View Full Version : need help pinout for my 6300 china
not2link
02-10-2008, 12:25
help me to find pinout (rx,tx,gnd) for myphone 6300 china. thanks
InfinityHelp
02-10-2008, 13:54
hello!
check this archive, your PCB is there
http://rapidshare.com/files/89821743/Nokia_6300_pinouts.rar
eyestrain
02-10-2008, 14:00
in vepro and in spiderman i encounter most of the time 11=TX and 12=RX
you know where to put the ground right?
try it
and post result hope it could help
not2link
02-11-2008, 10:05
hello!
check this archive, your PCB is there
http://rapidshare.com/files/89821743/Nokia_6300_pinouts.rar
thank for your respect for myproblem, im found myphone PCB. but sorry, what pinout you give is right?. because still not yet connect.
InfinityHelp
02-11-2008, 21:41
hello!
if not work - try to swap tx/rx wires
not2link
02-12-2008, 13:49
hello!
if not work - try to swap tx/rx wires
hello juga!
STILL NOT WORK, i am frustration for this.
my question : if i buy tx/rx finder box from infinity,what certain solve my problem?
InfinityHelp
02-12-2008, 21:52
hello!
our auto finding pinout box do not have connector for this test point groupe.
if you solder wire to each test point and connect wires to our box- it will find needed pins.
but i can advice you another way:
measure voltage on each test point pin and then reffer to this tutorial:
http://www.gsmhosting.com/vbb/attachment.php?attachmentid=118297&d=1187384324
this is easy way to find needed pins by high voltage on them.
the only problem in oyur case: is to connect battery to power terminals.
maybe you must solder wires to "+" & "-" battery terminals and other side to PCB
waqarmunir4
02-13-2008, 16:49
Rx and Tx pinouts are perfect but Gnd is change. by the way thank you inifinity for this.
happy to use infinity box.
thanks it's work great...........
khadim100
07-15-2008, 22:41
good effert. working . . . . . . . . .. . . . . . . . . . .
mazentel..
02-27-2009, 17:17
gooood work bro .... nice work