andr3_jc
03-25-2008, 19:02
pls need urgent i-mobile 315 flash file...after format phone dead.[A7210_6225_06B_PCB03_GPRS_MT6225_S00.7S7210AA00-001-R2E.BIN]
i have backup but when try to write report error..
Loading data, wait...
[Infinity Box] v2.33
S/N: 00000000000
Wait...
Device: Autodetect 6205-6227 NOR
Done
Loading file v.02...
Loading failed, probably damaged data file.
detecting languages...
Languages: not detected
Loading file v.02...
backup_eeprom[A7210_6225_06B_PCB03_GPRS_MT6225_S00.7S7210AA00-001-R2E.BIN]_20080324-190502.B0E.bin loaded
COM8 ready
COM8 [Serial2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
skip:
skip:
skip:
write:
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:0103:000B
boot step size: 0400
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 10 sec
thx...
i have backup but when try to write report error..
Loading data, wait...
[Infinity Box] v2.33
S/N: 00000000000
Wait...
Device: Autodetect 6205-6227 NOR
Done
Loading file v.02...
Loading failed, probably damaged data file.
detecting languages...
Languages: not detected
Loading file v.02...
backup_eeprom[A7210_6225_06B_PCB03_GPRS_MT6225_S00.7S7210AA00-001-R2E.BIN]_20080324-190502.B0E.bin loaded
COM8 ready
COM8 [Serial2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
skip:
skip:
skip:
write:
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:0103:000B
boot step size: 0400
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 10 sec
thx...