security bypass stage 2 not working [Archive]

dimon

02-25-2008, 17:50

SE k550 with gdfs startup err: 29
Stage 1 passes without problem, Stage 2 allways endless processing:
--- Security Bypass------------------------------------------------------------
User selected phone K550 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 356657-01-6***xx-0
OTP CID = 51
EROM Color = 4 : REDEROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Hint : Now the probe might be disconnected
Processing...
Warning : Aborted by user.

--- Security Bypass------------------------------------------------------------
User selected phone K550 using Test Point boot mode
Stage 2 start
Hint : Now the probe might be disconnected
Processing...
Warning : Aborted by user.

dimon

02-25-2008, 17:55

dream box is not plus version, 1.11 firmware

Skaza

02-26-2008, 17:37

you must connect TP to ball
this work dreambox v1

..::AppleLinks::..

02-28-2008, 12:22

SE k550 with gdfs startup err: 29
Stage 1 passes without problem, Stage 2 allways endless processing:
--- Security Bypass------------------------------------------------------------
User selected phone K550 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 356657-01-6***xx-0
OTP CID = 51
EROM Color = 4 : REDEROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Stage 2 start
Hint : Now the probe might be disconnected
Processing...
Warning : Aborted by user.

--- Security Bypass------------------------------------------------------------
User selected phone K550 using Test Point boot mode
Stage 2 start
Hint : Now the probe might be disconnected
Processing...
Warning : Aborted by user.

Update you r Box to SE,Conect TP very Clearly To testpoint,(ic ball),mean testpoint should to touch very closely the ball.

obg1

02-28-2008, 12:24

thanks thanks ....osman