View Full Version : Really BAD N328 Phone-HELP
Mates ,
Jyst Purchased My Autofinder Cable Box For My Great Infinity .Upgraded the product so that it could work with the same .All Was Smooth .Then i Connected The Dead N328 Phone to the Autofinder Cable Adapter .IT cannot find anything ,Nothing is Working .I have this phone that is not like other phones in the market ,this one has Single SIM Card .It Has the following written also "ZTC N328" on the lable and also ZT N328 written on another.Totally Dead Phone
Amarbir S Dhillon
Chandigarh,India
InfinityHelp
02-28-2008, 20:00
hello!
if MCU in this phone is MT62xx pinout will be found even if phone dead.
but it must be dead by software reason.
If it is some hardware fault- for exaple power problem- of course it will not detect anything.
as i can see on poicture you attached- phone is connected properly.
Do you hold power button pressed all the time while program search for pinout?
hello!
if MCU in this phone is MT62xx pinout will be found even if phone dead.
but it must be dead by software reason.
If it is some hardware fault- for exaple power problem- of course it will not detect anything.
as i can see on poicture you attached- phone is connected properly.
Do you hold power button pressed all the time while program search for pinout?
Hi There ,
the Infinity Box Have To Be Fbus or Mbus ,Also i Would Like To Tell you that I am Pressing The Power Button All The Time ,this Has a MT6226BA CPU Indeep And a 8 Pin connector for the L8A Cable It also Has Another Connector ,Is this The One I Need to Use ?
amarbir singh dhillon
chandigarh,indian
Hi,
i also tried the 18 pin cable in the another connector ,no use still not detecting,how to do hardware testing
InfinityHelp
02-28-2008, 21:09
hello!
my advice- take one working phone with known pinout.
use auto pinout finder to find it pinout.
when you will be 100% sure that you correctly using pin_finder- you can try one more time on your N328.
if still pinout can not be detected- it is hardware fault
pinout in this phone is located in 18pin connector
ZTC_N328 (N82 Nokia copy)
connector 18A
1.........18
CPU1
18-gnd
12-Tx(2.76v)
10-Rx(2.69v)
Sir ,
Exactly ,tommorow From Office i Will Post Results ,I will Definately Do that .Thanks For Support .this is Single Sim Phone Not Dual
Sir ,
Here Goes The Update ,I am Able To Use the Pinfinder Hardware ,On another Phone ,I tried Two Phones ,Now I Want Help That Can Some Person Post Some Schematics And Service Manual For Chinese Mobile Phones Based On 6226 CPU .
amarbir
chandigarh
Update ,
the Phone Consumes .033 Amps and Then Drops the Amps When started ,Gimme some schematics