.: krypton :.
02-27-2008, 14:19
hi,
need pinout for samsing A388
18 pin connector
tested 1,2 gnd
tried 2,4,6,8,15,16 for tx/rx without result
pin 2,4 is 2.25 volt pin 6,8,13,16 2.93 volt pin 15 2.83volt
I Have NOT Done Software But Once I Had Open And Saw Some Points Near Display On Pcb Try It
InfinityHelp
02-27-2008, 19:31
hello!
when you open phone to access test points- make sure it is MT62xx processor
.: krypton :.
02-28-2008, 06:37
yes your are right, there is rx0 tx0 and rx1 tx1
http://www.gsmhosting.net/vbb/attachment.php?attachmentid=143037&d=1204176885
but not see Mt62XX !! this is spreadtrum cpu and i need to read user code, how to do that ? thanks.
InfinityHelp
02-28-2008, 17:10
hello!
spreadtrum MCU is not covered yet. working hard to include it to supported MCUs list