iPhone v1.1.2 and v1.1.3 unlock for dummies guide

[OLDTIGER]

1. Download and install iTunes software (http://www.apple.com/itunes/download/)

2. Download and install .NET Framework (http://www.microsoft.com/downloads/info.aspx?na=90&p=&SrcDisplayLang=en&SrcCategoryId=&SrcFamilyId=0856eacb-4362-4b0d-8edd-aab15c5e04f5&u=http%3a%2f%2fdownload.microsoft.com%2fdownload%2 f5%2f6%2f7%2f567758a3-759e-473e-bf8f-52154438565a%2fdotnetfx.exe)

3. Download and install ZiPhoneGUI.exe (http://home.no/geezuzz/ZiPhoneGUI.exe)

4. Make a shortcut to desktop of "ZiPhone Shell by Unlock.no", from C:\Program Files\ZiPhoneGUI

5. Connect sync cable to the iPhone and your PC

6. iTunes will automatically start, cancel/close any messages that appear, and close the iTunes program

7. Open "ZiPhone Shell by Unlock.no" from your desktop

8. Put your iPhone in recovery mode;

Press and hold down, both the home and power button on the iPhone, until you see a picture of a CD and Sync cable on the phone’s screen.
*home button = the round button located at the front of the iPhone, at the bottom.

9. Make sure all three boxes to the left of the software are ticked (Jailbreak, Activate, Unlock [and repair])

10. Click on "Free my iPhone!"

11. Wait until unlocking process is finished, approx. 1min… The software will display completed

12. Disconnect your iPhone from the sync cable

13. Insert any network SIM card into your iPhone, and ENJOY! :)

Greetz !

OLDTIGER ;)

[mamaglint86]

thanks for the info mate, u are great

[kaaniletisim]

thanks for the info
Br
KAAN İLETİŞİM

[Velko]

You are the BEST !!!

[Rajbhatitr]

thanks man keep going.....................................

[mobile maker]

thanks alot its very eazy 2 unlock iphone in short time its maximum time taken 6 min for me nice job cheers :)

[musmankhurshi]

Dear Very Very Nice Job

Thanks

10000% Working This


M Usman Khurshid
00923004201203

[taleb_an]

thanks it's very easy to use

[killercu]

I unlock my Iphone with ZIPHONE but after when the phone enter network i cannot dial numbers cause it dump me out of the phone menuneither receive calls, the only way is to add contacts and then touch over them

[i-care]

I unlock my Iphone with ZIPHONE but after when the phone enter network i cannot dial numbers cause it dump me out of the phone menuneither receive calls, the only way is to add contacts and then touch over them
it's not working with older versions like
1.0.2
1.1.0
even if u upgrade it to
1.1.2 or
1.1.3
it will activate and jailbrake the phone but, there will be no network in the phone.

so, as my openion if u r sure that ur phone is OTB 1.1.2 or 1.1.3 than only unlock with this procedure.

regards,
i-care.

[reignsmart]

same thing happened to me.
No Service
after unlock.

my iphone version before unlocking is 1.1.1 boot 4.1
i upgraded to 1.1.3 then after i unlock it, but No service after the process.

[mmaged]

thanks for the info............

[great4nara]

same thing happened to me.
No Service
after unlock.

my iphone version before unlocking is 1.1.1 boot 4.1
i upgraded to 1.1.3 then after i unlock it, but No service after the process.

same problem:confused:

[djyash]

I unlock my Iphone with ZIPHONE but after when the phone enter network i cannot dial numbers cause it dump me out of the phone menuneither receive calls, the only way is to add contacts and then touch over them


Have exactly same problem phone version is 1.1.2.

any solution to repair this problem please.

[Siemens man]

i have same problem toooooooooooo
need repair solution
thanks a lot

[WIDE]

100000000000000000000 % unlock

[BlachThon]

good for work , i want know may be unlock all version ?

[mamaglint86]

i have i phone 1.0{1a542a} and a modem version of 03.12.06_g i want to know if there is any way to unlock this phone

[SLIPLOCK]

hi
guys for no network have you try this

via ssh (winscp),transfert bricktool in /usr/bin
via putty
cd /usr/bin
chmod +x bricktool
bricktool d
should return " PHONE PART ENABLED"

link for briktool
http://www.sendspace.com/file/e0tpu9

[deYo]

Have exactly same problem phone version is 1.1.2.

any solution to repair this problem please.

upgrade to 1.1.3, shift+upgrade and after that unlock with ziphone....today i have this problem and solved.
br deyo

[Siemens man]

guys
tell me this unlocker soft working only for original modem version 04.02.12 and 04.03.13 ????
why not working in updated phone from 04.01.12 to 04.03.13 ???
any one tell me
thanks a lot

[Siemens man]

guys
tell me this unlocker soft working only for original modem version 04.02.12 and 04.03.13 ????
why not working in updated phone from 04.01.12 to 04.03.13 ???
any one tell me
thanks a lot

[rubeltelecom]

my problem no netwark after unlock . I am flow step by step .but phone turn on just sarsing but no net work . my F V 1.1.3(4a93). what can i do.

[i_am_rocky]

1. Download and install iTunes software (http://www.apple.com/itunes/download/)

2. Download and install .NET Framework (http://www.microsoft.com/downloads/info.aspx?na=90&p=&SrcDisplayLang=en&SrcCategoryId=&SrcFamilyId=0856eacb-4362-4b0d-8edd-aab15c5e04f5&u=http%3a%2f%2fdownload.microsoft.com%2fdownload%2 f5%2f6%2f7%2f567758a3-759e-473e-bf8f-52154438565a%2fdotnetfx.exe)

3. Download and install ZiPhoneGUI.exe (http://home.no/geezuzz/ZiPhoneGUI.exe)

4. Make a shortcut to desktop of "ZiPhone Shell by Unlock.no", from C:\Program Files\ZiPhoneGUI

5. Connect sync cable to the iPhone and your PC

6. iTunes will automatically start, cancel/close any messages that appear, and close the iTunes program

7. Open "ZiPhone Shell by Unlock.no" from your desktop

8. Put your iPhone in recovery mode;

Press and hold down, both the home and power button on the iPhone, until you see a picture of a CD and Sync cable on the phone’s screen.
*home button = the round button located at the front of the iPhone, at the bottom.

9. Make sure all three boxes to the left of the software are ticked (Jailbreak, Activate, Unlock [and repair])

10. Click on "Free my iPhone!"

11. Wait until unlocking process is finished, approx. 1min… The software will display completed

12. Disconnect your iPhone from the sync cable

13. Insert any network SIM card into your iPhone, and ENJOY! :)

Greetz !

OLDTIGER ;)



Real good work...tested............thanks

[great4nara]

same thing happened to me.
No Service
after unlock.

my iphone version before unlocking is 1.1.1 boot 4.1
i upgraded to 1.1.3 then after i unlock it, but No service after the process.

try to latest version ZiPhone2.0.zip.

http://www.ziphone.org/

[fonesunlock]

@ OLDTIGER

Very nice guide,, all tested and working ! Thx..

Regards,
Amit.

P.S. Tested on v1.1.2 OTB and v1.1.3 OTB - all okay

[i-care]

AS I SAID ABOVE ONLY OTB 1.1.2 AND 1.1.3 WILL BE UNLOCKED WITH THIS METHOD.
IF UR PHONE WAS 1.1.1 OR 1.0.2 AND U HAVE RESTORE IT TO 1.1.2 OR 1.1.3 THAN UNLOCK IT, THERE WILL BE NO NETWORK IN UR PHONE.

I MADE THIS MISTAKE TOO, BUT NOW I HAVE SOLVED THIS
PM ME I WILL TELL U HOW.

REGARDS,
i-Care

[jalam]

thanks for the info mate, u are great br

[gsmxpert]

Nice Update.......................

[elsheikh]

thanks for sharing............

[HAROON's]

thanks man




br

[ferdie930]

thanks for the info sir. this will be a great help for me as a newbie

[.::Zafar Communication::.]

AS I SAID ABOVE ONLY OTB 1.1.2 AND 1.1.3 WILL BE UNLOCKED WITH THIS METHOD.
IF UR PHONE WAS 1.1.1 OR 1.0.2 AND U HAVE RESTORE IT TO 1.1.2 OR 1.1.3 THAN UNLOCK IT, THERE WILL BE NO NETWORK IN UR PHONE.

I MADE THIS MISTAKE TOO, BUT NOW I HAVE SOLVED THIS
PM ME I WILL TELL U HOW.

REGARDS,
i-Care

hi

sir

i am neweb today i read the whole procedure and try to unlock 1.1.2 version of my iphone every thing is successfully done but after when i dailed the number dailed pad off same problem which my friend face need help how to resolve the problem step by step

and in your thread u use the term OTB what is this please


thanks & regards


Zafar Janjua

[mar_celo]

hi,

the tutorial Is not complete

[OLDTIGER]

hi,

the tutorial Is not complete


which part ? :eek:


just download new updates from http://www.ziphone.org/


regards OLDTIGER :)

[mar_celo]

hi,

were you have to go to twiks 1.1.2 on installer and install iworld after that go to unlocktools and install zibrik so brick can detect 112 and 113
i think that's it

[fonesunlock]

hi,

were you have to go to twiks 1.1.2 on installer and install iworld after that go to unlocktools and install zibrik so brick can detect 112 and 113
i think that's it

Works fine for me on v1.1.2 and 1.1.3 OTB,, no need for iWorld if phone is v1.1.3 ,, plus it wont install.. As for Zibrick what is it used for ?? Sw detects phone fine, just need to press one button.

[brka1]

http://rapidshare.com/files/93897713/iPhone_all_u_need.zip

All you need for IPhone...

[..::: Naveed :::..]

THis is really very easy and nice guide very easy to understand

[..::: Naveed :::..]

hi

sir

i am neweb today i read the whole procedure and try to unlock 1.1.2 version of my iphone every thing is successfully done but after when i dailed the number dailed pad off same problem which my friend face need help how to resolve the problem step by step

and in your thread u use the term OTB what is this please


thanks & regards


Zafar Janjua



Its very simple bro update ur phone with itunes 1.1.2 to 1.1.3 and after updating unlock again tested by me 100% solve the problem

Br
Naveed

[Naz66]

really nice and easy solution i tested with iphone version 1.1.3 phone unlocked with out any problem.thanks for sharing and shame on those who as solution and asking for pm but they dont wana share it on forum for every on shame on them.

[mobilecraker]

AS I SAID ABOVE ONLY OTB 1.1.2 AND 1.1.3 WILL BE UNLOCKED WITH THIS METHOD.
IF UR PHONE WAS 1.1.1 OR 1.0.2 AND U HAVE RESTORE IT TO 1.1.2 OR 1.1.3 THAN UNLOCK IT, THERE WILL BE NO NETWORK IN UR PHONE.

I MADE THIS MISTAKE TOO, BUT NOW I HAVE SOLVED THIS
PM ME I WILL TELL U HOW.

REGARDS,
i-Care
need your help
i unlock iphone version 1.1.3 but after unlock no service.i think i made a unknown mistake .plz guide me or tell here the solution plz

br
mobilecraker

[fonesunlock]

need your help
i unlock iphone version 1.1.3 but after unlock no service.i think i made a unknown mistake .plz guide me or tell here the solution plz

br
mobilecraker

Download and install the latest version of ZiPhone here: http://www.downloadziphone.org/ ,, try again from the start with latest version and post result.

[ibraheem0079]

Nice And Great Work Guys, 100% Working On 1.1.2 Ofb

[microera]

unlock 8GB iPhone is possible with this procedure?

[OLDTIGER]

unlock 8GB iPhone is possible with this procedure?


yep :)

regards OLDTIGER;)

[mustafegur1]

Many many Thanks for this ifo 1000%%%%%%%%%%%%%%%%% ok

[awais008]

i stay in india....i unlocked my iphone as per your instructions as my firmware was 1.1.2....got the done message....removed the sync cable n inserted my sim.....

thn got an error message "incorrect sim.....the phone must be used with an approved sim"

can antone help as what should be done?.......

thnxs

[geepee777]

zip phone exe run problem plz any exe this arrore plz any budy halp ?.........halp........halp

[stanner_austin]

zip phone exe run problem plz any exe this arrore plz any budy halp ?.........halp........halp
NEED .NET
CLICK ON THIS LINK HERE (http://www.microsoft.com/downloads/info.aspx?na=90&p=&SrcDisplayLang=en&SrcCategoryId=&SrcFamilyId=0856eacb-4362-4b0d-8edd-aab15c5e04f5&u=http%3a%2f%2fdownload.microsoft.com%2fdownload%2 f5%2f6%2f7%2f567758a3-759e-473e-bf8f-52154438565a%2fdotnetfx.exe)

AND DOWNLOAD IT INSTALL IT AND CHECK ..
next time search it.

[geepee777]

hallo every budy plz halp my i phony ristor problem and software say 1ristore and now update but my iphone ristore arrore any solution plz halp .............halp

[malikkk]

Use Ibrickr,ziphone, Iliberty Etc
And Press
Dfu Mode
Restore Again
If U See Again This Error
Press Mormal Mode

[geepee777]

i will all try ziphone but same arrore Iliberty,Ibrickr?
any exe ?plz link download this file i try it plz halp

[geepee777]

Use Ibrickr,ziphone, Iliberty Etc
And Press
Dfu Mode
Restore Again
If U See Again This Error
Press Mormal Mode
sir...
same arrore plz any tipe solution plz halp:confused:

[geepee777]

how to fourmet my i-phone 8gb plz anybady halp me i want upgread my hand set but some arrore ristore or not hilight upgread and dimand o2 sim and software say not ragisrtying your sim plz halp

[malikkk]

how To Fourmet My I-phone 8gb Plz Anybady Halp Me I Want Upgread My Hand Set But Some Arrore Ristore Or Not Hilight Upgread And Dimand O2 Sim And Software Say Not Ragisrtying Your Sim Plz Halp

Brother
PUT YOUR IPHONE INTO DFU MODE
WITH IBRICKRS
RESTORE AGAIN 1.1.4 FIRMWARE VERSION

If U See Eroor 1015
And You Are In Restore Mode
You Can Get Out With Ibrickr
Ziphone,independence Etc

[stanner_austin]

how to fourmet my i-phone 8gb plz anybady halp me i want upgread my hand set but some arrore ristore or not hilight upgread and dimand o2 sim and software say not ragisrtying your sim plz halp
first of all be cool.
in case you get error 1015 it don't means your phone is not flashed.
when you see restoring firmware and at time of verifying firmware its give this error means modem (baseband) version is not same as firmware version.
its doesn't mean that you can't use it. phone will be in recovery mode just use ZIPHONE click on advance option. click on NORMAL MODE.
wait some time now you are ready at activation screen.

now you are ready to do it all at ZIPHONE to make phone fully working.

[geepee777]

first of all be cool.
in case you get error 1015 it don't means your phone is not flashed.
when you see restoring firmware and at time of verifying firmware its give this error means modem (baseband) version is not same as firmware version.
its doesn't mean that you can't use it. phone will be in recovery mode just use ZIPHONE click on advance option. click on NORMAL MODE.
wait some time now you are ready at activation screen.

now you are ready to do it all at ZIPHONE to make phone fully working.
http://forum.gsmhosting.com/vbb/showthread.php?p=3420464&posted=1#post3420464 plz see sir ... plz halp thank`s:confused: