View Full Version : 7650 cable
Anyone know where to get one? where does it plug into, cant see a datastyle connector, unless its like the T191..
Cheers,
Nick
The reason why you cant see the connector is because its hidden behind the plastic casing.
If you are brave, slide the plastic casing protecting the lens of the camera more than it can go.
The connectors for a cable are right below the lens!
the1
Havent got the 7650 anymore, is it the same as any other Nokia, or completely different?
Hi,
You need to open the Grid and put 2 small screwdrivers into the holes careful pushing the plastic clips inside, this will release the
Grid to service position.
Dont take it out - just slide it down for 2 cm, but make sure you
push the clips with the screwdrivers. This is the only way to access the service conector for any Mbus or Flashing.
BR
Burnt Cobba
07-30-2002, 16:43
jsut to ask where to get a suitable connector for this beast??
seems it wil be a nightmare to play with it. Dotn wish to screw up $800 ...... i will be shot
alv
Originally posted by Bph&co
Hi,
You need to open the Grid and put 2 small screwdrivers into the holes careful pushing the plastic clips inside, this will release the
Grid to service position.
BR
What "holes" you mean? A picture with arrows would be great ;)
At least in mine, there is several holes which could be plastic clips when pushed hard enough.
And what about cables and the protocol in it
through that connector?
Hi,
I mean the holes of the two channel from both sides - where the
Grid slides.
Usually the connector comes with a opening tool. But this is not needed. Simple pushing a thin stick into the channel hole under
the Grid side which slides will release the Grid to service position
which is about 2cm down from normal.
After some practice you can open your 7650 with bare hands - at
least I open my one like this.
Sorry I cant make pictures - have only one phone :)
Best Regards
Hi,
Or you can use the new opening tool by JIC :
http://www.cellularrepairs.co.uk/biometric.jpg
I hear there is limited stock!!
:D :D :D
LOLOLOLOL
Thats a good one!!! =)
Hi,
The way I personally remove it is by pushing a toothpick down either side of the phone.
This will allow you to slide the covers off very easily!
No scratching of the phone or any danages!
Have fun!!!
:D :D :D
ADAMRYANREST
08-22-2002, 17:29
Hello M8's
@J
Have You Got This Datacable Manurfactured Yet ??
If So When Are They Avalible For Purchase ??
Best Regards
Adam Rest
Vast Gsm Team
E-Mail:
VastGsmUnlocking@NtlWorld.Com
Sales@VastGsm.co.uk
Tekdis.com
08-23-2002, 12:27
hi
7650 cables make it ur self 1, 3210 f/m bus datacable {change the pinouts to match 7650}
thats all done ! tested 1000%
Abbas
@@Tekdis.com
great idea
thanks man