View Full Version : d-one dm189 pinout
gsm_enggine
03-15-2008, 08:10
anybody have this pinout????
in my infi pin adapter can't find this pin
please help me....
this phone is dual mode on
and spansion chip flash
thx
InfinityHelp
03-15-2008, 11:47
hello!
is it MT62xx MCU based?
if you doing all correctly, but pinout finder can not detect pins- this means there is no Tx/Rx pins in system connector.
you must look for test points on PCB.
InfinityHelp
03-15-2008, 11:48
hello!
also, always post a connector type when request for pinout help
gsm_enggine
03-17-2008, 06:33
sory if my info is not completly
this the specification
conector : 24pin (L24A)
chip : spreadtrum sc6600D5-18OG
this the info log
software version: 1.06
cable type: 1x24 (L24A)
platform: SPD: Spreadtrum
searching adapter at COM16...
adapter found, version: 2000
pins: 24, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now (not required but recommended) !
detecting pins...
failed to detect pins
time required: 30 sec
Power Off !
in the board pcb rx/tx text is nothing
please help me to find it!!!!
thx
br.
InfinityHelp
03-17-2008, 11:12
hello!
at very beggining of pinout search, according to user manual, do you able to power On phone from box?
xiangmdn
07-23-2008, 15:05
try this pinout :
4 = GND
5 = RXD
6 = TXD
24 = VCC
tested by me :) oke
zoland_hole
11-05-2008, 13:57
I Need This Firmware DM189 TY-INHV2.07-070709NUS-WAP-MIB_boot
Please Upload
Thanks
InfinitySupport
11-05-2008, 20:42
Hello,
We will be glad if somebody can send this kind of full flash from good working phone to InfinityBoxSupport@gmail.com so we will be able to upload good files for all users in support area.