N6500 restart problem

[..::Sunil::..]

Hi

Infinity team,


I have one n6500....Its restart problem....I did format ffs n flash with same version.....


Format ffs log:


COM7 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6205:8B00]...
CPU: MT6205
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #01 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #02 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #03 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #04 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #05 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #06 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #07 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
number of flash chip/regions detected: 08/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #01 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 00400000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: DAYO_NEP_06B_PMJ_PCB01_GSM_MT6205B_DN.MAUI_06B_W07 _20_MP_V7.BIN
ver. sw2: MAUI.06B.W07.20.MP.V7
ffs offset/size: 003C0000/00040000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 003C0000
flash: 01227E221A2201:18E59F00000000
checking area[00000000]: 00000000-003FFFFF...
eeprom/ffs found near: 003C0000
detecting eeprom/ffs size...
eeprom/ffs size: 00040000
ffs chip: 00
eeprom/ffs area: 00000000:003C0000-003FFFFF
flash: 01227E221A2201:18E59F00000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 01227E221A2201:18E59F00000000
Write Done
Finished, time used: 24 sec



Flashing log:


COM7 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6205:8B00]...
CPU: MT6205
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #01 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #02 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #03 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #04 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #05 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #06 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #07 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
number of flash chip/regions detected: 08/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: DAYO_NEP_06B_PMJ_PCB01_GSM_MT6205B_DN.MAUI_06B_W07 _20_MP_V7.BIN
ver. sw2: MAUI.06B.W07.20.MP.V7
ffs offset/size: 003C0000/00040000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
Area: Firmware
flash: 01227E221A2201:18E59F00000000
Write: Firmware
Write Done
Finished, time used: 135 sec
Remove/Install battery now !

_____________________



Problem is still same....Can i try any other n6500 file...?

This all files available on support site....

CM_Cect-N6500+_VT26_06B_V626HDX_PCB01_GPRS_MT6226_S01.V626 HDX_SAM_SET_8312_V2_0_16m_En_Ru_Fr_Th_Cn.B0M.bin

CM_Nokia-N6500_MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.MAUI_ 05C_W06_16_16m_En_Ru_Fr_Es_Th_Vn_Pt_Ar.B0M.bin

CM_Nokia-N6500_S500_PCB01_GPRS_MT6227_S01_16m_Ru_Fr_En_Th_V n_Ar_w_eeprom.B0M.bin

CM_Nokia-N6500-2sim-2camera_MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.MAU I_05C_W06_16_16m_En_Ru_Fr_Es_Th_Vn_Pt_Ar.B0M.bin
CM_Nokia-N6500_Cect-838_KONKA26_05C_D163A_PCB01_GPRS_MT6226_S01.808_10 _22_RTH_16m_En_Ru_Th_Vn.B0M.bin

CM_Nokia-N6500_v2_MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.MA UI_05C_W06_16_16m_En_Ru_Fr_Es_Th_Vn_Pt_Ar.B0M.bin
CM_Nokia-N6500_S500_PCB01_GPRS_MT6227_S01_16m_Ru_Fr_En_Th_V n_Ar_w_eeprom.B0M.bin

Plz tell me which i file i can write in this phone....Thx....



B.r.
Sunil.

[InfinityHelp]

hello!

you formatted second MCU
now find first MCU pinout and format first MCU part

[..::Sunil::..]

hello!

you formatted second MCU
now find first MCU pinout and format first MCU part
I don't know how to find pinout....So i will return phone to customer....Thx for reply....



B.r.
Sunil.

[..::Sunil::..]

I got pinout....I did format ffs n now phone working fine....


COM9 [VCP0] selected
Device: Autodetect 6205-6227,6228 NOR
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.6AA30B4F.[MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.MAUI_05C_W0 6_16.BIN_E9BA60B1].rpl
New firmware detected: MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.MAUI_05C_W0 6_16.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: 6AA30B4F
protocol ver: 04
ver. sw1: MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.MAUI_05C_W0 6_16.BIN
ver. sw2: MAUI.05C.W06.16
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [eeprom[MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.MAUI_05C_W0 6_16.BIN]]...
file saved: backup_eeprom[MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.MAUI_05C_W0 6_16.BIN]_20080226-200628.B0E.bin
flash: 01227E22202200:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 01227E22202200:29EA0000000000
Write Done
file saved: backup_system_log_6AA30B4F_MTK26_05C_MASTER_PCB01_ GPRS_MT6226_S01.MAUI_05C_W06_16.BIN_E9BA60B1_20080 226-200646.B0X.bin
Finished, time used: 243 sec
Remove/Install battery now !


Great support....Thx a lot....:)



B.r.
Sunil.

[InfinityHelp]

hello!

nice to know this :)