in advance

[InfinityHelp]

hello!

please send me full opration.log file to infinityremoteupdate@yahoo.co.uk
i will ****yse it and advice some flash file

[..::Noman::..]

here is full opration Log
COM5 [Serial2] selected
Device: Autodetect 6228 NAND
Checking data, wait...
Action: write NAND flash
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom/ffs
source data: page only
identification#1 protocol ver: 04
ver. sw1: U6_PCB04_GPRS_MT6228_S02.U6V10B19.BIN
ver. sw2: U6V10B19
ffs offset/size: 01700000/02900000
id-page Ok
nfi area detection finished: Ok
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6228:8A02:8A02]...
CPU: MT6228
chip: 0031:0000:0101
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
version: 3.1
loader: 3.1.02
NAND: Hynix HY27XS08121M 512+16 32 pages, 66Mb
NAND id: AD76AD76
page size: 200+10
pages/block: 20
bits i/o: 08
address cycles: 04
blocks: 1000
ram size: 00800000
NOR: 0000:000000000000 [00000000]
NAND: 00AD:007600AD0076 [04200000]
NOR chip is not installed
Initialize Done
Set baud...
115200
Set baud Done
Identification...
reading structure area...
detecting structure...
source data: page+spare
converting data...
done 0x00010000 bytes
identification#1 protocol ver: 04
ver. sw1: U6_PCB04_GPRS_MT6228_S02.U6V10B19.BIN
ver. sw2: U6V10B19
ffs offset/size: 01700000/02900000
id-page Ok
nfi area detection finished: Ok
identification#1 structure: 2nd [standard] generation
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
write core area 1 of 2...
write core area 2 of 2...
Write Done
Finished, time used: 1777 sec
Remove/Install battery now !
hello!

please send me full opration.log file to infinityremoteupdate@yahoo.co.uk
i will ****yse it and advice some flash file

[InfinityHelp]

hello!

sorry, but i still insist on full operation log file to my email.
full means- FULL.

[..::Noman::..]

hello!

sorry, but i still insist on full operation log file to my email.
full means- FULL.
plz told me in detail what is full operation log file and how can i found it

[InfinityHelp]

hello!

this is a file named "operation log", located in same folder where Chinese miracle software is.
usually path is following:
C:\Program Files\InfinityBox\ChineseMiracle\operation.log

[..::Noman::..]

i think here is operation loghello!

this is a file named "operation log", located in same folder where Chinese miracle software is.
usually path is following:
C:\Program Files\InfinityBox\ChineseMiracle\operation.log

[InfinityHelp]

hello!

yes, very strange phone. Looks for me like some hardware damage.
Do you have skills to resolder flash IC or at least heat it?

[..::Noman::..]

hello!

yes, very strange phone. Looks for me like some hardware damage.
Do you have skills to resolder flash IC or at least heat it?
thanx for reply
But Its 100% software problam bcz i solved this kind of problam like S500 A808 they both mt6228 and it solved by full flash with MTK.
and a friend in china he send to me these flash files and my problam is solved the ariveing of files is very difficult that why i dont asked to him here is image of that softwarehttp://download220.mediafire.com/f0vyydm0fnmg/9mjpjty400n/2008-02-02_020225.png

[..::Noman::..]

hello infinity team plz take a look of it and help me

[InfinityHelp]

hello!

i still insist on checking flas soldering or MCU.
look to your log file from this point:
==== log opened: [1/26/2008 10:07:44 PM] ====

you had numeros times flash reading error, like it has some hardware fault.