amit123
03-21-2008, 15:45
Hello Mates,
Can anybody help me in removing the fault of one SAMSUNG SGH-X210 mobile phone which is absolutely clean and untouched with Power on OPENING SCREEN X210 LOGO fixed, then nothing is happening. I tried to flash it with accurate files taken from another working X210 phone but showing me the following message :
SAMSUNG SGH-X210 FLASHING ERROR
-------------------------------
Region: 1, 0x00000000-0x000006C7, Length: 1736 bytes
Region: 2, 0x00004000-0x00006773, Length: 10100 bytes
Region: 3, 0x00020000-0x00020003, Length: 4 bytes
Region: 4, 0x00021000-0x00A12213, Length: 10424852 bytes
1st Boot Ok, McuId: 000603EE, Rom: 00004B45, 5-1.0 (Trident 2)
2nd Boot Ok, McuId: 000603EE, Rom: 00004B45, 2-1.1
Fll Boot Ok, Vers: 5.13, fl_sceptre3_nice_std_v24_polaris_buffer.sre
Flash1: Fl_Id: 00FF0000_FFFF0000 -
Flash1: Unknown Metrics
Flash2: Fl_Id: 00FF0000_FFFF0001 -
Flash2: Unknown Metrics
Baud Rate Set: 460800 bps
Flashing NOR part...
ErOpen: xV4?6e.
Bad response: 0x0000, 0000
Write Failed at: 0x000006C8
What to do? What's the fault? Pls. share.
Advance thanks to all.
amit123
Can anybody help me in removing the fault of one SAMSUNG SGH-X210 mobile phone which is absolutely clean and untouched with Power on OPENING SCREEN X210 LOGO fixed, then nothing is happening. I tried to flash it with accurate files taken from another working X210 phone but showing me the following message :
SAMSUNG SGH-X210 FLASHING ERROR
-------------------------------
Region: 1, 0x00000000-0x000006C7, Length: 1736 bytes
Region: 2, 0x00004000-0x00006773, Length: 10100 bytes
Region: 3, 0x00020000-0x00020003, Length: 4 bytes
Region: 4, 0x00021000-0x00A12213, Length: 10424852 bytes
1st Boot Ok, McuId: 000603EE, Rom: 00004B45, 5-1.0 (Trident 2)
2nd Boot Ok, McuId: 000603EE, Rom: 00004B45, 2-1.1
Fll Boot Ok, Vers: 5.13, fl_sceptre3_nice_std_v24_polaris_buffer.sre
Flash1: Fl_Id: 00FF0000_FFFF0000 -
Flash1: Unknown Metrics
Flash2: Fl_Id: 00FF0000_FFFF0001 -
Flash2: Unknown Metrics
Baud Rate Set: 460800 bps
Flashing NOR part...
ErOpen: xV4?6e.
Bad response: 0x0000, 0000
Write Failed at: 0x000006C8
What to do? What's the fault? Pls. share.
Advance thanks to all.
amit123