Need Pinout Anycall 5200+

[igi85]

Need Pinout Anycall 5200+












Thank U

[InfinitySupport]

Dear Friend,

There are different "Chinese" phones with the same name but absolutely different hardware exist on market.
Example: exist at least 30 "Chinese" phones with name "N95", at least 20 models "N73" etc. but all models has difference in hardware,
different bottom connectors, different pinouts and and has different firmware, so it's impossible to
give any advice about phone pinout only by phone name.
So we recommend you to include the next information in your request regarding pinout:

1. detailed description of model: brand name, model name, complete text from phone back label, any other marks that you can find on phone cover
2. phone CPU chip name
3. phone PCB photo (Rx/Tx/Gnd test-points may exist on phone PCB)
4. attach phone photo
5. attach phone bottom connector photo
6. include information about Gnd and Charge pins on phone bottom connector

After you have this information prepared, you can find pinout by yourself more easy than before,
just check the next detailed description how to get pinout for your model:

1. use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
2. if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle\
3. if not helps, please read: http://www.gsmhosting.com/vbb/showpost.php?p=2212036&postcount=7
4. if not helps, please read: http://www.gsmhosting.com/vbb/showthread.php?t=433447
Universal solution for pinout detection: http://www.infinity-box.biz/index.php?id=pinfinder&lg=en

[Moderate]

Need Pinout Anycall 5200+

Thank U


Open the Phone and check it,if it is SKY then forget it to repair with Infinity at present.Cause it doesnt support.Wait for the updates.

This mobile has Two different CPU's.......

Regards,
:D

[.:R-mitik:.]

its printed on main board and its 6226 supported by infinity!!!!!!!!!!!!!!!!!!!


Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: 998P_L0145_V1P2_JD9320B16_7670_SAM
Software version: HM998PLUS_PCB2p0"
Software date: 2005.04.12
Barcode: MT012345678901234567
imei: 352869600223988
Finished, time used: 4 sec
Power off phone now !

[InfinityHelp]

hello!

this is good. this phone is supported by infinity.
but you still did not answered question regarding connector type.