View Full Version : k550 keypad
korutgsm
03-05-2008, 12:44
pleasa picture k550 keypad ic
korutgsm
03-08-2008, 09:42
pleasepleaseplease!!!!!
doberman1979
04-08-2008, 16:05
just change keeboard flex and be ok.
changed already but cannot.. keypad ic ??
libra202
06-04-2008, 07:59
This solution is for no keypad w610 or k550i...
1. check and clean conector keypad to board
2. measure the continuity of the tracks
3. replace board keypad
4. check switch closed (key volume, play, stop etc)
but if not none of that
replace chip db20xx internal esd proteccion "MARIKA_SECURITY_EFUSE"
100% solution!!!
luck to all!!!:)
dianneangela05
06-06-2008, 12:27
where can i find the keypad ic?can you show me where it is?tnx
nabil_alg
07-11-2008, 19:36
any solution for this probleme plz i have the same difault
nabil_alg
07-13-2008, 18:32
hello
no onz can help me
nabil_alg
07-14-2008, 18:00
3 day and no answer ummm i think it's time to go to sea
morteza-icu
07-16-2008, 12:52
3 day and no answer ummm i think it's time to go to sea
my friend k550 have not key pad ic and keypad way go to cpu from keypad connector .if your uif and connector are good.you should change cpu and flash and do empty fill with setool
click on thanks bottom for more help
nabil_alg
07-16-2008, 13:41
my friend k550 have not key pad ic and keypad way go to cpu from keypad connector .if your uif and connector are good.you should change cpu and flash and do empty fill with setool
click on thanks bottom for more help
in the first thank you br for help and i have solved the probleme it was in the soket key of the mothe board
thank you again for answer and this is a big thank
thank youuuuuu
nabil_alg
07-16-2008, 13:43
my friend k550 have not key pad ic and keypad way go to cpu from keypad connector .if your uif and connector are good.you should change cpu and flash and do empty fill with setool
click on thanks bottom for more help
in the first thank you for answer
i find the probleme in the soket key of th pcb
and this is a big thank
thank youuuu
morteza-icu
07-21-2008, 11:15
for thanks click on thanks bottom
nabil_alg
07-21-2008, 11:39
for thanks click on thanks bottom
i solved this probleme by resolding the soket
but the probleme now is that when i put he battery the key led take on withot power on the phone