View Full Version : Why GoldCard does not work with Siemens C35?
CrazyBoy
07-24-2002, 14:28
Hi guys!
Why GoldCard does not work with Siemens C35?
CrazyBoy,
I searched the whole forum several times to see if Gold wafer card works with Siemens phones, but I could not confirm if it working or not.
I asked already, if it is working with SL45 or not? nobody answers, seems all the big guys are in vacation mode :) u know its summer.... :)
-=KnOeFz=-
07-25-2002, 00:10
Goldcard doesn't work for Siemens.
Only good for Nokia I think.
Get a silver of green card and use sim_emu for Siemens.
I have just cut my Silve card (PIC2) card, and I used it with Siemens SL45.
Sim_emu v. 4.01 didnot work
Sim_emu v. 3.0 is working.
Why the new version is not working for me?
i have same problem, i just program version 4.10 on green card, but it not work on my C45 and nokia 3310. but when i try to program version 3.00 it work on my C45 and 3310 . anybody can give me some trick to make version 4.10 work on green card and my phone....
Thanks.
JSompis
The SIM-EMU 4.10 works fine in S45, SL45, C45 and 3310.
Try to write the hex's again with the ICProg verification activated to confirm the successfull write.
Enter the IMSI /KI data using the menus.
The S45 works better using GreenCard instead of SilverCard. Sometimes gives Card Error in the SilverCards.
Regards
I use SIM-EMU on a greencard, the phone i use is a Siemens ME45 FW version 21, everythime i start the phone i get a Card Error, it is impossible to make a call, then i recieve a Card Error again. It is possible to send sms. The card work perectly on a Nokia 3310..
The ME45 has the same soft that S45 and must work.
Perhaps the problem is the phone version.
One person say me that ME45 works fine in his version and SIM-EMU 4.10.
Regards
Ok, here is my experience with SIM-EMU v. 4.10 in my Siemens SL45, First time I input directly the KI and IMSI using SE410Config by Eurocrypt, the phone gives me a card error problem.
I then tried Directly the Original files of SIM_EMU v. 4.10, it works without any problem, I then enter the KI and IMSI form within the phone menu, and it is now working without a single error..
Hope this will help somebody.
@ crazyboy, still nobody confirms the Gold card works in Siemens phones. I could make it work on Nokia, AlCatel only.
I solved the problem with the ME45, found out that my progammer did not program the eeprom file correctly. Used a another software to program the eeprom file. Now it works perfectly on my ME45!