jawad8305
02-27-2008, 00:15
I'm trying to flash a C72 but the OTP imei is damaged !
Auto Ignition...
Transfer boot...
BOOT is loaded...
Pause 2 sec...
Getting Information...
FlashID: 0001,227E
C72 SIEMENS 358134004590878
HASH: 5F03E8A9FA82B89502E4B7EB7F8DE93A
OTP ESN: E6FB65B1
OTP IMEI: Not recorded or incorrect!
Reading segment A0000000 BCORE...
Segment BCORE is saved in E6FB65B1_A0000000_BCORE_080226220345.bin
It was BCORE version: "main_1.0_V26 "
Write BCORE version: "main_1.0_V22 "
Incorrect Information of Flash CFI!
Error writing BCORE segment!
Repeat Operation!
How it can be fixed ?
I'm trying to flash a C72 but the OTP imei is damaged !
How it can be fixed ?
...see bellow:
1 - Downgrade with any way to <36 version.
2 - Open x65PapuaUtils, Press "Service Mode"
3 - Go to "Codes" and press "Auto Open All"
4 - Go to "Flash", mark "Pause" and "New BCore V22"
5 - Press "Do Job" and wait for finish.
6 - Turn Off mobile if not auto off.
7 - Go to "Settings" and press "Service Mode"
8 - Go to "Flash" and mark "Recalculate Keys in Flash" (two more options will be auto mark, all itīs ok)
If any advice of Wrong entry appear return to codes section and fill Skey and Bkey with any numbers.
9 - Press "Do Job" and wait for finish.
10 - Go to "Settings" and press "Service Mode"
11 - Go to "Codes" and press "Auto Open All"
12 - Press "Freia.log" and save file with any name, but remember this name later
13 - Press "x65flasher.ini" and save file in x65flasher dir.
14 - Open x65flasher.exe and Press "Connect"
15 - Change "Leght" to 40000 and Press "Read Flash", save file
16 - Open SSWx65.exe and write your ESN, calculated by Papuas, Inverted in "Phone Id"
EX: In codes section of Papuas you get ESN: A1B2C3D4, then write in "Phone Id" of
SSWx65.exe in this way: D4C3B2A1.
17 - Write new imei in "New phone Imei" and Press "Dissable OTP", select file saved in step 15.
18 - Save file.
19 - Open x65flasher, select Leght to 40000 and Press "Write Flash", select file saved in step 18.
20 - Press OK to Skip Write BCore confirmation.
21 - Open mapper.exe, select log file saved in step 12, write imei of step 17, MUST TO BE THE SAME!
22 - Open x65PapuaUtilsV, Press "Service Mode", Go to "Codes" and press "Enter Skey in Phone"
23 - In right window must see "Telephone in Factory Mode"
24 - Open Siemens EEPROM tool.exe, Press "Init", Press "Load" and select map file saved in step 21, Press "Select All" in left side, Press Right Arrow, Press "Select All" in right side, Press "Save Selected".
25 - Turn OFF your mobile, and turn ON again for confirmation of new Imei.
...or use the patch to activate changing directly by PapuaUtils....
dagos
jawad8305
02-27-2008, 14:05
I appreciate your help,Thank you