!!!!!!vepro Support!!!!!!!

[mobilecraker]

HI
all the members who hav vepro box are fed up of troubles using vepro box.bcoz we havnt any true support ,good user manual,language problem etc.
then why not use this thread to share problem,experiences with vepro box?



please share ur opinion
br
mobilecraker;)

[segun01]

its a very good idea that we share exprience. d box is good but no surpport, filash file problem etc

[..::Mr999::..]

i use my self vepro , till now which phone i test on vepro only for find RX and TX and some For Format also ( normally i use Infinity For Formating & vepro as interface )

and working fine , better thing is when you successfully read RX TX on software save them in computer in text file with details , so if phone come again you can use RX TX by your self also . also one video file come with software when you install , they all described in that Movie . but we can share our ideas and experience here

Br ;)

[mobilis]

Dears pls my need is to decode wire color cable, one of vepro has not connectors but onlu 10 wires yellow,red,blue,red,white, black, green, brown, grew, magenta. pls wich one is going to conect to tx,rx,gnd,vcc on phone pcb ??

[AMIT~S]

Dears pls my need is to decode wire color cable, one of vepro has not connectors but onlu 10 wires yellow,red,blue,red,white, black, green, brown, grew, magenta. pls wich one is going to conect to tx,rx,gnd,vcc on phone pcb ??

i need also for my super doctor:cool:

[hooi76]

how to decrypt the read flash files so that i can flash it to other phone ?

[JOTECH]

i have ve pro box but no manual on how to effectively put the box to use , anyone with useful information

[.:KHALIFA:.]

i have ve pro box but no manual on how to effectively put the box to use , anyone with useful information
write ur problems here ..... ill try to help ......

[hooi76]

write ur problems here ..... ill try to help ......

how to decrypt the read flash files so that i can flash it to other phone ?

[sanjubhai]

how to format the phones with spreadtrum cpu,
by vepro box, i think it requires usb cable but from where i can arrange this cable, and also the driver for this cable.

[MED9]

how to decrypt the read flash files so that i can flash it to other phone ?

PRESS CTRL+ALT+J
:D

[hooi76]

PRESS CTRL+ALT+J
:D

not working with that command
:(:(:(

[baraka42]

how to decrypt the read flash files so that i can flash it to other phone ?


what cheap phone you want to read ?

i think when you set and spy Define phone [ detect and connect phone with box. correctly] then you have to select right flashing sw for it . for example. MTK-ADI-SPD..

and then you can read . if there is option for read.

there is video for help.with vepro box dvd. but it chines language.:confused:

wbr

[viks]

i use my self vepro , till now which phone i test on vepro only for find RX and TX and some For Format also ( normally i use Infinity For Formating & vepro as interface )

and working fine , better thing is when you successfully read RX TX on software save them in computer in text file with details , so if phone come again you can use RX TX by your self also . also one video file come with software when you install , they all described in that Movie . but we can share our ideas and experience here

Br ;)

i also tried alot by infinity and et box after getting pinouts by vepro but always getting errors

[JOTECH]

Please we needed someone good and exprienced in the use of this ve-pro software to kindly assist us in the perfect way to uses the software perfectly in the area of formatting and flashing cos i bought the ve-pro plus box can not connect or detect phones.

[kkio]

dear master,i just get the vepro box,but all in chinese,i cant even install the driver,does any great man here can upload a driver for me,i get 4 Dvd disk,all in chinese format,i even cant install anything from cd,and plz i need advance how to install/unzip these chinese language format acive exe file in a english windowsXP....plz help,need computer expert here/

[aravimobile]

all ve-soft support english language. the language files name is 'langs.ini'.
like vepro mainsoft and xintel mainsoft, langs.ini file is save to 'veini\langs.ini'
you can open and edit it to change any language.

[gsm5378]

i use my self vepro , till now which phone i test on vepro only for find RX and TX and some For Format also ( normally i use Infinity For Formating & vepro as interface )

and working fine , better thing is when you successfully read RX TX on software save them in computer in text file with details , so if phone come again you can use RX TX by your self also . also one video file come with software when you install , they all described in that Movie . but we can share our ideas and experience here

Br ;)

we also used only for find tx rx . therefor some models not format vepro but inifinity can do . :D

[clinx]

all ve-soft support english language. the language files name is 'langs.ini'.
like vepro mainsoft and xintel mainsoft, langs.ini file is save to 'veini\langs.ini'
you can open and edit it to change any language.sir, can u tell me, how i found rx tx with veprobox! step by step plzzz

[khadim100]

if you have vepro box. open mainsoft . click on spy define ---> select chip ---> select pin (cable) ---> spy mode (normal) --> click on spy define button & push power button its take few seconds or mintes now rx tx gnd appear then click on set define button & go to mtk flasher & do any job.

[sanjubhai]

when i flash my hi zoom camera pda set with ve pro soft then , the display get white and only i am able to recieve the calls but not to authorise who's calling.

[rk_grover77]

hi i purchased new vepro always getting error "initialisation error" while reading or formatting..also try as directed by video file but result same..plz help someone.

[yosalynn]

if you need vepro operation instruction,please chat with ICQ:498003626

[yosalynn]

you need ve pro english driver ,please contact ICP:498003626,or yahoo:yosalynn_hengwei@yahoo.cn

[Ravvi]

hi i purchased new vepro always getting error "initialisation error" while reading or formatting..also try as directed by video file but result same..plz help someone.

Yes sir im also purchased new vepro box 2-3 days before.....Hello vepro team if u can hear me..plz make new thread in this forum...we are all with u...plz make thread where we all can share our problems & solutions

[ajaycuteboy]

i got vepro but it does't conect the set

[neilthirumuttam]

PLS POST LINK GET DETIALS OF VEPRO
thanks in advance

[sanjubhai]

Yes sir im also purchased new vepro box 2-3 days before.....Hello vepro team if u can hear me..plz make new thread in this forum...we are all with u...plz make thread where we all can share our problems & solutions
nice question ravi i think vepro team must show their kindness and help us by giving their precious support.....

[masterunlock]

Yes sir im also purchased new vepro box 2-3 days before.....Hello vepro team if u can hear me..plz make new thread in this forum...we are all with u...plz make thread where we all can share our problems & solutions


First try to change speed and test.hope it will solve your problem.





thx

[cellbhai]

Is it support spreadtrum,skywork ic's?Is is take backup of eeprom?

[neilthirumuttam]

will any one please to illustrate the usage of vepro box ?

[cellbhai]

Hallo MR.999, when i open MTK software path error msg coming.I directly installed latest ENGLISH VERSION 2.42.SEE PIC.

[baraka42]

Hallo MR.999, when i open MTK software path error msg coming.I directly installed latest ENGLISH VERSION 2.42.SEE PIC.


have you install wepro at D: drive ? or C: drive ?

old version was work on same drive?

wbr

[chiragp]

@cellbhai

Ur Box Is Vepro And U Have Used Xintel Box Setup ,so Kindly Use Proper Setup

Also Try To Check The Following Path Cant Find Exe

Thanks

B.r
Chiragp

[baraka42]

How to use vepro ? video here.

wbr

[baraka42]

How to use vepro ? video here. 2

wbr

[cellbhai]

@cellbhai

Ur Box Is Vepro And U Have Used Xintel Box Setup ,so Kindly Use Proper Setup

Also Try To Check The Following Path Cant Find Exe

Thanks

B.r
Chiragp

Yes I nststalled diectly 2.42.U given 2.39 set up.After intsallation box is working with MTK.I read pin out of SKY WORK,SPREADTRUM IC.I cannot reset pasword.any idea?

[cellbhai]

@cellbhai

Ur Box Is Vepro And U Have Used Xintel Box Setup ,so Kindly Use Proper Setup

Also Try To Check The Following Path Cant Find Exe

Thanks

B.r
Chiragp

Yes I nststalled diectly 2.42.U given 2.39 set up.After intsallation box is working with MTK.I read pin out of SKY WORK,SPREADTRUM IC.I cannot reset pasword.any idea?:confused:

[kcponsel]

sir, i just buy a new vepro, i still confuse how determine the correct chips, how can we know this phone is mtk, adi or else?

now i have a phone, i want to read flash, but when i plug the cable, the red led (show short) blinking. why?

thanks

[chiragp]

@kcp

beacuse its hardware problem solve first hardware than try software

ur pcb is short

thanks

b.r

chiragp

[chiragp]

Yes I nststalled diectly 2.42.U given 2.39 set up.After intsallation box is working with MTK.I read pin out of SKY WORK,SPREADTRUM IC.I cannot reset pasword.any idea?:confused:

cellbhai

for speadtrum chip u have to wait till new update

thanks

[kcponsel]

thanks sir, but this phone in good condition, i want to try to make read flash, now i already can spy define, it shows rx, tx

but when i want to read info, it cann't, it show initinitial error (i already press the power on) thanks

[riyas+81]

i have bought one vepro box but ihave no idea pls video

[baraka42]

i have bought one vepro box but ihave no idea pls video


pls. read befor ask.

check post no. 35 and 36 of this thread. there is video.

wbr

[cellbhai]

Dear friends,Here VEPRO BOX MANUAL.THANKS TO DILIP NATH
http://rapidshare.com/files/113104755/Vepro_Manual.rar.html

[neilthirumuttam]

dear mates,

when ever tryig with MTK software here with a 6300

connecting mobile phone.
>>initinitial error!

always this error ocuures
but it can do spy and define pin from this fone
i tried re spy with repeat all pin option ticked in
spy define tab and done the steps as in the help vedeo
and tried with differnt baud rate in the exe too

same result" connecting mobile phone.
>>initinitial error!"
let me anticipate
help

regards,
NEIL

[neilthirumuttam]

Dear friends,Here VEPRO BOX MANUAL.THANKS TO DILIP NATH
http://rapidshare.com/files/113104755/Vepro_Manual.rar.html

THANKS VERYMUCH FOR THIS MANUAL

REGARDS,

NEIL

[khadim100]

dear mates,

when ever tryig with MTK software here with a 6300

connecting mobile phone.
>>initinitial error!

always this error ocuures
but it can do spy and define pin from this fone
i tried re spy with repeat all pin option ticked in
spy define tab and done the steps as in the help vedeo
and tried with differnt baud rate in the exe too

same result" connecting mobile phone.
>>initinitial error!"
let me anticipate
help

regards,
NEIL

Hello sir.
first of all watch vepro video help located in help directory.
regarding this >>initinitial error!
under spy define bar click on "Repeat all pins" then click on spy define.
1000% solution.

[cellbhai]

Dear khadim100,some of iphone read pin out properly but sw not give info or read flash.Error msg says cpu id;966302 then currently not support.any othr sw to read flash,formate?

[NGA NGA BOY]

dear mates,

when ever tryig with MTK software here with a 6300

connecting mobile phone.
>>initinitial error!

always this error ocuures
but it can do spy and define pin from this fone
i tried re spy with repeat all pin option ticked in
spy define tab and done the steps as in the help vedeo
and tried with differnt baud rate in the exe too

same result" connecting mobile phone.
>>initinitial error!"
let me anticipate
help

regards,
NEIL


difine if what cable did you use...

to connect your phone

set your cable sir........to initialize your phone








br

[mhassanrazabj]

Hello sir.
first of all watch vepro video help located in help directory.
regarding this >>initinitial error!
under spy define bar click on "Repeat all pins" then click on spy define.
1000% solution.



i used all these things by repeating all pins but still error in some mobile not at all.
plzzzzzzzzzz helpppp me if any other way is passible

[khadim100]

Dear khadim100,some of iphone read pin out properly but sw not give info or read flash.Error msg says cpu id;966302 then currently not support.any othr sw to read flash,formate?

other ways i also have infinity box . i dont face these problems on it.

[minhtrimobile]

many info for china mobile ,pls visit here!

http://dalatgsm.com/forums/forumdisplay.php?f=145

[waled descovery]

its a very good idea

[PRINCE MOBILE]

frist c:\xintelbox\program\vemtk6226 and delate all file after extrect attech file and then paste in c:\xintelbox\program\vemtk6226. your problem 100000% solve.

[hooi76]

i can detect the ADI phone, but i can not read flash for ADI chips. how?

[Tahir Anwar]

How To Unlock Chinese Mobile ?

[clinx]

How To Unlock Chinese Mobile ?
just format it, tested by me!

[khadim100]

How To Unlock Chinese Mobile ?


simply download this MTK Unlocker from this link.
http://www.driveway.com/6FwjjyQolx
& direct unlock any mtk phone. 100% results. "format" is not a better solution because if we got a mobile with only phone lock & also have a problem of touch screen (if not repairable) if we do format this phone . after successfuly format the phone --power on phone . phone collobration (touch screen test) now phone not pass this test because of bad touch screen glass. use unlock method first.

[hooi76]

how about my adi chip problem,

[breeze007]

There is a new product here ,it has more funtion than vepro box , it can spy usb and support all China phones,
VEKING BOX .......... a good box .. www.xintel.com.cn .
IF you are interested in it , you can contact this msn: vesoft@hotmail.com .

[ahmadge]

some body help me i have VeProbox some time spy define successfull but some time not why pleas help me pleazzzzzzzzzzzzzzzzzzzzzz

[PRINCE MOBILE]

Ve/ve Pro/xintel Your Product Not Support For Usb Define Your Viceasy Company Ruls A No Upgrade Just Purches A New Box.
(1) What Is Feture Our Box Without Upgread?
(2) Why Purches Your Product?

I HAVE XINTEL-BOX. DO U HAVE ANY UPGREAD OR PROSEGER CONVERT MY XINTEL-BOX INTO VE-KING?

IF YES. SEND DETAIL IN FORUME.

[rk_grover77]

prince mobile is right. there should be some way to upgrade vepro to veking. but to whom wer saying that. no support yet.

[breeze007]

some body help me i have VeProbox some time spy define successfull but some time not why pleas help me pleazzzzzzzzzzzzzzzzzzzzzz


if can't spy define ,what is the error of it occured ?
try to tick up "repeat spy " ,or change to "all pins ",then higer the spy time to 1000ms.

[miki-ve]

i can detect the ADI phone, but i can not read flash for ADI chips. how?


try to read original flash V2.17

[nanfanghongke]

Please we needed someone good and exprienced in the use of this ve-pro software to kindly assist us in the perfect way to uses the software perfectly in the area of formatting and flashing cos i bought the ve-pro plus box can not connect or detect phones.

hi bro,.please contact this msn : vesoft@hotmail.com he will help you .

[ahmadge]

any body have xintelbox pin out with colour wise pleazzzz

[ahmadge]

any body have xintelbox pin out tx rx gnd with colour wise pleazzzz

[tundenike]

vepro has done well but just need to provide flash files for us to use

[ahmadge]

whats colour tx rx gnd xintelbox help pleaz any one plleazzzzzzzzzzzzzzzzzzzzz

[suwaree]

good box n78 2 cpu

http://img218.imageshack.us/img218/4116/img0066aoo1.jpg
http://img527.imageshack.us/img527/922/img0074ahe3.jpg
http://img218.imageshack.us/img218/2171/img0075ang6.jpg
http://img218.imageshack.us/img218/2547/vek1gm1.png
http://img220.imageshack.us/img220/8472/vek2xq9.png
http://img220.imageshack.us/img220/6527/vek3ql4.png

[nanfanghongke]

good box ...support USB pin finder!!!!
http://www.xintel.com.cn/download/Self-development/2008-05-24/1211597974d397.html

[wasim_vk]

vepro box active code please help me waseem_vk@yahoo.co.in

[.::skybird::.]

vepro box active code please help me waseem_vk@yahoo.co.in
Dont show your E-mail adress in your post read the rules & be careful!!!










regards

[gsm-world]

when v pro formating when the set well ded.this deivce than no more cable.and this cable have connect no both box infinet then it working. so the infinet box is the best.... for working

[khadim100]

i got china 6300 (Q7+) for restart problem at sim. open mobile & find correct rx tx gnd & make connections . when i click on spy define button this message appear allways "Vcc and Gnd Read Fail!" . i done lot of mobile of this brand simply format. any one help me

[suntysunty]

wait till new update

thanks