View Full Version : FG Team please help me problem unlock W200 CID51
bimson22vn
03-03-2008, 04:56
I use Module SET-FUT BETA ver 1.0.0.1051 unlock W200 CID51(FGBox Support unlock).But don't unlock.I did use DCU-10 , DCU-60 and RJ-45 cable but only DCU-60 working(working read info and customize).FG team Box please help me ! (Sorry,very bad English:D)
Thank's
NADEEM GONDAL
03-03-2008, 06:53
ur fone is supported for unlock,
download this main file,, W200_CXC1250719_generic_ME_R4GB001_RED51.fw
from here,,
http://www.gsm-hacking.eu/files/inde...D51%2FR4GC012/
use rj45 fg port
1. remove rsa
2.select unlock,give main file and then do job
for this procedure u must have 1 credits.
u fone will be unlock 10000000% ok
sharaz191
03-03-2008, 07:49
you have to use FG with K750 cable not usb for unlock
k750 with 9v
bimson22vn
03-03-2008, 09:17
ur fone is supported for unlock,
download this main file,, W200_CXC1250719_generic_ME_R4GB001_RED51.fw
from here,,
http://www.gsm-hacking.eu/files/inde...D51%2FR4GC012/
use rj45 fg port
1. remove rsa
2.select unlock,give main file and then do job
for this procedure u must have 1 credits.
u fone will be unlock 10000000% ok
Thank's for reply
Please see picture 2.I did remove RSA.But Module Not Working !
I with 40 credits for FGBox
bimson22vn
03-03-2008, 09:23
you have to use FG with K750 cable not usb for unlock
k750 with 9v
You have sure use baterry power 9V ?
NADEEM GONDAL
03-03-2008, 09:34
Thank's for reply
Please see picture 2.I did remove RSA.But Module Not Working !
I with 40 credits for FGBox
plese dont use dcu60 because it not work for unlocking use serial port.
:):):)
bimson22vn
03-03-2008, 09:59
I with use serial cable power baterry 4V but not working :confused:
sharaz191
03-03-2008, 12:13
I with use serial cable power baterry 4V but not working :confused:
Ok...Read this
1.Use K750 cable with 9v.9v must use for k750 cable not for main board
2.Use full charge battery for unlock
3.9v and phone battery must for unlock through FG
bimson22vn
03-04-2008, 02:47
Not working :
Press Power On shortly !
Phone detected ...
UNSUPPORTED MODEL !
Error ... !
Operation Time - 00:00:07
do i have to put 9v on the k750 cable????
i must have k750 w/9v supply and full charge batery??
bimson22vn
03-04-2008, 04:29
yes,i did use 9V on cable K750 and chager full batterry on phone
bimson22vn
03-04-2008, 05:04
Hix,I did change serial cable but connect server erro.FG team please help
Press Power On shortly !
Phone detected ...
Loading ...
Loader version:
070129 1112 NGUCXC125872_DB2010_PRODUCTIONIDLOADER_P4D
[PHONE DETAILS]
Baseband IC ID: 8040
Protocol ver.: 0301
OTP Cert. ID: 51
OTP Lock Stat.: 1
OTP Imei : 354269012***xx PAF: 1
Color : RED
Erom Cert. ID : 51
Flash Chip ID : 2019
[FLASH INIT STARTED]
Completed ... Restarting.
Press Power On shortly !
Phone detected ...
Loading ...
Loader version:
061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
[FLASH INIT ENDED]
[CS AUTH STARTED]
Loading ...
Loader version:
061027 1446 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B004
Connecting to server...
Asking server for access ...
ERROR: Authentification failed !
[CS AUTH ENDED]
Disconnected.
[SECURITY BYPASS END]
Error ... !
Operation Time - 00:00:30
same on my k320i cid 50
Press Power On shortly !
Phone detected ...
Loading ...
Loader version:
070129 1112 NGUCXC125872_DB2010_PRODUCTIONIDLOADER_P4D
[PHONE DETAILS]
Baseband IC ID: 8040
Protocol ver.: 0301
OTP Cert. ID: 50
OTP Lock Stat.: 1
OTP Imei : 356706019***x PAF: 1
Color : RED
Erom Cert. ID : 50
Flash Chip ID : 897E
[UNLOCK START]
Press Power On shortly !
Phone detected ...
[UNLOCK END]
Error ... !
Operation Time - 00:00:13
.:hack3r2k:.
03-04-2008, 10:35
Hix,I did change serial cable but connect server erro.FG team please help
Press Power On shortly !
Phone detected ...
Loading ...
Loader version:
070129 1112 NGUCXC125872_DB2010_PRODUCTIONIDLOADER_P4D
[PHONE DETAILS]
Baseband IC ID: 8040
Protocol ver.: 0301
OTP Cert. ID: 51
OTP Lock Stat.: 1
OTP Imei : 354269012***xx PAF: 1
Color : RED
Erom Cert. ID : 51
Flash Chip ID : 2019
[FLASH INIT STARTED]
Completed ... Restarting.
Press Power On shortly !
Phone detected ...
Loading ...
Loader version:
061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
[FLASH INIT ENDED]
[CS AUTH STARTED]
Loading ...
Loader version:
061027 1446 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B004
Connecting to server...
Asking server for access ...
ERROR: Authentification failed !
[CS AUTH ENDED]
Disconnected.
[SECURITY BYPASS END]
Error ... !
Operation Time - 00:00:30
I thin k is easy to see ERROR: Authentification failed !. Means you didnt activated ur se module. One reason is your box is older then 1 year so it expired and you cannot do it anymore or your box is new and you are too lazy read instructions and see how to.
Br;)
.:hack3r2k:.
03-04-2008, 10:37
same on my k320i cid 50
Press Power On shortly !
Phone detected ...
Loading ...
Loader version:
070129 1112 NGUCXC125872_DB2010_PRODUCTIONIDLOADER_P4D
[PHONE DETAILS]
Baseband IC ID: 8040
Protocol ver.: 0301
OTP Cert. ID: 50
OTP Lock Stat.: 1
OTP Imei : 356706019***x PAF: 1
Color : RED
Erom Cert. ID : 50
Flash Chip ID : 897E
[UNLOCK START]
Press Power On shortly !
Phone detected ...
[UNLOCK END]
Error ... !
Operation Time - 00:00:13
Not hard to use 'Search...' and and document yourself. You must REMOVE RSA before.
Br;)
bimson22vn
03-04-2008, 11:01
I thin k is easy to see ERROR: Authentification failed !. Means you didnt activated ur se module. One reason is your box is older then 1 year so it expired and you cannot do it anymore or your box is new and you are too lazy read instructions and see how to.
Br;)
NO no.Please see picture
Press Power On shortly !
Phone detected ...
Loading ...
Loader version:
070129 1112 NGUCXC125872_DB2010_PRODUCTIONIDLOADER_P4D
[PHONE DETAILS]
Baseband IC ID: 8040
Protocol ver.: 0301
OTP Cert. ID: 50
OTP Lock Stat.: 1
OTP Imei : 35670601***xx PAF: 1
Color : RED
Erom Cert. ID : 50
Flash Chip ID : 897E
[UNLOCK START]
Press Power On shortly !
Phone detected ...
Security defeated !
Loading ...
Loader version:
DB201X_INSIDE - FuriouSTeaM
Checking file ...
Getting file firmware info ...
Firmware info: prgCXC1250683_CHINA_MA-R4GC012
Gathering phone firmware info ...
Firmware info: prgCXC1250683_CHINA_MA-R4GC012
Phone unlocked !
[UNLOCK END]
Operation Time - 00:01:26
hehehe unlock done!!!!!!
FuriouS TeaM
03-04-2008, 13:26
Try now please is ok.
br.
Steve.
hrkgloballinks
03-04-2008, 15:29
I thin k is easy to see ERROR: Authentification failed !. Means you didnt activated ur se module. One reason is your box is older then 1 year so it expired and you cannot do it anymore or your box is new and you are too lazy read instructions and see how to.
Br;)
I got my furious gold purposely because it supported sonnyericson.But I was unable to connect.It kept given error.I have 40 logs on it and am using module 3.I was able to connect other phones that fg support but not sony ericson.What steps do I need to take.I also understand the server do not support firmware for sony ericson.where do we get the files.
Thanks for the support you gave on alcatel e221.
hrkgloballinks
03-04-2008, 15:37
Press Power On shortly !
Phone detected ...
Loading ...
Loader version:
070129 1112 NGUCXC125872_DB2010_PRODUCTIONIDLOADER_P4D
[PHONE DETAILS]
Baseband IC ID: 8040
Protocol ver.: 0301
OTP Cert. ID: 50
OTP Lock Stat.: 1
OTP Imei : 35670601***xx PAF: 1
Color : RED
Erom Cert. ID : 50
Flash Chip ID : 897E
[UNLOCK START]
Press Power On shortly !
Phone detected ...
Security defeated !
Loading ...
Loader version:
DB201X_INSIDE - FuriouSTeaM
Checking file ...
Getting file firmware info ...
Firmware info: prgCXC1250683_CHINA_MA-R4GC012
Gathering phone firmware info ...
Firmware info: prgCXC1250683_CHINA_MA-R4GC012
Phone unlocked !
[UNLOCK END]
Operation Time - 00:01:26
hehehe unlock done!!!!!!
How do you get it connected
.:hack3r2k:.
03-04-2008, 17:04
I got my furious gold purposely because it supported sonnyericson.But I was unable to connect.It kept given error.I have 40 logs on it and am using module 3.I was able to connect other phones that fg support but not sony ericson.What steps do I need to take.I also understand the server do not support firmware for sony ericson.where do we get the files.
Thanks for the support you gave on alcatel e221.
For flashes www.gsm-hacking.eu/files . As for those 40 free logs you must activate them from your support area. On soft you go COUNTERS/ASK REFILL. String you get there you enter inside your support area. When a reply is givgen you go COUNTERS/USE REFILL and paste there received string and press ok. IF all good no error will eb received.
Br;)