THE RIGHT WAY TO UNLOCK j750

[herbie_ma]

1. Start the latest EU version (2.50 at this moment).

2. Use special easyunlock cable (rj45 and usb cable in one) and you don't need to modify the cable!!!

3. connect cable in phone without batteri and without simcard

Very important that u only connect the RJ45 cable and NOT the usb cable!!!
this is very important!!!! and that's why many pple have problems unlocking there J750.

so only RJ45 part, and NOT the USB part of the cable!!!

4. choose J750 in the program

5. choose the right com-port

6. press start and insert battery (don't need to do anything ells)

now wait until the EU calculate the codes,,,it can take somtime just wait,,

it's depending on how bzy server is.

gooooooooooooood Luck,,,,,,,:)

[menarakech]

Thanks for sharing.....very good way to unlock this model.

[BouRRi_GSM]

all is right, u don't need any usb connection, all is in software, it's asking to power on the phone, no search for connected phone :D

[boucettay]

but what about wrong code
is there any solution
some people wrote +2 last digit, -2 sec digit???
any idea

[higherzman]

1. Start the latest EU version (2.50 at this moment).

2. Use special easyunlock cable (rj45 and usb cable in one) and you don't need to modify the cable!!!

3. connect cable in phone without batteri and without simcard

Very important that u only connect the RJ45 cable and NOT the usb cable!!!
this is very important!!!! and that's why many pple have problems unlocking there J750.

so only RJ45 part, and NOT the USB part of the cable!!!

4. choose J750 in the program

5. choose the right com-port

6. press start and insert battery (don't need to do anything ells)

now wait until the EU calculate the codes,,,it can take somtime just wait,,

it's depending on how bzy server is.

gooooooooooooood Luck,,,,,,,:)



HELLO

the problem are not on cable u can use C180 cable it work perfectly the problem are the code who EUB give are not accepted by the phone

BR

[herbie_ma]

HELLO

the problem are not on cable u can use C180 cable it work perfectly the problem are the code who EUB give are not accepted by the phone

BR


Sorry bro I never had this problem,,,

[aErOm]

all is right, u don't need any usb connection, all is in software, it's asking to power on the phone, no search for connected phone :D

As many times said, this is not SOFTWARE PROBLEM but phone Is... if phone is WRONG MADE... what to do then?

thanks for understanding.

[DOUHAL]

1. Start the latest EU version (2.50 at this moment).

2. Use special easyunlock cable (rj45 and usb cable in one) and you don't need to modify the cable!!!

3. connect cable in phone without batteri and without simcard

Very important that u only connect the RJ45 cable and NOT the usb cable!!!
this is very important!!!! and that's why many pple have problems unlocking there J750.

so only RJ45 part, and NOT the USB part of the cable!!!

4. choose J750 in the program

5. choose the right com-port

6. press start and insert battery (don't need to do anything ells)

now wait until the EU calculate the codes,,,it can take somtime just wait,,

it's depending on how bzy server is.

gooooooooooooood Luck,,,,,,,:)

tested but WRONG Codes :
Phone info:
~~~~~~~~~~~

Phone Model: Unknown
IMEI: 356594011475805

Connected to server

Unlock codes:
-------------

UNLOCK NETWORK LOCK: #7465625*638*64949107#

Enter codes WITHOUT simcard inside the phone.
You can check the current lock status using this code: *#7465625#


Disconnected from server

[ABDELFATTAH NET]

I will test and post result and hope this solution will end my problem with j750
thinx for sharing info br
abdelfattah

[EMINEMGSM]

tested but WRONG Codes :
Phone info:
~~~~~~~~~~~

Phone Model: Unknown
IMEI: 356594011475805

Connected to server

Unlock codes:
-------------

UNLOCK NETWORK LOCK: #7465625*638*64949107#

Enter codes WITHOUT simcard inside the phone.
You can check the current lock status using this code: *#7465625#


Disconnected from server


No wrong codes friend, it's phone simlock problem, code 100% correct and you can check with any other solution you will get the same code.

[BouRRi_GSM]

As many times said, this is not SOFTWARE PROBLEM but phone Is... if phone is WRONG MADE... what to do then?

thanks for understanding.

i know, u are right because code coming from provider are same

i'm just talking to people who don't see software when asking to Power on the phone, this is mean URTA connection not USB one.

anyway, i done some J750 from orange fr with success, maybe i'm lucky with software version of phones i got :D


br :)

[EMINEMGSM]

i know, u are right because code coming from provider are same

i'm just talking to people who don't see software when asking to Power on the phone, this is mean URTA connection not USB one.

anyway, i done some J750 from orange fr with success, maybe i'm lucky with software version of phones i got :D


br :)

I see You are lucky man;)

[Nokall]

No wrong codes friend, it's phone simlock problem, code 100% correct and you can check with any other solution you will get the same code.

No it´s not when you have a phone try to connect in kulandi and see :D

some times phones say code mismatch but code are correct , so you must put 4 times other code and put again code made by EU.
The solucion it´s when you put phone in Boot like kulandi does.

[hack24_gsm]

Hy! It worked for me....with vers 2.51....I used only rj45(from special cable E210)...and the codes were good....nice work EU TEAM. keep it up!




hack24_gsm@yahoo.com ;)

[aErOm]

for Broadcomm phones better use Easy Unlocker 1.60 and do DIRECT UNLOCK this is ACTUAL BEST WAY to make any broadcomm phone
Best regards !!!