sendo s320 s1 pinouts

[pinoy_gsm]

Anybody has the correct pinouts for this model and procedure for flashing. Cannot find on the support site for its specific pinout.



Tia

[pinoy_gsm]

I used the s3xx jtag pinouts, now here's the log. The phone turns but errors. Any ideas?

Ready...
Profile file not exist!
Default file will be created
Error! Default flex file C:\Program Files\Multibox\Sendo_Tool\Flex\320_S1.flx not exist!
Operation aborted!
Connecting to update server...OK
Ready...

Loading MCU file...
File info: FW: SND320 S1 140-P-02.1 Oi LP:ENG ESP PORT
MCU Firmware file loaded...

Loading LP file...
File info: LP: SND320 S1 140-P-02.1 Oi LP:ENG ESP PORT
Language Pack file loaded...

Loading CP and EEPROM file...
File info: EEPROM SND320 S1
CP file loaded...
Waiting for ignition...Timeout!
Waiting for ignition...Timeout!
Waiting for ignition....OK
Reading phone info...
No version data!
IMEI reading error!
IMEI: 000000-00-000000
Communication with phone timeout!
Communication with box error!
SIM Lock reading error!
ERROR: 2
Waiting for ignition...Timeout!

[pinoy_gsm]

More infos:

Phone now is blocked. need to change the imei/simlock but then when trying to change always communication error.

[GSMtricks]

Check your cable first!

[pinoy_gsm]

I succesfully update the firmware using the cable. I was using the jtag cable with 8wires soldered to the pcb. Is there any special pinout for s320_s1, since its not exactly the same as the s2xx_s3xx pcb layout on the support site?


Tia

[GSMtricks]

Make a PCB photo please we try to help you on it