W200 error Unlock in stage 1 !

[BelMobi]

--- Reading Info---------------------------------------------------------------
User selected phone W200 using Normal boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357354-01-624663-9
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Warning : Missing some security records in GDFS.

Done.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357354-01-624663-9
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357354-01-624663-9
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Error : Failed.

Phone is New and working any sim.
What is this "Warning : Missing some security records in GDFS."

[piracik]

don't have this box but as far as i know Db2012 CID52 not supported by any box - only via logs

[BelMobi]

After flash SETool. All OK.

- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 357354-01-ххххх-9
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Stage 1 completed succesfully
Done.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Timeout detected
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone W200 using Test Point boot mode
Stage 2 start
Hint : Now the probe might be disconnected
Processing...
Entering Security Bypass mode ...
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
Baseband Chip ID = 8040
Phone ID = 2380EA7315708198
Finalizing ...
Stage 2 completed succesfully
Done.

--- Unlock and Repair----------------------------------------------------------
User selected phone W200 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
Baseband Chip ID = 8040
Phone ID = 2380EA7315708198
Reading GDFS...
Testing security ...
GDFS 0013 Hash OK
GDFS 0006 Hash OK
GDFS 000E Hash OK
GDFS 001C Hash OK
Unlocking ...
Testing security ...
GDFS 0013 Hash OK
GDFS 0006 Hash OK
GDFS 000E Hash OK
GDFS 001C Hash OK
Generating GDFS...
Writing GDFS...
Done.

[GSM Dream]

Hello BelMobi!
Thank you for report.
But why did you use a Setool for flashing? You could use our program for this ;)

[rzeszu]

I have the same problem, nothing help.
flashed with dreambox and setool and nothing change

User selected phone W200 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 356196-01-490601-6
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Error : Failed.

[rzeszu]

ok.
now all works but I must gdfs write by setool
br Mariusz