hare is working pinout unknown chinese pda

[rajabrotherscom]

a.o.a and hi to all

hare is working pinout a unknown chinese pda and ffs opration log to....


COM9 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
chip: 0031:6EFD:154E
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: c:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.5031306D.[M200DY_PCBV1_1_GPRS_MT6226_S01.DY1_EFARV_7N_2S_2C6 0_V03.BIN_ADFE5789].rpl
New firmware detected:
M200DY_PCBV1_1_GPRS_MT6226_S01.DY1_EFARV_7N_2S_2C6 0_V03.BIN

- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 5031306D
identification#1 protocol ver: 04
ver. sw1: M200DY_PCBV1_1_GPRS_MT6226_S01.DY1_EFARV_7N_2S_2C6 0_V03.BIN
ver. sw2: DY1_EFARV_7N_2S_2C60_V03, 76A80152
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
reading [eeprom[M200DY_PCBV1_1_GPRS_MT6226_S01.DY1_EFARV_7N_2S_2C6 0_V03.BIN]]...
file saved: C:\Documents and Settings\raja aumair\Desktop\backup_eeprom[M200DY_PCBV1_1_GPRS_MT6226_S01.DY1_EFARV_7N_2S_2C6 0_V03.BIN]_20080211-210025.B0E.bin
flash: 01227E22202200:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 01227E22202200:29EA0000000000
Write Done
file saved: c:\Program Files\InfinityBox\ChineseMiracle\backup_system_log _5031306D_M200DY_PCBV1_1_GPRS_MT6226_S01.DY1_EFARV _7N_2S_2C60_V03.BIN_ADFE5789_20080211-210046.B0X.bin
Finished, time used: 167 sec
Remove/Install battery now !


and i also send read flash and sis backup file to support team............:D:D:D

br raja:cool:

[InfinityHelp]

hello rajabrotherscom!

thank you for sharing this!!

[GSMSAMI]

thank rajabrotherscom pinout