problam detacting txrx with spreadtrum cpu

[joni_rajpura]

i have install pinout finder 1.06 and try to detect rx tx with pinout finder but

can able to find during prossess rx is moving like 12345 but tx is still on 2 i

think this is majer problam i have phone with connector type 2x5 what shuld

i do now urgent help need plz :rolleyes::rolleyes::rolleyes::eek::eek::eek:

[InfinityHelp]

hello!

thank you for this test report.
we will check situation

[joni_rajpura]

plz cheq as soon as possible i have 5 set with restart problam

[zinoubinabil]

plz cheq as soon as possible i have 5 set with restart problam
HELLO
till now spredtrum cpu with restart not supported yet;
we are working about this cpu in nearest future will support


br

[InfinitySupport]

i have install pinout finder 1.06 and try to detect rx tx with pinout finder but

can able to find during prossess rx is moving like 12345 but tx is still on 2 i

think this is majer problam i have phone with connector type 2x5 what shuld

i do now urgent help need plz :rolleyes::rolleyes::rolleyes::eek::eek::eek:

What to do:
1. be sure that CPU type selected correctly
2. be sure that cable inserted completely

If still no luck: please, open phone and give me detailed information about CPU type (complete CPU name) via e-mail: InfinityHelp@yahoo.com.hk

[joni_rajpura]

ok plz tell me how to work with this cpu then i can realize i m write or worn and if i m going wrong then i will tell u what think i made wrong

i any one can tell me whole process with screen shot i will thank full to him

[InfinitySupport]

Hello,

Currently PinFinder solution was released by Infinity-Box. More functions for Spreadtrum CPU will be supported soon.

[peter002]

hello mr infinity support... i hav also seen that onllt mtk cpu is supported in infinity and thats y ur customers and tended to buy the other chinies boxes... plz add the support of other all cpus in infinity as soon as possible....thanx.. w8ing for ur response.

[joni_rajpura]

se still rx is moving and tx is not moving :eek::eek:

[peter002]

se still rx is moving and tx is not moving :eek::eek:
brother this cpu still not supported by infinity.. thats y its not working busy

[InfinitySupport]

@peter002
you must thisnk before write something

@joni_rajpura
You must make everything exactly by manual instead of think about "moving or not moving..."

Did you press and hold phone power buton ?
Did you read manual and followed iot exactly as described ?
Here is manual especially for you: http://www.infinity-box.biz/download/public/Infinity-Box_PinFinder.pdf
Please, read it and you will see detailed pictures.
After you have read it, please, explain here what you have tried to do and what is wrong.

One more advice: if still no luck after all reading I recommend you make "Reverse" button pressed and repeat process.

Questions:
1. What is CPU chip name in your phone ? (open phone and post here exact CPU chip name)
2. Are you sure that this phone has Rx/Tx pins on bottom connectors ? (some phones has no Rx/Tx on connector)
3. Did you opened phone and checked Rx/Tx points on phone PCB ? (some phones has Rx/Tx on PCB but not on phone bottom connector)

Please, post here exact answers

[joni_rajpura]

yes sir i do all this as u said but still no luckse i show in pic. rx is moving in prosess but tx cant move in with mtk cpu both rxtx moved one by one so i cant understand why tx is not moving :eek:

[InfinitySupport]

Thank you for TOTAL IGNORANCE !

Please, read this again: http://67.15.194.130/vbb/showpost.php?p=3116157&postcount=11 and see how many times I write "please" there, what questions was asked and what ZERO answers I have got.
I have no reason to continue this discussion due to total respect absence and total ignorance.

This thread is good example how people NO NEED to do.

[habeebo]

yes sir i do all this as u said but still no luckse i show in pic. rx is moving in prosess but tx cant move in with mtk cpu both rxtx moved one by one so i cant understand why tx is not moving :eek:
yes . i tested in cect c1000 {spreadtrum cpu }its moved one side . it was rx side but after programme found it as pin 12 the tx side moved to 13 . so it work like that

[InfinityHelp]

hello mr. habeebo!

can i count your post as sucessful test report? DId you found correct pinout?

[habeebo]

yes for cect c1000 pin finder read tx and rx as 12,13 i cant do any job like read code etc.. untill your team improve chinese maricle to work with this kind of cpu but pin finder work perfect with mtk cpu i tested in many phone . thanks infinity team for your hard work .

[habeebo]

software version: 1.06
cable type: 1x18 (L18A)
platform: SPD: Spreadtrum
searching adapter at COM7...
adapter found, version: 2000
pins: 18, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now (not required but recommended) !
detecting pins...
Rx:12
result: Rx:12 Tx:13
time required: 59 sec
Power On !

[InfinityHelp]

hello!

thank you for your test report! We work hard everyday to add all chinese models to autopinout finder & for flashing and FFS format

[joni_rajpura]

i m also waiting for any phone comes with sped cpu to me and i also want to test on 3 or 4 more phones i respect u team u made agreat update and i hope more to come soon so keep it up your hard work team