Nokia 5310 Xm (rm-303) Firmware Update New Version 05.81

[flamekeeper]

http://www.iopb.res.in/niser/pix/new_animated.gifNOKIA 5310 (RM-303) FIRMWARE UPDATEhttp://www.iopb.res.in/niser/pix/new_animated.gif
NEW VERSION 05.81


NOTE: Only RM-303 products. NO RM-304 compatibility . To find out which code is your cellphone dial*#0000#.

The most radical change you'll get is a SIGNIFICATIVE increase of ringing or loudspeakers volume, I can really assure you there's a HUGE difference !!!


Follow general steps and ONLY those identified with your cellphone COLOR

Programs required:

-Nemesis Service Suite Beta 1.0.38.12 (NSS) (http://www.b-phreaks.co.uk/files/NSS/NSS103812.zip)
-Nokia Software Updater (NSU) (http://europe.nokia.com/A4579163)

Files required:
-http://rapidshare.com/files/98122535/N5310_flash_files.rar.html (Nokia 5310 red color)
-http://rapidshare.com/files/100317421/N5310_blue_flash_files.rar.html (Nokia 5310 blue color)

PRIOR NOTE : Remember always have your phone FULLY CHARGED and SIM instaled. Otherwise you can get a nice paperweight!!!. Confirm you have good internet speed and disable your screensaver or program it for 1 hour delay.

1)-Connect your phone to PC using USB cable (choose PC Suite mode on your phone) and if needed wait for driver installation. The cellphone should always be powered-on and Normal profile activated.


2)-Backup all your info from your phone, via PC Suite or using Backup option to your phone's microSD.

3)-Close any Nokia software or other that uses your phone.

4)-Open NSS, click on magnifying glass icon (right upper corner).

5)-Click on Nokia 6600 icon (Phone Info)

6)-In the block "Actions" click "Scan" button (the cellphone info should be displayed on the left text zone)

7)-In the block "Production Data Edit" click "Read" button. (Some cells will fill with info). NOTE: It's recomended to save/write and later restore this numbers once actualization is done in order to leave the phone with its original codes.

8)-In the "Product Code" option checkmark "Enable" box. Erase the numbers showed (generally they are like 05*****), write the new code which is gonna be:


0546968 (Nokia 5310 red color)
0548679 (Nokia 5310 blue color)


Click on "Write" button and wait until the word "Done" is displayed on the message state box in left lower corner.

9)-Close NSS.


10)-Open folder: C:\Documents and Settings\All Users\Application Data\Nokia\Nokia Service Layer\A\nsl_service_module_00001\vpls\www.dsut.onl ine.nokia.com.oti.caresuite\Products\rm-303
IMPORTANT: Application Data folder is a hidden system folder so you'll have to activate the "show hidden folders" option of your OS in order to access it. I recomend using Start>Run option and copy/paste the address shown to access directly to the folder.
Windows Vista users: the folder addres is: C:\ProgramData\Nokia\Nokia Service Layer\A\nsl_service_module_00001\vpls\www.dsut.onl ine.nokia.com.oti.caresuite\Products\rm-303
In case you find any file you must erase ALL. This folder should be completely empty!! Do not close the folder window 'cause you will use it again..

11)-Open NSU. Click om "Start", then "Next". The software will give you two possible messages: (1) that you already have installed the latest version but if you wish you can REINSTALL it, or (2) that there's a new firmware available for your phone so you can INSTALL it.

12)-Either message shown you'll have to click "ReintalL" or "Install" button.

13)-NSU will start downloading update files (which sizes aprox. 33 MB), that's why it's recomended a good internet speed connection.
HIGHLY IMPORTANT STEPS:
14)-When update progress shows aprox. 26 MB downloaded you must "disconnect USB cable from PC" and let download process to normally ends. Then you'll get a message showing that phone connection is lost or the device is not recognized and will ask for connection RETRY. DO NOT PAY ATTENTION TO THIS, I mean, DO NOT CLICK on ANY button and do not close the software!!!.

15)- Go to folder: C:\Documents and Settings\All Users\Application Data\Nokia\Nokia Service Layer\A\nsl_service_module_00001\vpls\www.dsut.onl ine.nokia.com.oti.caresuite\Products\rm-303 and erase the following files:
(Nokia 5310 red color):
rm303__03.63.image_c_red
rm303__03.63.mcusw
rm303__03.63.ppm_c

(Nokia 5310 blue color):
rm303__03.63.image_c_blue
rm303__03.63.mcusw
rm303__03.63.ppm_c

16)-In the compressed file you'd preaviously downloaded,

N5310_flash_files.rar (Nokia 5310 red color)

N5310_blue_flash_files.rar (Nokia 5310 blue color)

you'll find three replacement files for those you've just erased, copy/paste them to the mentioned folder.

17)-Once you have replaced the files reconect the USB cable to PC and click "Retry" button on NSU window.

18)-The software will begin updating. Let this process to end normaly without touching ANY on the PC or cellphone. This process takes about 15 min. NSU will tell you that version 03.63 installation is correctly completed. What NSU doesn't know is that we replaced the files so don't worry for this message.

19)-The phone will restart and will ask for your SIM code. Maybe it will take a little longer loading but once you get to main screen dial *#0000# and confirm that your new firmware is V 05.81
CONGRATULATIONS!!!

Any questions are welcome!! Regards!! :)

[flamekeeper]

IMPORTANT!!!


Folder adress is:
-Windows 2000, XP Users: C:\Documents and Settings\All Users\Application Data\Nokia\Nokia Service Layer\A\nsl_service_module_00001\vpls\www.dsut.onl ine.nokia.com.oti.caresuite\Products\rm-303

-Windows Vista Users: C:\ProgramData\Nokia\Nokia Service Layer\A\nsl_service_module_00001\vpls\www.dsut.onl ine.nokia.com.oti.caresuite\Products\rm-303

Unfortunately this forum auto-recognizes all the words starting with "www" as a URL link and I was unable to re-edit my previous post!

[divon]

I am a complete newbie. Would that unlock the handset as well?

Thanks.

[cowboy36]

Thank you sir. I've been waiting for this upgrade. What is this 0548679 code for? Mine is 0548826. As much as possible, I dont want to change my product code. Can i upgrade without changing product code? Please help.

Thank you.

[gobindopura]

I am a complete newbie. Would that unlock the handset as well?

Thanks

[vince_1979]

Nice update mate.....more power...

[..::: Naveed :::..]

Thnx for sharing nice work

[..::: Naveed :::..]

I am a complete newbie. Would that unlock the handset as well?

Thanks


No brother it cant unlock u must buy codes from provider

[andre128]

just download 5310 RM-303_DP20_3.00__sw-05.81

then flash with phoenix

[flamekeeper]

Thank you sir. I've been waiting for this upgrade. What is this 0548679 code for? Mine is 0548826. As much as possible, I dont want to change my product code. Can i upgrade without changing product code? Please help.

Thank you.That code is for Euro GSM Zone. Your code is for Asia&Pacific-Philippine GSM Zone...is that right?

There's no problem changing the Product Code because you can latter change it back again to original number following the initial steps with Nemesis Service Software.

What I recommend you my friend is to use Product Code 0558555 and run normally NSU, because for that code firmware 05.91 was officially released and the language pack is the same your phone has right now (English, Chinese, Japanese, Philippine, Vietnamese. With this code you won't have to do anything else but to let NSU normally upgrade your phone. Latter you can change back your original Product Code.

[flamekeeper]

just download 5310 RM-303_DP20_3.00__sw-05.81

then flash with phoenixThis firmware is for Phoenix 2007.44 and there's no crack for that version. It's easier via NSU trick

[therobber]

after update.. is it possible to set the product-code back to its original value?

[cowboy36]

That code is for Euro GSM Zone. Your code is for Asia&Pacific-Philippine GSM Zone...is that right?

Yes, it's for Philippines. Just flashed my 5310 per your instruction in the first post. ringing tones and music playback is loud. Still discovering for more changes.

Thank you flamekeeper...

[cowboy36]

just download 5310 RM-303_DP20_3.00__sw-05.81

then flash with phoenix

flamekeeper's method is much much easier than Phoenix method.

[humayun]

than************ q sir great work

[flamekeeper]

after update.. is it possible to set the product-code back to its original value?Yes, it's possible. All you have to do is the same procedure with NSS. Follow the initial steps and use your original Product Code instead of the code I put on the guide.

If you forgot your original product code then just remove the battery from your phone and you should see a label with some information about the device. You'll find there the word Code, which is an alfanumeric code with 12 characters. Your original Product Code will be a 7-digit code result of the union of the first 6 numbers and the last one. I.E: if you read this

Code: abcdefghijk ---> Your original Product code is: abcdefk

Regards!!:)

[pali2704]

Is it possible to put back a language after upgrading from 3.63 to 5.81 ? In 3.63 I had Romanian, now in 5.81 it's gone.

[flamekeeper]

Nokia had officially released new firmware 05.81 for all Europe, Asia and Australia!!!

pali2704: Now that Nokia released firmware 05.81 for your country you must set back your original Product Code with NSS (you can see how to do it in my previous post). Then just run normally Nokia Software Updater and select the REINSTALL option. The software will update your phone with the correct language pack for Romania. I did that and now I have my correct language pack (Spanish included)

[iabsolveyou]

After reading thru your detailed and useful post, I am unable to find any remedy for my situation. I have a 5310 with the O2 firmware and I am dying to get rid of it! However I cannot change my product code since NSS does not see the phone! What can I do?..

[madao101]

could you compare v05.81 with v03.63?i dont know which version is better

[sojournerx]

Hi,

First, I want to express my gratitude for this forum and its participants. This is a great place to learn.

I recently purchased a Chinese Nokia 5310, and I noticed that a lot of menu functions are not present as they would be on a genuine (Finnish) Nokia 5310.

Thinking that updating the firmware might be a good first step, I followed the instructions in this thread exactly and found that the NSS software (Nemesis Service Suite V.1.0.38.12) always reported an error when I pressed the 'Scan' button. Attempting to write a new product code without a completed scan also ended in a reported error. Additionally, neither Nokia Phone Suite nor Nokia Software Updater detect the phone when it is connected using the USB cable - but the phone does show up as a mass storage device on my computer when I plug it into the USB cable and I can copy files to and from it without a problem.

Would anyone have any advice on what to do to update the firmware and software on this phone? I know that it was an adventuristic gamble to buy a Chinese Nokia, but perhaps someone has had a similar experience and found a solution.

With gratitude,

sojournerx :)

[silviutzu24]

HY
i have a 5310 that has 0560589 code and version 03.63. i have roumanian language on it. pls tell me what code should i write in NSS in order to keep this language. i have to mention that i tried to update the firmware and it says it does'nt exist any update for it with this code.
thx

[mbarros]

Hi,

I need some help, I bought a NOKIA 5310 at vodafone with product code 0558572, it came with software v3.63 I tried to change the producto code to
0548679 wich I guess was the generic (no brand) one and run nokia software update, I get the message saying that a new version was available 5.81 I run it, but I got the phone working with 5.81 (checked *#0000#) but I still have all the vodafone stuff, also my sms were still there, I guess a software update erase everything...

Any thoughts of what happened?

hugs

[gustavofehrenba]

Look. my pc cant recognize the cellphone, this error show in the NSS : -->Please copy the loaders first!
->Products Dir('products').......Not Found.

I think the error is in that products :S can anyone tell me whats is wrong?

Thanks :D

Nice post :D:D:D:D:D

[flamekeeper]

Regards to everybody who had commented here. Let's begin with some responses. First: Nokia released new versions for NSU and PC Suite. Both of them come with the new Nokia Connectivity Cable Driver which is incompatible with NSS and that's why you all get the "error" message when trying to change Product Code (yes, Nokia always making things harder for us!!). So, the solution is uninstalling ALL Nokia software from your PC, particullary using the path Control Panel>Add or remove software. There you will find the new Nokia Connectivity Cable Driver and some "Nokia Flash Cable Driver". You must uninstall too those two in order to be able to install later the old version of Nokia Connectivity Cable Driver which works fine with NSS. You can find it here: http://www.nokia.co.uk/A4841138

Having this cable driver installed then you can change Product Code (use the one according your phone color). Once you've changed it you can install NSU and run it normally. DO NOT PAY ATTENTION TO THE GUIDE'S STEPS FOR NSU UPDATING because the firmware update was officially released for the Product Codes I gave. You won't have to do anything but let NSU run normally, follow all the instruction in the software.


Personalized responses:
sojournerx: If you follow my advices on this post then you can be able to change your Product Code and remove that anoying language pack of your phone.

silviutzu24: If you dial *#0000# on your phone you can see the info about firmware pack installed already on your phone and if you press the "down" navegation button you will see another info concearning the language pack. The last line should be a single letter or a code (like A, B, C or M12, etc). I need to know which letter do you have (if it's C then you can follow my indications on this post and do the normal procedure). Don't worry, all I want is to let you preserve your Rummanian language on your phone. If you don't care then follow my instructions on this post. If you care then reply me so I can give you another Product Code.

mbarros: That's normal because the NSU never remove GSM operator personalization (pitty). The good thing is that you have now a good musical phone with less crashes episodes..and better volume too!!

gustavofehrenba: Your problem is because what I describe in this post. Surely you have the cable driver incompatibility problem. Follow my instructions and you will be fine!

[sojournerx]

Flamekeeper, you are tremendous! Thank you for your excellent guidance and personal attentiveness.

That language pack is indeed annoying - you truly have a vast knowledge of the incarnations of Nokia out there, and I greatly appreciate your helpfulness and time.

Cheers,

sojournerx

[sojournerx]

Hi flamekeeper,

The NSS software (Nemesis Service Suite V.1.0.38.12) still gives me the "error" message when I press the 'Scan' button.

Before starting NSS, I did the following:
1. Uninstalled all Nokia software:
- PC Suite
- Nokia Software Updater
- Nokia Flash Cable Driver
- Nokia Connectivity Driver
2. Uninstalled all Nokia drivers.
3. Scrubbed the Windows XP registry using CCleaner.
4. Installed Nokia Connectivity Cable Driver 6.81.1.2.

When NSS software installs, it presents a screen on which the user can choose one of the following options:
( ) Virtual USB Device
( ) F1 USB Device
( ) Nemesis USB Multi-flashing Device
( ) Diamond protective Device
( ) Prodigy LPT Device

I chose the default option of Virtual USB Device. Is this the right choice?

Thank you for your help so far. Any other ideas that you can share with me would be greatly appreciated!

With gratitude,

sojournerx :)

[richiricherd]

Hi pal.. try it http://www.b-phreaks.co.uk/index.php?main_page=page_2 ;)

[nonearfear]

Flamekeeper, i've done pretty much everything you said and it worked but..no romanian language. So i put back the original code and tried to reinstall and i received the message "No software updates for your phone" and only two options: "try again" and "Cancel". So now, for instance, i have the original code (orange) , software version 5.81 and no romanian language pack.
Oh, one more thing, the language pack is C.
What i have done wrong ?

[renegade]

Flamekeeper, i've done pretty much everything you said and it worked but..no romanian language. So i put back the original code and tried to reinstall and i received the message "No software updates for your phone" and only two options: "try again" and "Cancel". So now, for instance, i have the original code (orange) , software version 5.81 and no romanian language pack.
Oh, one more thing, the language pack is C.
What i have done wrong ?

Choose Euro B (red or blue) from here:
0545809 RM-303 EURO-A SAKURA RED LATIN
0546931 RM-303 EURO-B SAKURA RED LATIN
0546966 RM-303 EURO-C UK SAKURA RED LATIN
0546968 RM-303 EURO-C SAKURA RED LATIN
0546976 RM-303 EURO-C FR SAKURA RED LATIN
0546977 RM-303 EURO-C ALS SAKURA RED LATIN
0546996 RM-303 EURO-C TR SAKURA RED LATIN
0547010 RM-303 EURO-D SAKURA RED LATIN
0547032 RM-303 EURO-E SAKURA RED LATIN
0547036 RM-303 EURO-F SAKURA RED HEBREW
0547037 RM-303 EURO-H SAKURA RED GREEK
0547038 RM-303 EURO-I SAKURA RED LATIN
0547039 RM-303 EURO-I SAKURA RED CYRILLIC
0547040 RM-303 EURO-I RU SAKURA RED CYRILLIC
0547041 RM-303 EURO-I BRMD SAKURA RED CYRILL NY
0547042 RM-303 EURO-I SAKURA RED UKRAINE CYRILL
0547348 RM-303 MEA-1 SAKURA RED ARABIC NY
0547368 RM-303 MEA-2 SAKURA RED ARABIC NY
0547369 RM-303 MEA-3 SAKURA RED LATIN NY
0547371 RM-303 MEA-4 SAKURA RED URDU NY
0547372 RM-303 MEA-5 SAKURA RED FARSI NY
0547375 RM-303 MEA-6 SAKURA RED LATIN NY
0547376 RM-303 MEA-7 SAKURA RED LATIN NY
0547383 RM-303 MEA-8 SAKURA RED LATIN NY
0547385 RM-303 MEA-9 SAKURA RED LATIN NY
0547386 RM-303 MEA-10 SAKURA RED LATIN NY
0547387 RM-303 MEA-11 SAKURA RED LATIN NY
0547388 RM-303 MEA-12 SAKURA RED LATIN NY
0547390 RM-303 MEA-13 SAKURA RED LATIN NY
0547392 RM-303 MEA-14 SAKURA RED ARABIC NY
0547421 RM-303 APAC S SAKURA RED STROKE
0548072 RM-303 APAC S MALAYSIA SAKURA RED STROKE
0548073 RM-303 APAC-T SAKURA RED LATIN
0548074 RM-303 APACT PHILLIPINE SAKURA RED LATIN
0548075 RM-303 APAC U SAKURA RED
0548080 RM-303 APAC-V SAKURA RED STROKE NY
0548081 RM-303 APAC W SAKURA RED LATIN
0548082 RM-303 APAC X SAKURA RED STROKE
0548083 RM-303 APAC-P SAKURA RED BOPOMOFO
0548085 RM-303 APAC-Q SAKURA RED STROKE
0548109 RM-303 APAC-R SAKURA RED STROKE
0548675 RM-303 EURO-A WARRIOR BLUE LATIN
0548678 RM-303 EURO-B WARRIOR BLUE LATIN
0548679 RM-303 EURO-C WARRIOR BLUE LATIN
0548680 RM-303 EURO-C UK WARRIOR BLUE LATIN
0548681 RM-303 EURO-C FR WARRIOR BLUE LATIN
0548685 RM-303 EURO-C ALS WARRIOR BLUE LATIN
0548686 RM-303 EURO-C TR WARRIOR BLUE LATIN
0548692 RM-303 EURO-D WARRIOR BLUE LATIN
0548721 RM-303 EURO-E WARRIOR BLUE LATIN
0548722 RM-303 EURO-F WARRIOR BLUE HEBREW
0548723 RM-303 EURO-H WARRIOR BLUE GREEK
0548725 RM-303 EURO-I WARRIOR BLUE LATIN
0548747 RM-303 EURO-I WARRIOR BLUE CYRILLIC
0548748 RM-303 EURO-I RU WARRIOR BLUE CYRILLIC
0548765 RM-303 EURO-I BRMD WARRIOR BLUE CYRIL NY
0548766 RM-303EURO-I WARRIORBLUE UKRAINECYRILLIC
0548768 RM-303 MEA-1 WARRIOR BLUE ARABIC NY
0548791 RM-303 MEA-2 WARRIOR BLUE ARABIC NY
0548792 RM-303 MEA-3 WARRIOR BLUE LATIN NY
0548793 RM-303 MEA-4 WARRIOR BLUE URDU NY
0548794 RM-303 MEA-5 WARRIOR BLUE FARSI NY
0548796 RM-303 MEA-6 WARRIOR BLUE LATIN NY
0548798 RM-303 MEA-7 WARRIOR BLUE LATIN NY
0548801 RM-303 MEA-8 WARRIOR BLUE LATIN NY
0548802 RM-303 MEA-9 WARRIOR BLUE LATIN NY
0548803 RM-303 MEA-10 WARRIOR BLUE LATIN NY
0548804 RM-303 MEA-11 WARRIOR BLUE LATIN NY
0548805 RM-303 MEA-12 WARRIOR BLUE LATIN NY
0548818 RM-303 MEA-13 WARRIOR BLUE LATIN NY
0548819 RM-303 MEA-14 WARRIOR BLUE ARABIC NY
0548821 RM-303 APAC S WARRIOR BLUE STROKE
0548822 RM-303 APAC S MALAYSIA WARRIORBLUE LATIN
0548823 RM-303 APAC-T WARRIOR BLUE LATIN
0548826 RM-303 APAC-T PHILLIPINE WAR. BLUE LATIN
0548832 RM-303 APAC-U WARRIOR BLUE, THAI
0548869 RM-303 APAC-V WARRIOR BLUE STROKE NY
0548870 RM-303 APAC-W WARRIOR BLUE, LATIN
0548874 RM-303 APAC-X WARRIOR BLUE, STROKE
0548888 RM-303 APAC-P WARRIOR BLUE BOPOMOFO
0548889 RM-303 APAC-Q WARRIOR BLUE STROKE
0548891 RM-303 APAC-R WARRIOR BLUE STROKE
0551708 RM-303 5310 AMER-L LTA DEFAULT RED
0551741 RM-303 5310 AMER-L LTA DEFAULT BLUE
0554778 RM-303 SWAP EURO-C SAKURA RED LATIN
0554813 RM-303 SWAP EURO-C WARRIOR BLUE LATIN
0554848 RM-303 SWAP EURO-C FR SAKURA RED LATIN
0554849 RM-303 SWAP EURO-C TR SAKURA RED LATIN
0554850 RM-303 SWAP EURO-F SAKURA RED HEBREW
0554851 RM-303 SWAP EURO-H SAKURA RED GREEK
0554852 RM-303 SWAP EURO-I RU SAKURA RED CYRILL
0554853 RM-303 SWAP EURO-I SAKURA RED UKRAINE CY
0554854 RM-303 SWAP MEA-1 SAKURA RED ARABIC
0554855 RM-303 SWAP MEA-13 SAKURA RED LATIN
0554857 RM-303 SWAP EURO-C FR WARRIOR BLUE LATIN
0554858 RM-303 SWAP EURO-C TR WARRIOR BLUE LATIN
0554860 RM-303 SWAP EURO-F WARRIOR BLUE HEBREW
0554861 RM-303 SWAP EURO-I RU WARRIOR BLUE CYRIL
0554862 RM-303 SWAP EURO-H WARRIOR BLUE GREEK
0554863 RM-303 SWAP EURO-I WARRIOR BLUE UKRAINE
0554864 RM-303 SWAP MEA-1 WARRIOR BLUE ARABIC
0554865 RM-303 SWAP MEA-13 WARRIOR BLUE LATIN
0556140 RM-303 APAC-U WARRIOR BLUE THAI CTV_THAI
0556152 RM-303 APAC S WARRIOR BLUE STROKE CTV_SG
0556156 RM-303 APAC S SAKURA RED STROKE CTV_SNG
0556177 RM-303 APAC U SAKURA RED THAI CTV_THAI
0556705 RM-303 5310 MEA-4 CTV MUSIC PK RED
0556708 RM-303 5310 MEA-4 CTV MUSIC PK BLUE
0556775 RM-303 APAC-W SAKURA RED LATIN NY
0556776 RM-303 APAC-W WARRIOR BLUE LATIN NY
0556818 RM-303 5310 EURO-A TELENOR NO RED
0556852 RM-303 WARR. BLUE APAC T LATIN CTV_PHI
0556858 RM-303 SAKURA RED APAC T LATIN CTV_PHI
0556859 RM-303 BLUE APAC T LATIN OPV_OPTUS
0556860 RM-303 SAKURA RED APAC T LATIN OPV_OPTUS
0556861 RM-303 BLUE APAC T LATIN OPV_GLOBE SIM
0556862 RM-303 RED APAC T LATIN OPV_GLOBE SIM
0556863 RM-303 APAC-P SAKURA-RED BOPOMOFO CTV_TW
0556864 RM-303 APAC-P WARRIOR-BLUE BOPOMO CTV_TW
0556880 RM-303 5310 MEA-11 CTV MUSIC KE RED
0556881 RM-303 5310 MEA-11 CTV MUSIC KE BLUE
0557146 RM-303 5310 MEA-6 CTV MUSIC NG RED
0557147 RM-303 5310 MEA-6 CTV MUSIC NG BLUE
0557162 RM-303 5310 MEA-14 CTV MUSIC AE RED
0557163 RM-303 5310 MEA-14 CTV MUSIC AE BLUE
0557200 RM-303 5310 MEA-1 CTV MUSIC MEA1 RED
0557201 RM-303 5310 MEA-1 CTV MUSIC MEA1 BLUE
0557203 RM-303 5310 MEA-2 CTV MUSIC MEA2 RED
0557204 RM-303 5310 MEA-2 CTV MUSIC MEA2 BLUE
0557214 RM-303 5310 MEA-3 CTV MUSIC MEA3 RED
0557215 RM-303 5310 MEA-3 CTV MUSIC MEA3 BLUE
0557665 RM-303 CHINA-Q WARRIOR BLU STROKE CTV_HK
0557674 RM-303 CHINA-Q SAKURA RED STROKE CTV_HK
0557675 RM-303 CHINA-R WARRIOR BLUE STROK CTV_CN
0557676 RM-303 CHINA-R SAKURA RED STROKE CTV_CN
0557687 RM-303 APAC S BLUE STROKE OPV_SINGTEL
0557692 RM-303 APAC S RED STROKE OPV_SINGTEL
0557719 RM-303 5310 MEA-13 MTN ZA RED
0557720 RM-303 5310 MEA-13 MTN ZA BLUE
0558028 RM-303 5310 APAC-T VODA LIVE NZ RED
0558554 RM-303 APAC T SAKURA RED LATIN AU
0558555 RM-303 APAC T WARRIOR BLUE LATIN AU
0558968 RM-303 5310 EURO-A TELENOR NO BLUE
0560738 RM-303 APAC-U WARRIOR BLUE THAI OPV_UD
0560739 RM-303 APAC U SAKURA RED THAI OPV_UD
0562912 RM-303 CHINA-R WARRIOR BLUE STROK CTV_CN
0562916 RM-303 CHINA-R SAKURA RED STROKE CTV_CN
0562917 RM-303 APAC-P WARRIOR-BLUE BOPOMO CTV_TW
0562920 RM-303 APAC-P SAKURA-RED BOPOMOFO CTV_TW

I posted all variants from RM-303_DP20_3.00__sw-05.81, in case others need it
If NSU sais "No software updates for your phone" with one code, just try another

BR

[cBaldan]

Guys,

I´m from Brazil, I just bought my Nokia 5310 last week and I´m interested in the 5.81 firmware for my phone.

It is a RM-303 Red and it currently has V3.63. It´s code under the battery is: 0559871

I followed the guide in the first post, but when looking for the files to delete in the referred folder i the guide, the filed I found were:
rm303__03.63.mcusw
rm303__03.63.ppm_l
rm303__03.63_ISM_001.image_l_red_5310_TIM

TIM is the name of my cel phone company, and only the first file I listed has the same name as flamekeeper posted, the other ones have similar sizes but different names. I didn´t rename the files from the zip I to the similar ones because I´m afraid to get a paperweight :rolleyes:

1) Can anyone tell me if it´s secure, in my case, to rename the files and update my cell phone? Or should I only wait for it to come available from Nokia?

I deleted the downloaded files in the folder, placed the ones from the zip and clicked the retry button in the NSU without renaming the files, but it started downloading it all again..

2) What is the SIM code? Is it the PIN of the SIM card?

Congrats to flamekeeper and everybody else that may come and help all of use :)

[richiricherd]

Hey cBaldan just replace rm303__03.63.mcusw and rm303__03.63.ppm_l for this two http://rapidshare.com/files/116710176/5.81flashfiles.rar i make it personaly for you and all my brazilians friends for update to version 5.81 and conservate latinamerican languages ;)

[cBaldan]

Hello richiricherd,

Thanks for the file. Those 2 files now have the exact same name as 2 of the ones the NSU had downloaded, but I haven´t flashed yet.

Can you, or someone who is sure, confirm to me the following?

1) The third file the NSU donwload for my phone has a very different name then the one in the rar file flamekeeper posted ( it even has the name of the cell phone operator I use ). Can I simply rename and flash? Is it really safe?

2) What is the SIM code? Is it the PIN of the SIM card?

Once again, thanks to everyone.

[richiricherd]

Hello richiricherd,

Thanks for the file. Those 2 files now have the exact same name as 2 of the ones the NSU had downloaded, but I haven´t flashed yet.

Can you, or someone who is sure, confirm to me the following?

1) The third file the NSU donwload for my phone has a very different name then the one in the rar file flamekeeper posted ( it even has the name of the cell phone operator I use ). Can I simply rename and flash? Is it really safe?

2) What is the SIM code? Is it the PIN of the SIM card?

Once again, thanks to everyone. Do not rename the third file, that containe your operator logoes and themes, just let it like it is..
and yes sim code is the pin of the simcard, the phone will ask for it when update has finished only if you have that option activated.. however that code is 0000 by defect ;)

[nonearfear]

Flamekeeper, renegade65....thanks! It finally worked.

[cBaldan]

Do not rename the third file, that containe your operator logoes and themes, just let it like it is..
and yes sim code is the pin of the simcard, the phone will ask for it when update has finished only if you have that option activated.. however that code is 0000 by defect ;)


Hi there guys!

I´m just posting here to thank immensely thansk flamekeeper and richiricherd ( and google also for bringing me here :p ) for the tutorial and the special files for Latin languages.

I followed the tutorial and everything worked fine. After the download, the update proccess was quite fast and now my 5310 already has fimware v 5.81. Thanks guys!

1) The only funny thing is that after the update and reboot, my cell did not ask for the PIN number, it just booted.

2) After the update process my cell phone lost some stuff: configs I made, and my contacts - it only had operator´s default service numbers.
On the other hand, no pictures or received files ( bluetooth ) got lost from the cell phone memory. Nothing lost in the expasion card.

3) I took a backup of configs and contacts with the appropriate nokia software, but it only set back the contacts :mad:

But it was worth. Thanks guys!

[Sandbox Wizard]

What I recommend you my friend is to use Product Code 0558555 and run normally NSU, because for that code firmware 05.91 was officially released and the language pack is the same your phone has right now (English, Chinese, Japanese, Philippine, Vietnamese. With this code you won't have to do anything else but to let NSU normally upgrade your phone. Latter you can change back your original Product Code.

I'm trying to update a Canadian (RM-304) phone to 5.91. I tried using the 0558555 Product Code suggested here, but the NSU didn't find any updates. I can't find a list of RM-304 Product Codes to try, could you suggest one? If you need it the letters at the end of language information are NR0.

Thanks

[Sandbox Wizard]

Forgot to add, my current Product Code is 0560340.

[Sandbox Wizard]

Courtesy of flamekeeper: Use NSS to change your Product Code to 0558988 if your phone is blue or 0551710 if it's red and then update normally using NSU.

Worked for me.

Sidenote: the update wiped all my carrier (Rogers) customizations and settings. Had to use this to get the web browser working again: http://www.omegacell.com/help.htm

[charged2885]

Thanks guys for the hard work.

I'm on t-mobile and my phone code was 0558989 (red). I tried to follow the directions but can't get NSU to see any updates. Every time it says there were no updates (I don't even get the reinstall option). Would it be wise to reset my code to 0558989, then run the update and stop it at ~26% and continue the tutorial there?

Any other suggestions are also welcome.

Edit: Should I try using 0551710 like Sandbox Wizard suggests? I'm not sure what I'd have to do to get the web browser working if the same thing happened to me.

[charged2885]

I can't edit my post again so I'll recap what I did as I want as many t-mobile customers to be free from the tyranny of big business in the land of the free. I ended up using 0551710 as flamekeeper via Sandbox Wizard suggested. I did not follow the tutorial in the OP. Perhaps this deserves its own thread in another forum.

Anyways,

I first made a backup of my settings on the 5310. Then I changed the product code to 0551710 using NSS. I ran NSU and updated the firmware normally. This was the only Product Code out of about a dozen that I tried which let me re-install the firmware. Once re-installed, I just restored from my backup and t-zones wap settings worked with Opera Mini and the like.

[ladoctora]

Dear flamekeeper,
Everything was going alright until step no. 17, when I had to reconnnect the USB cable and click the button in the NSU. When I clicked the update button, it didn't work at first, I had to click it for more than 10 times until it finally started to update.
Meanwhile there was a message saying that the phone was being updated, the status bar remained in blank. And after more than 40 mins. without any changes in the status bar, I decided to disconnect the USB cable.

Then I tried to repeat the whole process, but there's a little problem now: the NSS software SCAN button doesn't recognize my mobile phone (in lower left status bar there's a message saying "scan of product ... Error".

Any solutions?

Thanks in advance from Barcelona. (next time I'll write to you in spanish ...)

[thomasfz6]

Hello,I'm french and I need some help. I search the product code of a 5310 who can works in France with the network Orange.Because I have a new Simcard with Orange and my 5310 doesn't work. (The network was Virgin at first).So if someone know a product code for me for Orange in France.Thanks a lotRegardsThomas

[gkong]

Hello,I'm french and I need some help. I search the product code of a 5310 who can works in France with the network Orange.Because I have a new Simcard with Orange and my 5310 doesn't work. (The network was Virgin at first).So if someone know a product code for me for Orange in France.Thanks a lotRegardsThomas

Sounds like you have a locked phone, buy codes to unlock it. Debranding will not remove the lock placed by Virgin.

[cloud_ink]

so, i have followed those exact steps, and when i reach the part where i disconnect the phone and replace the files with those from the archive i see that they do not have the same name, even worse the original ones(those that the program downloaded) are for version 5.81 , in fact in nsu i see something like current phone version : 3.36 and update version : 5.81 so it wants to update to 5.81 without me replacing the files from the archive. And i don't know what to do(update without the files from the archive? or change the names?). I would really appreciate some help!, Thanks!

[zahed1978]

Thnx for sharing nice work

[TheBuzzer]

Do you have American US Product Code?

And if I use American Product Code, does it work with the files that you furnish?

Marc

[cBaldan]

so, i have followed those exact steps, and when i reach the part where i disconnect the phone and replace the files with those from the archive i see that they do not have the same name, even worse the original ones(those that the program downloaded) are for version 5.81 , in fact in nsu i see something like current phone version : 3.36 and update version : 5.81 so it wants to update to 5.81 without me replacing the files from the archive. And i don't know what to do(update without the files from the archive? or change the names?). I would really appreciate some help!, Thanks!



Dude,

Seems like the update is already officially available for your phone. NSU is doing all the work, you don´t need to follow this hack tutorial ( download files, run NSU, disconnect phone, change files, reconnect, etc ).

Just read what NSU tells you.

[ZeroCool1974]

No matter what product code I use, NSU doesn't let me reinstall the firmware, using NSU latest version 1.4.39pt-br, is there an oldest version that let me do this process? Only options here are [Try Again] and [Cancel]. Using the product code 0546968 it let me install the new fw but without my default language 'ppm_l', the same as cBaldan. What should I do?!

Can I install 5.81 with foreign languages and after that change product code again to restore brazilian portuguese? It would be safe to do so?

Thanks for the great work! :)

Obs: I'm using NSS 1.0.38.14, any problems with this version? I changed product codes many times with no problems so far.

[]'s

[Hengst]

I noticed the same as cloud_ink during unbranding and did as cBaldan said... Nothing changed, phone still branded (t-mobile). Product code i'm using is 0546968. Before that i tried 0551710, but this does not give me the reinstall option... Am i missing something? thx in adv, hengst

[markolic]

Uhm why does this not work with rm-304, how do i get this firmware update :confused: also i have a canadian blue handset (Rogers)

[richiricherd]

Uhm why does this not work with rm-304, how do i get this firmware update :confused: also i have a canadian blue handset (Rogers)This code will work for you 0551739 just update normally with NSU and you will get 7.01 version

[lukestrike_br]

hey folks!!!

first of all thank you flamekeeper for the awesome work.

so this is what happened for me. i just needed to change the product code in order to NSU allow me to normally update to 5.81.

im also from BRazil so I wanted to restore the brazilian portuguese language to my phone, but as well as ZeroCool and other users, my NSU doesnt show the option REINSTALL, even after i restored my original product code back to my phone.

does anyone knows what i can do ?

ps: i've read some stuff about a 5.91 firmware, does anybody knows about this ? does it really exist? and what can I do to upgrade to it ?

thank you very much!!!

[lukestrike_br]

another thing : after the update, the navigation key shortcut icons on the desktop (those four) have disappeared. does anybody know how to enable them back ?

[win_1be]

Hello! First thanx to you guys, explanations and everything seems really clear!

Actually I just bought 5310 two days ago. Im in belgium and I got already firmare 5.81. I downloaded all files mentioned in the first post but didn't do anything yet. In fact, the only thing i want is to add Japanese linguage in my phone. For the moment I got European language package (letter C after *#0000#); the code under the battery is 0546968.

I'd like to keep Frensh language if possible, but if I can have Japanese and english its ok. What can I do the best? is it another way to add japanese or do I have to flash the firmware? And Can I flash it if im already in 5.81?

Thank you, and sorry if my english's not perfect ;)

kevin

[mexicanwolf]

hey bro i have n5310 xm my is(NOKIA 5310 XM. V 05.91 20-02-08 RM-304 VARIANT 00.00 LENGUAGE V 05.9A RM-303 U TINK THAT HELP 2 ME IN SOME TING I LIVE IN USA!!

[wjuc]

He guys, I registered here to thank all for the useful info in this topic. Another way to update your 5310: Change the Product Code of your phone to the one that "Win 1be" posted. The updater will just anounce that its time to install 5.81. Afterwards change the code back.

[wjuc]

Darnit, I have to add now: my MP3 player works fine, no reboot whatsoever. Now I have trouble calling: It seems to reboot almost every time I call out, and also when I receive phonecalls. This happens with or without an sd-card, that doesnt seem related.

Please let me know what the cause could be . . .

[ZeroCool1974]

I updated mine, it's working very good but I don't have my default language PT-BR, just PT-PT, anybody can tell me how to install it back? I have changed the product code and nothing happens, NSU doesn't let me reinstall or nothing else.

[]'s

[Gripitoy]

hi, i'm having trouble downloading from rapidshare, i have a blue nokia 5310.. can anyone host it on another server please? thanks... like 4shared.com

[win_1be]

yo,
I got trouble with NSU. I connect my phone, push start then next... wait then "Connection Error" is coming.

___" Sorry, the Nokia software updater service is currently unavailable. Plz disconnect your device and try again later." ___

Is it unavailable because of my phone or because of nokia server?

Thank you guys.

[win_1be]

I checked on nokia.com and actually it seems 5310 is not in the list of supported phones... but if it works with you guys i don't understand...

[ZeroCool1974]

I checked on nokia.com and actually it seems 5310 is not in the list of supported phones... but if it works with you guys i don't understand...

NSU updates are offline for the last 4 days, worldwide! Don't be afraid, it's not your phone, possibly Nokia updating/managing servers.

[]'s

[sjz]

NSU updates are offline for the last 4 days, worldwide! Don't be afraid, it's not your phone, possibly Nokia updating/managing servers.

[]'s
Confirmed.
Nokia 5310 is not in the list of supported phone for Nokia Software Updates.
Why is it like that? They purposely remove this phone?
Even Nokia 5300, 5610, 5700 is in the list.
Me too having the same problem with the member, it says
"Sorry, the Nokia Software Updater is currently unavailable."
Please let me know more info.:(

[waterfire]

HelpI can't find this folder C:\Documents and Settings\All Users\Application Data\Nokia\Nokia Service Layer\A\nsl_service_module_00001\vpls\www.dsut.onl ine.nokia.com.oti.caresuite\Products\rm-303 what should i do?i figured it out that there is no sub-folder "nokia" in the folder "Application data"what should i do?need your help guys

[waterfire]

"Sorry, the Nokia software updater service is currently unavailable. Plz disconnect your device and try again later" i have this kind of problem too on NSU

[dermarkus]

i have the same problem like waterfire, i couldn't find the mentioned folder in Application Data\....
i only have this folder c:\documents andsettings\ bla bla\Nokia Service Layer\A\logs

do i have to install anything previous to get this folder?

[mostafa_fon]

good work andwait anews work

[lukasz1]

look here: http://forum.gsmhosting.com/vbb/showthread.php?t=572930

[yeba123]

Guys i need help ive update my nokia 5310 to the latest firmware 7.01 bit i need a euro languange ive change all product code listed but only 0562920 and the other one supports 7.01 guys i need help to change language on firmware 7.01

[GSM FAST]

there is u r 5310 flash file


only mcu,ppm,cnt

downlode here

http://www.4shared.com/file/60487653/415063d1/5310_rm_303__701_.html


br

GSM FAST

[waztedsoul]

Hi,

can someone help me please.. i've updated my Nokia 5310 RM-303 from V5.81 to V7.01 using a different code (0557674) my original code is 0556858,my problem is the language vesion, i think the philippine language is gone? can someone help me on how to restore it? appreciate your help..Thanks and more power to this site!

[sjin_band]

only one problem, a nokia 5310 driver, nokia pc suite does not connect my phone to pc without a driver

[Kaykha]

Hi Dir flamekeeper
Thank u for ur very nice way
I am pretty prof in upadting phones and i saw this way very very functional
Now I have some questions
1- I want to update my fathers phone and i need farsi language on it i found 0548794 product code for it but when I want to update it says no new version is ready but in the http://europe.nokia.com/A4577224 nokia says new version came for this product code.. what do u suggest??
2- I think with this way we can comeback to a previous version of firmware with its files, that is right?? (because some how i update their phone beliave that their cell become bad and want to comeback to the previous)
3- and another one that we can change the firmware of a cell with another model for example install the firmware of N82 on N73 what u think about this??

[GSM FAST]

only one problem, a nokia 5310 driver, nokia pc suite does not connect my phone to pc without a driver

bro try this one

http://www.4shared.com/file/60773393/60889c1e/Connectivity_Cable_Driver.html

br

GSM FAST

[damiri]

Hi Gurus ,

Can someone please help me in flashing my Nokia 5310b Blue rm-304 v 3.63 , I got sick of this phone and really need to flash it to the lastest firmware so I can unlock the restrictions on my applications and ringtones ...

Can someone suggest something here , I am hopeless .... :-(

[systemdamage]

First of all, thanks to everyone who contributed here with questions and answers.

Well, I'm also from Brazil, and I started to make the process, changed my cell code to the one flamekeeper gave, and when I started NSU, the new version it detected was 8.32. Then I thought "why not to update to this new version?". I did it, without doing anything else that has been said on the main post by flamekeeper, after the update process, I just changed back to my own cell code and everything is fine.

My question is (mainly to brazillian people whose cell company is TIM): when the update finished, the extra menu items from the operator was gone, do you know how to restore it? I don't care about the language, I always use english language... =)~

Oh, it's important to notice that the ringing volume increased on version 8.32. I don't know if it increased as much as in the "hack" posted by flamekeeper, but I liked it... Even I wanted it more loud, but patience... Perhaps that's enough...

Thank you!

[peba0706]

My phone cannot use it's camera, and when I plug in my 3.5 mm jack, it can't use my headset (it's not playing music to it). Are those annoying things will disappear if I upgrade my sw?

[meknes gsm]

thank you!!!!!!!!!!!!!!!!!!!!!!

[DaniM4]

sir/s,

i just bought a china red 5310, v3.6 rm-303, i just want to know if i upgrade to v5.8, will my fone have a personal message alert?

right now i'm quite satisfied with the volume of the fone, both background and headset.


thanks so much

[DaniM4]

sir/s,

can anyone pls post pix of upgraded fone, i just want to see it before i upgrade.

another thing, my friend has an original 5310 blue, its version is v3.6 rm-303 also, we have same wallpapers and screensavers, only mine is red, and he has a personal message alert.

can i flash his original firmware and load to my china 5310?

thanks in advance

[wjuc]

He guys, just a quick update from me about rebooting problem: they replaced my phone, and everything is fine with this one. The way I see it theres a bunch of these phones with bad hardware!!

[mjk]

So what do you guys do in the event of a warranty if the phone needs repaired/replaced? Where do you find provider firmware, since there's no way to downgrade via nsu.

[palash_c6]

updated verson is here

http://forum.gsmhosting.com/vbb/showthread.php?t=608858


P@lash_c6
BANGLADESH

[Bisoy]

Regards to everybody who had commented here. Let's begin with some responses. First: Nokia released new versions for NSU and PC Suite. Both of them come with the new Nokia Connectivity Cable Driver which is incompatible with NSS and that's why you all get the "error" message when trying to change Product Code (yes, Nokia always making things harder for us!!). So, the solution is uninstalling ALL Nokia software from your PC, particullary using the path Control Panel>Add or remove software. There you will find the new Nokia Connectivity Cable Driver and some "Nokia Flash Cable Driver". You must uninstall too those two in order to be able to install later the old version of Nokia Connectivity Cable Driver which works fine with NSS. You can find it here: http://www.nokia.co.uk/A4841138

Having this cable driver installed then you can change Product Code (use the one according your phone color). Once you've changed it you can install NSU and run it normally. DO NOT PAY ATTENTION TO THE GUIDE'S STEPS FOR NSU UPDATING because the firmware update was officially released for the Product Codes I gave. You won't have to do anything but let NSU run normally, follow all the instruction in the software.


Personalized responses:
sojournerx: If you follow my advices on this post then you can be able to change your Product Code and remove that anoying language pack of your phone.

silviutzu24: If you dial *#0000# on your phone you can see the info about firmware pack installed already on your phone and if you press the "down" navegation button you will see another info concearning the language pack. The last line should be a single letter or a code (like A, B, C or M12, etc). I need to know which letter do you have (if it's C then you can follow my indications on this post and do the normal procedure). Don't worry, all I want is to let you preserve your Rummanian language on your phone. If you don't care then follow my instructions on this post. If you care then reply me so I can give you another Product Code.

mbarros: That's normal because the NSU never remove GSM operator personalization (pitty). The good thing is that you have now a good musical phone with less crashes episodes..and better volume too!!

gustavofehrenba: Your problem is because what I describe in this post. Surely you have the cable driver incompatibility problem. Follow my instructions and you will be fine!

sir, i still hav the same problem even w/ the this nstruction. please help me

[jhd25147]

there is u r 5310 flash file


only mcu,ppm,cnt

downlode here

http://www.4shared.com/file/60487653/415063d1/5310_rm_303__701_.html


br

GSM FAST
who have 5310 t-mobile phone rm-304 code 0558989 flash file plese tell me

[asghar_khan870]

how to put languages easily in 5310 nokia.

[asghar_khan870]

I need to put purtagues mean brazilian language. can some one tell me easy way for 5310 in universal box. cause i have only universal box. thanks

[sjin_band]

help..nokia pc suite for 5310 does not recognize my phone, 5310 which is a china phone and i want to flash it with a new firmware..dont know what to do..

[jobberwalk007]

to flamekeeper (http://forum.gsmhosting.com/vbb/member.php?u=720891) & to all concerned:

this is china phone 5310... is it possible to update the firmware using your steps????

when I enter *#0000# ======>>

_____________________________

NokIa 5310
XpressMusic
V 03.60
13-09-07
RM-303
(c)NokIa
Varian: 255.02t

Language:
V 03.60
13-09-07
RM-303
(c)NokIa
S

______________________________


...hoping for a clear reply!...

a lot of tnxxxxxxxxxxxxxxxx in advance!!!

[jobberwalk007]

i cant change my themes and msg tone..


tnxxxxxxxxx in advance!

[jobberwalk007]

the pc suite cannot detect my phoneeeeeee??


plsssssss help me..


thanks in advance!!

[sjin_band]

me too..pc suite wont detect my phone 5310

[xXDarkenSoulXx]

Hey everyone. Flamekeepers method worked for me, but i need a rm-304 code for china or hong kong, either one would work. Also, would the english 304 flash files work with a chinese code? Thanks.

[ITF]

Hi, I just bought the Red Nokia 5310 XpressMusic. I did the *#0000# and it says my phone is RM 304 v5.91, but my language is RM 303 with v 5.91

I haven't done anything to it, it's just out of the box. I bought it as a gift for my cousin in China. I just need the Chinese simplified input added. Will this tutorial still work? I'm not sure since I see both 304 and 303.

Also, I found a list of product codes and pack names on some websites, and specially pertaining to the Chinese, someone bolded the ones that might be helpful. I was wondering if anyone knows which of these include the "Pin Yin" input method and not the stroke input.

Here they are:

0556156 RM-303 APAC S SAKURA RED STROKE CTV_SNG
0557676 RM-303 CHINA-R SAKURA RED STROKE CTV_CN
0557692 RM-303 APAC S RED STROKE OPV_SINGTEL
0562916 RM-303 CHINA-R SAKURA RED STROKE CTV_CN

[ITF]

I forgot to ask a few other questions. I was looking for an "Edit" post button but couldn't find it. Sorry, don't mean to "spam"

I was also wondering what controls the languages on the phone: the product code or the RM-###? I'm not sure what controls what, and if the firmware itself contains the languages or if the firmware is the RM... Debranding the phone in the process would be a nice bonus, but I'm mainly looking to add the Chinese Simplified PinYin input method to it, but not sure what part of the phone controls what. Any insight will be great.

I'm really new to this "flashing phone" idea.
Thanks!