Anycool F818 seccond IMEI can not be written..

[KUBAT1]

I have found seccond pins for Anycool F818 but when try to change seccond IMEI with method 3 it always says tunoff phone and then turn on without removing battery. I do all as software want.. but no succues to write IMEI, always error. Please help!
regards

I upload edited file for you on rapidshare, you can download it from this this link:

http://rapidshare.com/files/94930127/smobi_editor_corrected_backup_flash_TELSDA26_05C_P CB01_GPRS_MT6226_S01.C338_FORE_LANG_08_01_16_V1_0. .html

if you need, change picture in firmware with Picture Editor.

My friend! how did you edited this firmware? wil it show turkish lang in the phone..? what dictionary you used.. I see translation is very bad.. customer will not accept this.. may I correct it? if I make correction will it be effected to the firmware?
regards..

You can edit this firmware as you wish. Abiut dictionary - sorry, but i don't know turkish language and use only dictionary maked by testers.
OK I will try to corect it and upload..hope iy will show..

one more:
I am trying to chanhe Seccond IMEI on anycool F818 but Always I get this error, software tell me poweroff and on, I do but then phone can not boot..

OM4 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: imei
imei write method: mode-3
new imei: 351113*********
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6223:8A04]...
CPU: MT6223
chip: 0011:6FB3:000C
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: BF7353FFFF0052:2AEA0000000000
flash: BF7353FFFF0052:2AEA0000000000
flash: SST SST34HF3244/3284 U 4Mb
detecting chip #01 in region #00...
flash: BF7353FFFF0052:2AEA0000000000
flash: BF7353FFFF0052:2AEA0000000000
flash: SST SST34HF3244/3284 U 4Mb
detecting chip #02 in region #00...
flash: BF7353FFFF0052:2AEA0000000000
flash: BF7353FFFF0052:2AEA0000000000
flash: SST SST34HF3244/3284 U 4Mb
detecting chip #03 in region #00...
flash: BF7353FFFF0052:2AEA0000000000
flash: BF7353FFFF0052:2AEA0000000000
flash: SST SST34HF3244/3284 U 4Mb
detecting chip #04 in region #00...
flash: BF7353FFFF0052:2AEA0000000000
flash: BF7353FFFF0052:2AEA0000000000
flash: SST SST34HF3244/3284 U 4Mb
detecting chip #05 in region #00...
flash: BF7353FFFF0052:2AEA0000000000
flash: BF7353FFFF0052:2AEA0000000000
flash: SST SST34HF3244/3284 U 4Mb
detecting chip #06 in region #00...
flash: BF7353FFFF0052:2AEA0000000000
flash: BF7353FFFF0052:2AEA0000000000
flash: SST SST34HF3244/3284 U 4Mb
detecting chip #07 in region #00...
flash: BF7353FFFF0052:2AEA0000000000
flash: BF7353FFFF0052:2AEA0000000000
flash: SST SST34HF3244/3284 U 4Mb
number of flash chip/regions detected: 08/01
Initialize Done
Set baud...
460800
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: BF7353FFFF0052:2AEA0000000000
flash: BF7353FFFF0052:2AEA0000000000
flash: SST SST34HF3244/3284 U 4Mb
detecting chip #01 in region #00...
flash: BF7353FFFF0052:2AEA0000000000
flash: BF7353FFFF0052:2AEA0000000000
flash: SST SST34HF3244/3284 U 4Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 00400000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: E558AGENT_V60_MT6223S00.01_1_20071113.BIN
ver. sw2: E558AGENT_V60.01.1, 00000000
ffs offset/size: 00380000/00080000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00380000
flash: BF7353FFFF0052:2AEA0000000000
flash: BF7353FFFF0052:2AEA0000000000
checking area[00000000]: 00000000-003FFFFF...
eeprom/ffs found near: 00380000
detecting eeprom/ffs size...
eeprom/ffs size: 00080000
ffs chip: 00
eeprom/ffs area: 00000000:00380000-003FFFFF
reading [eeprom[E558AGENT_V60_MT6223S00.01_1_20071113.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\ANYCOOL\backup_ee prom[E558AGENT_V60_MT6223S00.01_1_20071113.BIN]_20080226-110945.B0E.bin
flash: BF7353FFFF0052:2AEA0000000000
flash: BF7353FFFF0052:2AEA0000000000
Identification Done
Manipulation...
imei is not detected !

What to do:
1. Power-On phone, Power-Off by "Power" button, don't remove battery !
2. Repeat "imei repair" procedure again
If still no luck: read flash and send to support
Manipulation Fail
Finished, time used: 323 sec
Remove/Install battery now !

[InfinityHelp]

hello!

what result gives IMEI writing with First and second method?

[KUBAT1]

first and seccond methot no connection with phone..
but when I write first time software said something like, can not write to area 0:00F........ after that always gives the error above..

[InfinityHelp]

hello!

please give us few days to improve operation with this Flash type

[InfinityHelp]

hello mr. KUBAT1!

we finished testing with this flash IC type.
today few hour later will be uploaded improved version with this bug corrected.
I hope you still have this phone on hands to make tests

[da.voood]

hello.
i have this problem too.
pls help me infinityhelp.
i cant change 2 imei for anycool and n72 and .... in 3model.
i bay mctool box for that problem.but i cant do that.
pls help me.
my mail is da.voood@yahoo.com
tnx