Sucsefful flashe and unlock E101

[foufou34]

Sucsefful flashe and unlock E101 WITH WRITE EEPROME


COM3 [VCP3] selected
Device: Alcatel E101
"advanced chip detection" active
Action: flash write
"smart write" active
Skip: Firmware
Skip: Flex
Skip: Language Pack
Skip: FFS/File system
Skip: Images
Skip: Melody
Write: Eeprom
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection...
Check connection done
Set baud...
203125
Set baud done
Check hardware...
flash: 012A7E2A242A00:54000000000000
flash: AMD/Fujitsu std [T 003Fx010000 0004x004000] 4Mb
Check hardware done
Read data...
reading Alcatel E101_eeprom_calibration-1...
file saved: C:\Program Files\InfinityBox\HModule\backup_Alcatel E101_eeprom_calibration-1_20080326-182909.80E.bin
reading Alcatel E101_ffs...
file saved: C:\Program Files\InfinityBox\HModule\backup_Alcatel E101_ffs_20080326-183101.80E.bin
Read data done
Check data...
Check data done
Writing...
Area: Eeprom
flash: 012A7E2A242A00:54000000000000
Write: Eeprom
Writing done
Finished, time used: 214 sec
Remove/Install battery now !

[zinoubinabil]

hi;
thx for test report

[MOBICOM]

which eprom for unlock?

[InfinitySupport]

Hello,

Please, let me little bit more information, what was initial phone state and what ios phone state now.
Also, please, send eeprom backup (and flash backup if exist) files to InfinityBoxSupport@gmail.com

Thank you very much !

[prostomne]

Thanks, Infinity-box !

[ktienda]

eprom or flash???

can u post it

thank u....

[..::: Naveed :::..]

Wow thats really gud news can we unlock all network/version Alcatel E101

[jamil fernandez]

I am from Nicaragua have Alcatel E101a of Movistar operator and cannot unlock, I cannot unlock Alcatel E-101a with flash of Infinity, After flash the EEPROM not tape-worm signal change the logo moviatar but always lock sim.

I wait for response

[InfinitySupport]

I am from Nicaragua have Alcatel E101a of Movistar operator and cannot unlock, I cannot unlock Alcatel E-101a with flash of Infinity, After flash the EEPROM not tape-worm signal change the logo moviatar but always lock sim.

I wait for response

Hello,

Do you have original flash backup ?
If yes, please send it to InfinityBoxSupport@gmail.com to check.

[InfinitySupport]

@jamil fernandez
Try to use this software for unlock: http://www.infinity-box.biz/download/public/InfinityUpdate_HModule_v1.11.rar
Waiting for your results

[gesundheit]

COM7 [VCP2] selected
Device: Alcatel E101
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection...
Check connection done
Set baud...
115200
Set baud done
Check hardware...
flash: 012A7E2A242A00:54000000000000
flash: AMD/Fujitsu std [T 003Fx010000 0004x004000] 4Mb
Check hardware done
Read data...
reading Alcatel E101_eeprom_calibration-1...
file saved: C:\Program Files\InfinityBox\HModule\backup_Alcatel E101_eeprom_calibration-1_20080328-173934.80E.bin
Read data done
Check data...
Check data done
Writing...
..
flash: 012A7E2A242A00:54000000000000
Write: simlock
Writing done
Finished, time used: 353 sec
Remove/Install battery now !


took a while waiting for SW during finalizing

fone unlocked. BTW, i used the 1.11 version.

How bout adding phone code/reset function?

[InfinitySupport]

Hello,

Thanks for test report.
More functions is under development.

We are waiting for more different flash backup files at InfinityBoxSupport@gmail.com

[fera]

You Are The Best Box What I Have WHORKED FOR ME SUCSESUFUL UNLOCED.

[gesundheit]

Another experiment: Lock code - Same fone I unlocked awhile ago
I put the fone in phone lock code mode :D
Action: Write repair EEPROM (from support)
Result: No more Phone Code!


COM7 [VCP2] selected
Device: Alcatel E101
"advanced chip detection" active
Action: flash write
"smart write" active
Skip: Firmware
Skip: Flex
Skip: Language Pack
Skip: FFS/File system
Skip: Images
Skip: Melody
Write: Eeprom
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection...
Check connection done
Set baud...
115200
Set baud done
Check hardware...
flash: 012A7E2A242A00:54000000000000
flash: AMD/Fujitsu std [T 003Fx010000 0004x004000] 4Mb
Check hardware done
Read data...
Read data done
Check data...
Check data done
Writing...
Area: Eeprom
flash: 012A7E2A242A00:54000000000000
Write: Eeprom
Writing done
Finished, time used: 132 sec
Remove/Install battery now !

[InfinitySupport]

@gesundheit
Thanks a lot for good test reports !

[mrfixit]

I just got e101a and make backup for u in a short while.

[mrfixit]

just sent to InfinityBoxSupport@gmail.com 1.53mb, hope it helps.

[mrfixit]

unlocked ok too, I tried with other box (multi) but their support is not helpfull at all, cannot even download their latest updates (and of course its my fault, always blame the user), so tried with infinity and in short time it's done, thank you infinity u always no1, userfriendly and very helpful.

COM68 [VCP0] selected
Device: Alcatel E101
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection...
Check connection done
Set baud...
812500
Set baud done
Check hardware...
flash: 012A7E2A242A00:54000000000000
flash: AMD/Fujitsu std [T 003Fx010000 0004x004000] 4Mb
Check hardware done
Read data...
reading Alcatel E101_eeprom_calibration-1...
file saved: D:\Program Files\InfinityBox\HModule\backup_Alcatel E101_eeprom_calibration-1_20080422-201005.80E.bin
Read data done
Check data...
Check data done
Writing...
..
flash: 012A7E2A242A00:54000000000000
Write: simlock
Writing done
Finished, time used: 72 sec
Remove/Install battery now !

[hallo]

unlocked ok too, I tried with other box (multi) but their support is not helpfull at all, cannot even download their latest updates (and of course its my fault, always blame the user), so tried with infinity and in short time it's done, thank you infinity u always no1, userfriendly and very helpful.

COM68 [VCP0] selected
Device: Alcatel E101
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection...
Check connection done
Set baud...
812500
Set baud done
Check hardware...
flash: 012A7E2A242A00:54000000000000
flash: AMD/Fujitsu std [T 003Fx010000 0004x004000] 4Mb
Check hardware done
Read data...
reading Alcatel E101_eeprom_calibration-1...
file saved: D:\Program Files\InfinityBox\HModule\backup_Alcatel E101_eeprom_calibration-1_20080422-201005.80E.bin
Read data done
Check data...
Check data done
Writing...
..
flash: 012A7E2A242A00:54000000000000
Write: simlock
Writing done
Finished, time used: 72 sec
Remove/Install battery now !
..one phone like these one above, and after Unlock, with SIM inside "MEPD not present!"...any sogestion?
Thank's in advice.

[Formingus]

Wrong Pinouts on Pic i swap the rx and tx works fine :)
Regards

[InfinitySupport]

..one phone like these one above, and after Unlock, with SIM inside "MEPD not present!"...any sogestion?
Thank's in advice.

Hello,

Did you checked phone before unlock ?

[hallo]

Hello,

Did you checked phone before unlock ?
..I checked before i make unlock, but only power on the phone and try to unlock....now, if I write calibrationBackUp a same thing and same mesage....any way....what these info means? "MEPD not present!"
:confused:

[InfinitySupport]

..I checked before i make unlock, but only power on the phone and try to unlock....now, if I write calibrationBackUp a same thing and same mesage....any way....what these info means? "MEPD not present!"
:confused:

Phone can not be damaged after unlock with Infinity-Box. I think phone was "MEPD..." already before unlock.
We have no methods yet to repair this kind of problem.

[InfinitySupport]

Wrong Pinouts on Pic i swap the rx and tx works fine :)
Regards

Hello,

Here is some information: http://www.gsmhosting.net/vbb/showpost.php?p=3282447&postcount=47

[hallo]

Phone can not be damaged after unlock with Infinity-Box. I think phone was "MEPD..." already before unlock.
We have no methods yet to repair this kind of problem.
...any way...thank's for Your time...Cheers

[Formingus]

Hello,

Here is some information: http://www.gsmhosting.net/vbb/showpost.php?p=3282447&postcount=47



Information
:confused:
Ok any way thks
Just clear about pinouts

So members no need to try like i do...
They can do it at first time (no need for experiment)
Regards ;)

[mazentel..]

i flashed it but hi s still locked what can i do???????

[InfinitySupport]

i flashed it but hi s still locked what can i do???????

Hello,

You need to use "sp-unlock" button for unlock.